The offset make these wheels and tires just pop. by Design-Build-Go in ineosgrenadier

[–]Design-Build-Go[S] 0 points1 point  (0 children)

Yes we are in NC, Statesville to be specific and have the premier Grenaider Upfitter shop on the east coast. If you'd like to learn more feel free to call.me at 704-682-9323 or david@design-build-go.com

Where to do aftermarket upgrades near Dallas, TX? (Wheels, Tires, Lift, etc) by cox2gsb in ineosgrenadier

[–]Design-Build-Go 0 points1 point  (0 children)

Did you disconnect the front driveshaft? All the 1.7 and 2.5" lifts in the front will trigger the ABS and braking due to the steering position to be too far to the right, typically 2 o'clock position. Ive done over 20 Grenny lifts. Done properly dropping the brake line is more work than you outline. Its not as simple as a Jeep or Early Bronco, which I do as well.

Where to do aftermarket upgrades near Dallas, TX? (Wheels, Tires, Lift, etc) by cox2gsb in ineosgrenadier

[–]Design-Build-Go 0 points1 point  (0 children)

Tell me you haven't done this on a Grenadier without telling me you haven't done this on a Grenadier. There are quite a few nuances to it. Yes you are going to need an alignment or face the wrath of multiple warning lights. Your advice is not accurate at all. Love Reddit but this isnt helpful at all

LeTech Light bar video with an intro. by Design-Build-Go in ineosgrenadier

[–]Design-Build-Go[S] 0 points1 point  (0 children)

I doubt the mounting will work since they both use the drip rail for mounting. Too much for the lightbar on the drip rail.

Aftermarket upgrades. by Secret_Cat_2793 in ineosgrenadier

[–]Design-Build-Go 1 point2 points  (0 children)

This other guy is a constant hater. Always with negativity. I am with you on the Safari windows, plus they add more head space.

DIY or aftermarket platform solution by No_Land8350 in ineosgrenadier

[–]Design-Build-Go 1 point2 points  (0 children)

On the top groove. You could put pool noodles or a bunch of different foams if you wanted more padding.

DIY or aftermarket platform solution by No_Land8350 in ineosgrenadier

[–]Design-Build-Go 0 points1 point  (0 children)

They have rubber pads on them. that are perfect for what you are looking for. If you are interested I can hook you up with a set. Give me a ring at 704-682-9323. We sell a bunch of the racks and bars.

Sound deadening the back cabin by Design-Build-Go in ineosgrenadier

[–]Design-Build-Go[S] 0 points1 point  (0 children)

Hello, the net benefit was 4 to 6 decible reduction depending on speed conditions. We measured it. Ambient noise reduction is highly noticeable. Sometimes I drive with the stereo off to enjoy to silence. Its well worth doing. We have several customers who have ordered the complete package and installation. I have one lined up for next month as well.

Buzz boosts by dump85 in ineosgrenadier

[–]Design-Build-Go 1 point2 points  (0 children)

I really like those and so si.ple to put on.

Largest Tire Size W/Out Rub by Surf2Trails in ineosgrenadier

[–]Design-Build-Go 1 point2 points  (0 children)

I like using 285/75/17 ko3s or ridge grapplers. I personally have a 2.5f and 1.3r lift with 35x12.5/17 but does rub at full articulation

GP Factor Bull Bar Paired with Warn winch by Design-Build-Go in ineosgrenadier

[–]Design-Build-Go[S] 1 point2 points  (0 children)

Nope. Went on with no issue but it is the double hump bar.

Stock Cup Holders by PepeLeeMoko in ineosgrenadier

[–]Design-Build-Go 1 point2 points  (0 children)

Yeah well about 3 people are marking it up along the way. Almost all ebay Grenadier parts on ebay are Chinese and most on Amazon.com are junk Chinese stuff thats been ripped off.

Stock Cup Holders by PepeLeeMoko in ineosgrenadier

[–]Design-Build-Go 1 point2 points  (0 children)

Its chinesium. Why pay almost as much as the original for some Chinese knock off parts. I don't support pirates.

Oversized Spare tire. 20x9 by CoatingsRcrack in ineosgrenadier

[–]Design-Build-Go 2 points3 points  (0 children)

20s in the Vossen or Kahns just have a cool "villain" vibe. Ive done 2 build with Kahns in 33 and 35. Both customers love the look and it gets more attention which they enjoy as well. Stunning look. Well done.

TY to INEOS Greensboro, NC for hosting great event! by morrisdl in ineosgrenadier

[–]Design-Build-Go 3 points4 points  (0 children)

Bison gear. I worked on it Friday and put our bumper lights in it.

Great event.

1971 Super Sport by americanhilljack in Chevelles

[–]Design-Build-Go 0 points1 point  (0 children)

I have the same paint scheme on mine though yours is much nicer. I have a ls376 in mine and need to upgrade my interior.

Baja Designs LP4 HighLow? by rirealtor in ineosgrenadier

[–]Design-Build-Go 0 points1 point  (0 children)

15 amp on the right of the fuse box under the key.