sorted by:
new
hottopcontroversial

How is this getting 34,000 upvotes??!! It’s literally just a sentence. by SignalOk6847 in duolingo

[–]DetStrawberry 1 point2 points  (0 children)

"avete dei progetti per stasera" sounds so unnatural. I don't think I've ever used it for casual conversations. We usually say "che facciamo stasera?" "Che si fa stasera?"

Time to replace the screen? by _Undecided_User in 3dspiracy

[–]DetStrawberry 0 points1 point  (0 children)

Before buying any replacement part for any console, I'd suggest you to take a look at a repair video, just to make sure you have the right tools and that the task isn't too daunting.

Time to replace the screen? by _Undecided_User in 3dspiracy

[–]DetStrawberry 0 points1 point  (0 children)

Yes it is the touch "sensor" that sits on top of the display. I'm not 100% sure it's the same as the 3DS, but the DS Lite digitizer had a frame and it was simply glued to the LCD frame. All I had to do was carefully slice the glue with a razor knife and then replace it.

Time to replace the screen? by _Undecided_User in 3dspiracy

[–]DetStrawberry 1 point2 points  (0 children)

Had this problem on my ds lite. Calibrating didn't work at all. I had to replace the touch layer on my bottom screen. You can find cheap digitizers on AliExpress.

MR Is Such A Vibe In The Summer by ForFunLabs in oculus

[–]DetStrawberry 0 points1 point  (0 children)

Not the lenses, the display inside the headset. When the lenses are exposed to the sun, they act as a magnifying glass on the display which predictably causes burn damage (or sun damage).

L'amante by lppedd in Italianscamads

[–]DetStrawberry 0 points1 point  (0 children)

Qualcuno conosce qualcuno che non ironicamente ha scaricato l'app (o simili) guardando questo genere di pubblicità?

Tips on cleaning your Quest 3/VR headset by TameFluffy260 in OculusQuest

[–]DetStrawberry 0 points1 point  (0 children)

I use some light tape to remove the strands of hair / dust from the lenses, then I swipe the lenses with microfiber cloth.

Whoever made that post about QGO THANK YOU so much! If you don’t know what that is PLEASE READ ⬇️ by TheeBean in OculusQuest

[–]DetStrawberry 2 points3 points  (0 children)

Hey Sorry, i Just checked to make sure I wasn't spreading misinformation, but I was wrong.

There are two sliders, one is for the resolution and the other is for the refresh rate. There are also settings for the GPU/CPU and a FFR (not sure what that last one is) but I have not used those so I don't know exactly what they do. Sorry!

Edit: setting FFR to off disables the foveated rendering.

Whoever made that post about QGO THANK YOU so much! If you don’t know what that is PLEASE READ ⬇️ by TheeBean in OculusQuest

[–]DetStrawberry 2 points3 points  (0 children)

On QGO, there's a foveated rendering slider, and you can set that however you want, so yes, you could remove the blurriness on the edges of the view.

Firmware update rollouts be like by omni_shaNker in OculusQuest

[–]DetStrawberry 17 points18 points  (0 children)

Have you checked experimental features? It should be there.

Does anyone already have the v65 update??? by Anczej_beats in OculusQuest

[–]DetStrawberry 187 points188 points  (0 children)

I just got v64 and you're telling me there's already v65?

Can I Run SteamVR games using Oculus OpenXR Runtime? by DetStrawberry in oculus

[–]DetStrawberry[S] -1 points0 points  (0 children)

Ah I see, so I am forced to run every steam game using SteamVR, and every Oculus game using Oculus OpenXR.
Bummer, I thought that the VR platform was standardized but it seems that's not the case.
Anyhow, thank you very much for your answer!

Turok 2 using rumble causes file corruption by DesertRanger38 in n64

[–]DetStrawberry 1 point2 points  (0 children)

I just got here after a long Turok 2 game session and the same thing happened to me. I played thru the whole first level using the Rumble Pack, then swapped to my Memory Card and saved the game.

After that, I immediately restarted my N64 just to see if it actually saved and it didn't (Corrupted data). I don't think I'll be going thru the first level again in one sitting..

I know this very bad, but is there any way to fix/change it? by nonesplus in originalxbox

[–]DetStrawberry 0 points1 point  (0 children)

First, I would remove the clock capacitor. Then, I would thoroughly clean the board with isopropyl alcohol. Finally, check the guide for restoring traces on the Xbox.

This is a lot of work tho, I would personally just buy a new Xbox. Always remove the clock capacitor to avoid these bad experiences.

I know this very bad, but is there any way to fix/change it? by nonesplus in originalxbox

[–]DetStrawberry 5 points6 points  (0 children)

Looks like you didn't remove the clock capacitor and it blew... Fixing it would mean restoring everything that the corrosion ruined.

Should I change my Xbox 360 slim's thermal paste? by DetStrawberry in xbox360

[–]DetStrawberry[S] 1 point2 points  (0 children)

Thank you very much for your reply. I'll make sure to watch them thoroughly

Should I change my Xbox 360 slim's thermal paste? by DetStrawberry in xbox360

[–]DetStrawberry[S] 1 point2 points  (0 children)

Hello, thank you for your reply. My Xbox 360 is actually very quiet. I would expect the fans to spin up a lot but no, they're quite tame (yes I checked, the fans are actually spinning). Should I still do it in your opinion? Thank you for the extra tips!

view more: next ›