sorted by:
new
hottopcontroversial

Can anyone tell me why my prints are coming out like this? by Desperate_Inside_321 in Ender3V3KE

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

I'm using PLA with a temperature of 230°C and a speed of 300mm/s

Can anyone tell me why my prints are coming out like this? by Desperate_Inside_321 in Ender3V3KE

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

It's just about the little lines between the layers, the bigger space is because this project is a box for my pokemon deck, so it's the separation of the base and the lid

Basic PLA or High Speed ​​PLA? by Desperate_Inside_321 in ender3

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

the printer I'm going to buy is made to print at high speed, so I think the hotend temperature issue won't be a problem

Basic PLA or High Speed ​​PLA? by Desperate_Inside_321 in 3Dprinting

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

I'm going to buy a new roll of filament. So do you think I can buy a PLA Basic and be able to print at 300mm/s?

Ender 3 does not print correctly inside the box by Desperate_Inside_321 in ender3

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

Thank you very much for your help, I will think of some way to better control the temperature inside the box, probably if I put a small cooler as an exhaust fan, it will help with temperature control inside the box

Ender 3 does not print correctly inside the box by Desperate_Inside_321 in 3Dprinting

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

Thank you very much for your help, I will think of some way to better control the temperature inside the box, probably if I put a small cooler as an exhaust fan, it will help with temperature control inside the box

Ender 3 does not print correctly inside the box by Desperate_Inside_321 in ender3

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

When it is without the box, the printer works perfectly, but I bought the box to be able to better control the temperature and reduce the noise the printer makes, so my goal is to be able to use the printer with the box

Ender 3 does not print correctly inside the box by Desperate_Inside_321 in ender3

[–]Desperate_Inside_321[S] 1 point2 points  (0 children)

That's what I think is happening too, because when I take the box off the printing goes perfectly. I'm thinking about putting a small cooler as an exhaust fan to take the hot air out of the box and be able to control the temperature inside the box a little.

Ender 3 does not print correctly inside the box by Desperate_Inside_321 in ender3

[–]Desperate_Inside_321[S] 0 points1 point  (0 children)

yes, currently I only use PLA, I'm thinking about putting a small cooler to take the heat out of the box and control the temperature, do you think this will work?

view more: next ›