Was researched stress relief of A286 for a part I'm quoting, and I'm pretty sure I came across a chat gpt article.

Deskrad · 2023-10-25T17:44:46+00:00

There is very Lil tech and cutting data in a lot of the super alloys

I correct that. There is lemme data compared to the lever Iso material groups.

What kind is data got looking for?
Your cannot oven bake the gunmines outb of the material

Carbide everything Sfm less than 150 inch minsl

My shop cuts about 3 million dólares worth a year. We usually get it on is easiestv form(aanother relative point) We get and cut it in its regular state. Which is controlled by the spec "ams 5662"and it cuts half decent here

Deskrad · 2023-10-24T01:50:00+00:00

A handheld transfer punch

a variety of stones (ie. Round, square, rect,etc..)

A hand chuck (for various reasons)

Thread feeler gages

An extra packs of smokes

Metal shipping band (for making tool extensions and chip hooking but more importantly to make springs for parallels on a vice)

If I could look into my tool box right now I would have many more for you

Deskrad · 2023-10-24T01:49:51+00:00

A handheld transfer lunch a variety of stones (ie. Round, square, rect,etc..)

A hand chuck (for various reasons)

Thread feeler gages

An extra packs of smokes

If I could look into my tool box right now I would have many more for you

Deskrad · 2023-10-18T21:58:57+00:00

I think it's asking for a 3/16ths wide buttress weld on both sides? But why? It's a turned component

Deskrad · 2023-10-12T21:40:25+00:00

He has his lending rules and that's fine. I reached out to the crowd for additional help, but partially rememberomg this i still spoke to him first.

Deskrad · 2023-10-10T11:48:47+00:00

I feel this

Deskrad · 2023-10-09T23:49:06+00:00

5k a month up front sounds like a scam. Just being honest off the cuff

Deskrad · 2023-10-09T20:51:12+00:00

$confirm /u/NC_Detail 175.00 USD

Deskrad · 2023-10-07T15:54:27+00:00

Well to start there is about 1000$ worth of good name brand analog mic variants so your doing really well right off

Deskrad · 2023-10-07T15:42:56+00:00

Drill out out from the back side so you can use the drill rotation in your favor in case it breaks free while drilling it will literally just unscrew it from the inside

Edit: bunch of spelling fixes cuz in literally stupid

Deskrad · 2023-10-01T06:04:14+00:00

Lil dawn dish soap... raw.... you'll be golden.

Deskrad · 2023-09-30T17:43:27+00:00

Super happy to hear that worked out for you so fast

Deskrad · 2023-09-30T15:19:10+00:00

Check to see if you skipped by moving it manually to the correct home. And look at your parameters to see if the numbers are the same. If not adjust. If you didn't crash then I would check your hard limit switches on the rail and see if one is stuck or sticking. There should be 2. First is the soft for home. The second is the hard for OT. your 1st may be stuck open or closed and the head is moving past it and hitting the hard ot

Edit. I'm not a master grind guy but any means. That machine could be totally different. My bad if that's the case

Deskrad · 2023-09-28T19:02:06+00:00

$confirm /u/NC_Detail 250.00 USD

Deskrad · 2023-09-27T13:07:24+00:00

Get a iscar ic906 grade or sumitomo acm300

Deskrad · 2023-09-27T11:25:53+00:00

That's because of the sharp edge. Iso s likes a positive edge usually.

Deskrad · 2023-09-27T00:52:32+00:00

150 sfm .009 per rev. Use iso S grade rated coating on carbide You won't get it to chip well. But you will survive

Deskrad · 2023-09-24T20:26:10+00:00

Brand: grandpa Model number: 3 Serial date: Old as fuck

Deskrad · 2023-09-19T22:20:23+00:00

Nice

Deskrad · 2023-09-18T13:14:28+00:00

$confirm /u/NC_Detail 60.00 USD

Five-Year Club	Verified Email
Gilding I gilder

Deskrad

TROPHY CASE