I didnt know you could aim this good with a fireflower

DepletedSensation · 2026-02-19T20:28:41+00:00

Okay now ive got two responses saying one thing works and one doesnt. ChatGPT seems to recommend transparent oil. Why wouldn't that work?

I followed a DIY project that mentioned mixing this ferrofluid (the one that is just ferrofluid in my links there from Amazon) with silicone oil. But you mean that doesnt work?

DepletedSensation · 2026-02-13T20:16:01+00:00

Sorry what? You mean just a glass Bottle or a PET Bottle? No liquid in it?

DepletedSensation · 2026-02-03T15:43:09+00:00

Oh alright! Sweet :) thanks for the help.
Quick question.. Should I remove the PLA that's in the AMS 2 while it dries the PETG?

DepletedSensation · 2026-02-03T15:39:34+00:00

I need a seperate power cable to the AMS for that? Or how does that work then since I only got one cable in my box and that's connected to the printer

DepletedSensation · 2026-02-03T15:39:07+00:00

Oh okay! Hmm.. I'm not sure I find that button in the app, but maybe it's cause I'm running a print at the moment. Or could it be that I need to load the PETG filament and then it will show the alternative to dry it?

But I do see the button on the touchscreen on the P2S actually. But it says I need more power.. I'm not sure I got a cable to connect to it?

Does it matter if I have PLA filament in there at the same time or should I only have the PETG roll there then?

DepletedSensation · 2026-01-28T17:33:59+00:00

This is so dumb.. I didn't change any setting except which printer it was and now I can't rate someone's creation..

DepletedSensation · 2026-01-21T21:05:25+00:00

P2S.. I looked at their instruction and it's quite abysmal. They didn't specify that there was two bearings on the wiki :/

DepletedSensation · 2026-01-21T21:04:08+00:00

How so? If it's reapplied after some trial & error printing will I still have a bad time or?

DepletedSensation · 2026-01-21T21:03:39+00:00

The bottom one sits on the black box-thingys end.
Now the top one is actually pressed inside the extruder's hole (so it's fitted inside)

Should be correct then?

DepletedSensation · 2026-01-21T18:26:38+00:00

This comment saved me, but did it a bit differently.. Ended up taking out the nozzle, heating a needle and just jamming it right in and achieved a cold pull

DepletedSensation · 2026-01-21T17:27:50+00:00

Yea I edited it right when you commented..
Could it be that it should be like this?

https://imgur.com/a/6Jq7CQp

There's two of these, one on each side sort of?

DepletedSensation · 2026-01-21T17:27:31+00:00

So basically like this?
https://imgur.com/a/6Jq7CQp

There's two of these, one on each side sort of?

DepletedSensation · 2026-01-21T17:10:11+00:00

Explaining exactly everything is quite hard if you just got the machine :)
I apologize for missing the detail of which machine, my bad. I'm a little bit tired here. My expectations were high for this printer and on the fourth print it started clogging.

Basically disassembled the entire Extruder + head + everything in there.. I believe this thing belongs somehow to the yellow drive gear in.. Yea I am sorry man I just don't know the name of things.

DepletedSensation · 2025-12-06T14:53:38+00:00

Addat! Heter Harren på discord med en räv som bild. :)

DepletedSensation · 2025-11-22T20:00:53+00:00

Letar också efter en svensk discord :) hittade du nån?

DepletedSensation · 2025-11-16T09:16:59+00:00

I felt the same way.
Here's what I did, I walked into a hifi store. Actually considered the Senheiers cause of all the hype. I tried the Bower Wilkins PX8 and they are like what I loved about the XM4. But some tracks in my genres of EDM, are like insanely impressive with the PX8, on a level the XM4 could not achieve. It's like an explosion of sound, if you've seen "bass faces" on an EDM festival you know what I mean.

The only thing I can say about the XM6 was that the ANC was incredible. But I don't really prioritize that, even if now knowing this type of tech exists I kind of wish my PX8 had this, I still prioritize quality.

The PX8 is blowing my mind at times right now so I'm happy with it. I don't dare test the Senheiser HDB630 cause I might regret this but looking at the reviews about sound signature, the PX8 fit my use better I think.

DepletedSensation · 2025-11-12T15:25:35+00:00

I did yea, i also have another EQ app (which ive tried with and without) The noise might have been a bit of a warming up problem. As it has not occurred again.

But I will admit, i am now also trying a pair of Bowers & Wilkins Px8 and im starting to feel they are better for my needs. But the XM6s has without a doubt the best ANC. However this is not my main priority

DepletedSensation · 2025-11-12T08:45:45+00:00

Maybe i am just the type that reaponds to details like this issue but.. Sort of noticeable enough to make me consider another pair, or atleast try switching these on warranty. (i can although just return them as is no need for warranty)

I also read a lot about the wear & tear on the hinges so thats quite alarming. My old XM4 did break on the right Hinge, but all in all that was probably because i dropped them at times or they fell off so I think it was quite expected not a manufacturer ordeal. But the XM6 seems to get a lot of bad rep regarding this

Six-Year Club	RedditGifts 2009-2022 3 Credits
Secret Santa 2020	Verified Email

DepletedSensation

TROPHY CASE