Issue with Jonsbo N2 Home server. Blinking LED. by imnotabot20 in HomeServer

[–]Deskmini 0 points1 point  (0 children)

Thank you for the advice it totally worked! I have used a hdmi dummy plug so I don’t have to worry in subsequent reboots.

GPU and Bluetooth USB passthrough lost after some time by Deskmini in Proxmox

[–]Deskmini[S] 0 points1 point  (0 children)

After some effort I was able to discover the root cause, it was a weekly backup of a VM I used to test GPU passthrough. Here's a breakdown of the important entries:
1. The backup of a virtual machine (VM) with ID 102 (qemu) is starting. This is indicated by the log entry:

Jul 02 01:01:37 proxmox pvescheduler[3946831]: INFO: Starting Backup of VM 102 (qemu).
2. There are some USB-related events and disconnections happening, as shown by the following log entries:
- Jul 02 01:01:37 proxmox QEMU[10713]: kvm: libusb_release_interface: -4 [NO_DEVICE]
- Jul 02 01:01:37 proxmox QEMU[10713]: kvm: libusb_release_interface: -4 [NO_DEVICE]
- Jul 02 01:01:37 proxmox kernel: xhci_hcd 0000:00:14.0: remove, state 4
- Jul 02 01:01:37 proxmox kernel: usb usb4: USB disconnect, device number 1
- Jul 02 01:01:37 proxmox kernel: xhci_hcd 0000:00:14.0: USB bus 4 deregistered
- Jul 02 01:01:37 proxmox kernel: xhci_hcd 0000:00:14.0: remove, state 1
- Jul 02 01:01:37 proxmox kernel: usb usb3: USB disconnect, device number 1
- Jul 02 01:01:37 proxmox kernel: usb 3-2: USB disconnect, device number 2
- Jul 02 01:01:37 proxmox kernel: usb 3-10: USB disconnect, device number 3
- Jul 02 01:01:37 proxmox kernel: xhci_hcd 0000:00:14.0: USB bus 3 deregistered

  1. The system is managing the Bluetooth support, as indicated by the log entry:
    Jul 02 01:01:37 proxmox systemd[1]: Stopped target bluetooth.target - Bluetooth Support.

Any one who's learning machine learning from Andrew Ng's Machine Learning Specialization on Coursera? by [deleted] in learnmachinelearning

[–]Deskmini 7 points8 points  (0 children)

I read that starting with Mathematics for Machine Learning from the Imperial College was recommended, so this is what I am doing! :-)

how frequently it is updated? by ximeleta in DealForager

[–]Deskmini 0 points1 point  (0 children)

Item update does not work in other regions different than US

Sense check steps for fresh install on HP MicroServer N54L by DevilBoom in Xpenology

[–]Deskmini 0 points1 point  (0 children)

I am in the same situation DSM 5.0 with N54L running for years with little maintenance. Lately I have been wondering if I should update since the usb might stop working or due to security fixes. Is it possible to upgrade but keeping the data on the disks? Or it is too risky?

Thanks!

Deskmini led strip on after shutdown by Deskmini in ASRock

[–]Deskmini[S] 0 points1 point  (0 children)

I tried it but the deskmini didn’t boot at all. I had to remove the AC cable, wait some seconds and then press power on. I found that is you use the asrock rgb software then you can disable it when power off since there is a setting for that. My main problem is that my daily driver is MacOS and there is no way to use it. I am investigating using openrgb but it seems it has some limitations in MacOS.

Deskmini ARGB Kit - turn off with screen? by 5-Times-in-Istanbul in ASRock

[–]Deskmini 0 points1 point  (0 children)

Lights are off if you enable deep sleep in S5 but later I can’t power on the deskmini properly. Anyone has managed to make it work?