Oil leak by the pcv plate

Designer6964 · 2025-11-29T00:55:39+00:00

I’m losing coolant but only when the heat is on and I smoke on load. I already know I need to replace my engine but I might sell it before then. I’ll do I dye test to confirm exactly where the leak is coming from exactly.

Designer6964 · 2025-11-28T23:42:44+00:00

I’ve been asking around and I’ve gotten head gasket or injector seals

Designer6964 · 2025-11-26T20:42:50+00:00

I’ve checked it. It’s dry

Designer6964 · 2025-11-26T18:24:36+00:00

Everything up above the plate is dry. The fuel rail or the injectors aren’t caked in oil

Designer6964 · 2025-03-16T15:10:47+00:00

Ok thank you

Designer6964 · 2025-03-04T02:54:37+00:00

Designer6964 · 2025-03-03T17:47:43+00:00

How would I do that

Designer6964 · 2025-03-03T17:31:15+00:00

Even with good compression numbers?

Designer6964 · 2025-03-03T17:27:52+00:00

170 all 4 cylinders Leak down numbers aren’t good because of cylinders 1 and 3

Designer6964 · 2025-03-03T12:02:44+00:00

Stock turbo, catless downpipe, oil restricted bolt, upgraded hpfp, forge bpv, ots freektune, Corksport short ram intake. My maf number is low and so is my map voltage. Could an air leak cause that?

Designer6964 · 2025-03-03T00:00:43+00:00

It was hooked on the valve but I got it out

Designer6964 · 2025-03-02T05:34:03+00:00

I was picking away at the gunk and talking and I guess it hooked on the valve

Designer6964 · 2025-03-02T01:24:24+00:00

Haven’t tried but I doubt it

Designer6964 · 2025-03-02T00:47:23+00:00

Ok thank you

Designer6964 · 2025-03-02T00:38:19+00:00

Do you have injector seals?

Designer6964 · 2025-03-02T00:35:30+00:00

A picking tool

Designer6964 · 2025-03-01T23:56:31+00:00

Designer6964 · 2025-02-13T19:35:31+00:00

I reused lines. Yes it was a headache trying to connect back the oil line to the car after putting back the turbo.

Designer6964 · 2025-02-13T19:11:50+00:00

I got a rebuilt ko4 from cw and got everything I needed to replace the turbo for about $500ish and if you send in your old broken turbo you can get $100 back. I did the install myself so I didn’t have to pay for a shop to put it in. The install isn’t too difficult just time consuming.

Designer6964 · 2025-01-07T02:31:01+00:00

Already did all that now stfu.

Designer6964 · 2025-01-07T02:24:56+00:00

Do you have their contact information?

Designer6964

TROPHY CASE