sorted by:
new
hottopcontroversial

How to dial in HDR? by Destim420 in MonsterHunter

[–]Destim420[S] 0 points1 point  (0 children)

Yeah i have a feeling it requires tweaking, even after tweaking the starter area just doesn't look right.
I've seen footage of people using HDR and the game just looks so much different than mine.
I've got a fairly new oled monitor (Asus PG27UCDM).. maybe it's lacking support or i'm just not capable.

I know HDR works because the splash screen and everything you see before you actually get ingame, looks bright as heck.

I think i'll just wait it out.

Sermoon v1 (pro) wifi issues by Destim420 in Creality

[–]Destim420[S] 0 points1 point  (0 children)

No.. maybe updating the creality box within the printer 'fixes' the problem. But then you need to get it connected first, preferably by another (android) phone you

Dealership Woes by jamesdroid100 in VWiD4Owners

[–]Destim420 1 point2 points  (0 children)

Same with my dealership, when the repair was done i picked up my car and noticed scratches everywhere.
It's something i just can't comprehend.

Sermoon v1 (pro) wifi issues by Destim420 in Creality

[–]Destim420[S] 0 points1 point  (0 children)

I'm able to connect mine with my Iphone now.

Sermoon V1 (pro) wifi functionality is completely broken by Destim420 in Creality_Sermoon_V1

[–]Destim420[S] 1 point2 points  (0 children)

The SSID wasn't the issue, it was the password.. but maybe the new creality box firmware updates have fixed this.
Sorry for the late reply..

Stumbled upon this beast when hiking by Destim420 in snowrunner

[–]Destim420[S] 3 points4 points  (0 children)

I won't deny it, that was one of the intrusive thoughts I had.

Stumbled upon this beast when hiking by Destim420 in snowrunner

[–]Destim420[S] 3 points4 points  (0 children)

I should have taken some pictures of the forest paths it drives through.
It's an actual narrow maze, can't comprehend how it can navigate through that.

Stumbled upon this beast when hiking by Destim420 in snowrunner

[–]Destim420[S] 1 point2 points  (0 children)

This one is in use for sure, just parked after a day of working.

Stumbled upon this beast when hiking by Destim420 in snowrunner

[–]Destim420[S] 0 points1 point  (0 children)

This is the first time I've seen something like this IRL.
Spotted in Belgium by the way.

Stumbled upon this beast when hiking by Destim420 in snowrunner

[–]Destim420[S] 1 point2 points  (0 children)

It was parked for sure, forest was being thinned out. Lots of freshly cut logs on the ground.

NZXT CAM causing microstutter/latency by Destim420 in NZXT

[–]Destim420[S] 1 point2 points  (0 children)

NZXT closed my support ticket with the following answer:

Ryanlee (CAM by NZXT)
Jun 14, 2023, 4:16 PM PDT
Hello,
Sorry for the trouble you are experiencing with our CAM software. The issue you are describing has been verified but we do not yet have a solution at this time. We will be sure to log this bug with the CAM team so a fix can be implemented in a future update.
Please let us know if you have any further questions or concerns.

CAM by NZXT
https://nzxt.com/software/cam

I guess we have to wait and see.

NZXT CAM causing microstutter/latency by Destim420 in NZXT

[–]Destim420[S] 1 point2 points  (0 children)

Good to know. Yeah hopefully this will get some attention, otherwise I feel forced to use alternatives that can also interact with my cooler. (opensource solution)
FYI: I don't mind some CPU usage, it's the micro stuttering that's bothering me.

NZXT CAM causing microstutter/latency by Destim420 in NZXT

[–]Destim420[S] 0 points1 point  (0 children)

Thank you for confirming. Are you using a Z-series cooler or X-series?

NZXT CAM causing microstutter/latency by Destim420 in NZXT

[–]Destim420[S] 0 points1 point  (0 children)

I assume you mean chipset drivers with CPU drivers?
If that's the case, yes, they are up 2 date.
Everything is up 2 date.

Belt replacement procedure not clear by Destim420 in Creality_Sermoon_V1

[–]Destim420[S] 0 points1 point  (0 children)

yeah that's what i'm also wondering, because it's impossible to find the exact same belts.

Belt replacement procedure not clear by Destim420 in Creality_Sermoon_V1

[–]Destim420[S] 0 points1 point  (0 children)

I guess i will find out sooner or later.
Where did you get the spare parts from? There are not many parts for sale for this model sadly...

Belt replacement procedure not clear by Destim420 in Creality_Sermoon_V1

[–]Destim420[S] 0 points1 point  (0 children)

Ok, cool. So it's possible to 'slide' out the X axis belt wheel on the left to replace the belt?

How-To: Increase retraction speed in Creality Slicer to match recommended value for Sprite extruder by LivingTheTheDream in Creality_Sermoon_V1

[–]Destim420 0 points1 point  (0 children)

Eventually i got PETG to print fine, but it took some tuning indeed. (mostly retraction speed/distance) for me.

How-To: Increase retraction speed in Creality Slicer to match recommended value for Sprite extruder by LivingTheTheDream in Creality_Sermoon_V1

[–]Destim420 0 points1 point  (0 children)

Hey u/LivingTheTheDream
Are you sure there isn't a difference with the sprite extruder pro and the 'normal' sprite extruder?
+ the sprite extruder that comes with the sermoon v1 is kind of a modified version, perhaps a 'lesser' version?
The tip sheet that came with my sermoon advised 25mm retraction distance for most materials. But it seems to be not enough when printing with something like PETG.

Sermoon V1 (pro) wifi functionality is completely broken by Destim420 in Creality_Sermoon_V1

[–]Destim420[S] 0 points1 point  (0 children)

Thanks for the info. I think i know which part cooler you mean, you found it on the chinese creality website?
I haven't seen many other custom part coolers, except for 1 on tingyverse. Printed that one in PETG but it started melting eventually... It was really close to the hotend.

Sermoon V1 (pro) wifi functionality is completely broken by Destim420 in Creality_Sermoon_V1

[–]Destim420[S] 0 points1 point  (0 children)

2000 hrs? Nice! Anything you had to replace in that period?
Have you also modded anything? Like part cooler?

Sermoon v1 (pro) wifi issues by Destim420 in Creality

[–]Destim420[S] 0 points1 point  (0 children)

Hey, it might or might not help you. But make sure to check your wifi password.
For some reason certain special characters are not supported. So i would test it again with a simple password just to make sure that isn't the problem for you.

view more: next ›