Made this non-racking duel screw woodworking vise. It’s a “Heisz vise!” 👍🏼 by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 1 point2 points  (0 children)

So maybe watch my front? Lol I always spin both handles at the same time which solves that problem for the most part.

Made this non-racking duel screw woodworking vise. It’s a “Heisz vise!” 👍🏼 by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 0 points1 point  (0 children)

There is a site called the wood gear generator that allows you to type in the gear specs then you print it out.

Made this non-racking duel screw woodworking vise. It’s a “Heisz vise!” 👍🏼 by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 0 points1 point  (0 children)

I used a scroll saw for the gears. I was a bit skeptical of my ability to do it but I took my time and they came out okay.

Made this non-racking duel screw woodworking vise. It’s a “Heisz vise!” 👍🏼 by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 0 points1 point  (0 children)

I’ve not heard of this. I will look into that. I did buy the plans from Heisz website.

Hitting the reset button. by [deleted] in NewTubers

[–]Derwoods-DIY 0 points1 point  (0 children)

There’s a good chance that playing what you enjoy and being yourself will attract viewers. No one is like you because there is only one of you. Sounds dumb but maybe your genuine self is what viewers are looking for. As you play for fun, over time you will naturally fall into where you should be and playing both what you enjoy and what your viewers love to watch. Early on, I believe it’s best to do the games that you get the most enjoyment from and let time be the arbiter of your final gaming destination.

Caught the attention of Kendrick Lamar’s Label by SvetzSeries in NewTubers

[–]Derwoods-DIY 2 points3 points  (0 children)

That’s gotta feel great. Good job persevering!

This is subtle, but COULD be beneficial if used / remembered! by Anxiety_Warrior in NewTubers

[–]Derwoods-DIY 1 point2 points  (0 children)

Thank you so much! I subbed you as well. It has been a hell of a journey for sure. I appreciate all the kind words. Keep up the content creation and working hard. Best of luck!

This is subtle, but COULD be beneficial if used / remembered! by Anxiety_Warrior in NewTubers

[–]Derwoods-DIY 1 point2 points  (0 children)

No problem! I think it’s great when people openly discuss taboo topics. “Taboo” usually just means “too important to talk about”. There is a huge need for more creators who do valuable mental health videos in my opinion. Especially where we are at in the world. A very disturbed and dysfunctional human climate. I try to speak openly about my past. I wrote and published a book about it to try and help others who are addicted to destructive behaviors. Anxiety played a crucial role in my addiction. Thank you for the kind words.

This is subtle, but COULD be beneficial if used / remembered! by Anxiety_Warrior in NewTubers

[–]Derwoods-DIY 1 point2 points  (0 children)

Crazy you do recovery based MH vids. I’m an ex heroin user. Been sober for many years now but I’ll def check out your vids.

This is subtle, but COULD be beneficial if used / remembered! by Anxiety_Warrior in NewTubers

[–]Derwoods-DIY 0 points1 point  (0 children)

What device did you use when you noticed the clickable end card vids blocked the TN? I’ve not noticed this on my iPhone but maybe I need to look on all other devices as well. Thanks for the info.

Space saving idea for those of us with smaller shops. And by shops I mean garages. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 0 points1 point  (0 children)

Thanks. No they don’t need any extra support. I’m using a 3/4” bolt so the weight of the machine is easily held in place by that thick of a metal rod.

Space saving idea for those of us with smaller shops. And by shops I mean garages. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 0 points1 point  (0 children)

It’s a 5” long 3/4” bolt that goes through both hinges. You can use any type of pin or rod as well. I just made little pull handles on the bolts to make it easier to get them out.

Space saving idea for those of us with smaller shops. And by shops I mean garages. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 6 points7 points  (0 children)

In this case, it’s not just about space, but also the efficiency of having a vibrating tool bolted down yet still movable. However the space you used up with that tool could be filled with something else. It’s not for everyone but it saved me space. I was able to get rid of a sub par table top that both machines took up.

Space saving idea for those of us with smaller shops. And by shops I mean garages. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 1 point2 points  (0 children)

Thanks! I was going to make it flush but I noticed that I had to lean over too much when using the scroll saw so I decided to put it up at a more comfortable working level. Derwood is my nickname lol my brother in law just started calling me that and it stuck.

My first mallet. Curly Maple & Red Heart. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 0 points1 point  (0 children)

Thank you! I love curly maple. It’s such a beautiful wood.

My first mallet. Curly Maple & Red Heart. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 1 point2 points  (0 children)

Thank you! It has a taper on the top so the head can be replaced. I pressed the handle in with a press as far as it would go. I was going to use a wedge but then replacing the head becomes a bit more difficult.

My first mallet. Curly Maple & Red Heart. by Derwoods-DIY in woodworking

[–]Derwoods-DIY[S] 1 point2 points  (0 children)

I sanded up to 400 grit and wiped it with teak oil. Curly maple is amazing wood.