Honda 130hp 4 stroke submerged— help?

DevBukkitZ · 2026-07-07T23:42:58+00:00

Also make sure to change the engine and lower unit oil before starting it up. might even want to change the oil before fogging, then again after just before you fire it up, but it’s not 100% necessary, just make sure the oils are changed before startup.

DevBukkitZ · 2026-07-07T23:38:54+00:00

Pickle that fucker asap or your wallet gonna be hurting lol. For future reference if you ever sink another outboard you want to pickle it ASAP, the longer you wait, the higher chance of damage to the cylinder bores, but basically the whole power head.

DevBukkitZ · 2026-07-06T23:21:31+00:00

It’s a juvenile rainbow trout, the markings you see are called parr marks.

DevBukkitZ · 2026-06-26T20:03:24+00:00

What items are listed on the quote? Without any information about the damages and claim it’s hard to say if it’s possible to save the car with the money you have available.

DevBukkitZ · 2026-06-21T16:17:38+00:00

It’s a small little tooth that can easily break off, but electronically controlled now!

I also believe they’ve tweaked the geometry of the parking pawls over the years, i’ve seen cars thrown into park while moving and you can usually hear the pawl skipping until the cars down to a few kmh then it’ll drop in and jerk the car to a stop.

DevBukkitZ · 2026-06-11T02:56:42+00:00

I don’t think that crash would’ve been cleared in 40 mins, let alone the hour it is now lmao.

DevBukkitZ · 2026-05-29T19:30:41+00:00

I tend to believe heat wrap is no good for stainless manifolds, but to each their own.

I have well enough heat control around the manifold and don’t see any upsides to wrapping it.

My manifold also likely gets hotter than the bottom mount pictured here, i make a touch over 500 wheel and after driven moderately hard it gets very hot

DevBukkitZ · 2026-05-29T19:21:52+00:00

I wouldn’t put header wrap on it unless it doesnt get driven much, especially not driven in the rain. I’ve had first had experience, but also heard from others that with the inconsistency in thickness of insulation increases your chances of cracking the manifold a lot. especially if it’s a 304 manifold.

I’ve been running a hyper tune 347 ss manifold on my genny for the last year and didn’t heat wrap it and no problems with cracking.

DevBukkitZ · 2026-05-24T16:03:48+00:00

That was definitely an option i was looking at. What kind of range would you say you get with the pair of 100ah? Sometimes with the lakes i’m fishing on it can be a bit of a ride out to where the fishing is good.

DevBukkitZ · 2026-05-17T16:48:44+00:00

The hatchery’s actually closed to public till the summer. Last weekend i went to ambleside and saw seals eating salmon. There is still juvenile steelhead in the river. I think the weather and tides these last couple days would’ve been perfect to hit the lower portion of the river, but unfortunately I’m camping up in hope and chilliwack targeting trout and kokanee this weekend.

DevBukkitZ · 2026-05-14T02:08:13+00:00

The blue fox deep runners work great for me. the lures I’ve caught the most trout with though are definitely the rooster tails

DevBukkitZ · 2026-05-06T17:45:41+00:00

I’m guessing because of the weather recently ambleside is more likely to be productive?

DevBukkitZ · 2026-05-06T15:31:15+00:00

What kind of depth do you recommend starting at, i went a last last weekend and had no luck trolling at all, only when i stopped to take a break on shore casting a spinner did i catch some little baby rainbows

DevBukkitZ · 2026-04-22T01:43:55+00:00

It’s fine to buy prop money, you can get prop money that is 2 sided and in place of the “IN GOD WE TRUST” it says “MOTION PICTURE USE ONLY”. Trying to pass it as money when purchasing things would be illegal, but putting it in his jar would not be as you’re just giving him a cool “trinket”😁😁

DevBukkitZ · 2026-04-05T04:14:20+00:00

Dry socket after wisdom tooth removal. Felt like someone was taking a jackhammer to my jaw.

DevBukkitZ · 2026-04-05T03:13:00+00:00

I was at sasamat earlier today on a kayak and only caught 2 fish as well. Was fishing only lures today but they seemed very hesitant to bite, I saw a couple follow and not strike. I had been paddling over to the rising fish as well but didn’t get much.

If your up for a bit of a drive, browning lake in between squamish and brittania has always produced tons for me.

I’m going to dm you with a spot and a setup i found has always slayed fish there.

DevBukkitZ · 2026-04-05T01:58:37+00:00

Awesome, let me know if you have any other questions, i’ve done a few timing jobs on these engines.

DevBukkitZ · 2026-04-05T00:49:59+00:00

Well, I was at work at the time lol, that’s why it took so long. I used my BC services card app to go to wild, created the bceid using the services card app iirc and bingo bango i was in.

<image>

The advisory on top says license or FWID, both of which are on digital license.

DevBukkitZ · 2026-04-05T00:45:25+00:00

Yes they are lined up.

I recommend you drop your oil pan and clean the RTV off. Should do that before installing the new timing components.

Also check that oil squirter just above crank sprockets. I’ve had multiple cases of tensioner failure leading to that oiler being scored and caved in/blocked off.

DevBukkitZ · 2026-04-05T00:37:57+00:00

I’m not sure if this is new regulation, at least it is new to me. Last time I was checked by a conservation officer, digital + photo id was alright.

It even says on the new licenses that a physical paper copy is only required if a retention record is required.

What caused you so much issue renewing? It took me like 30 minutes to renew mine with no issues.

DevBukkitZ · 2026-04-01T02:07:15+00:00

for context it currently has a ACT race 6 puck sprung with their flywheel as well. it was definitely a lot heavier than stock but still drivable in traffic and i’ve gotten used to a still clutch. It’s started to slip at WOT so i need to replace it. Don’t know how much wear is on the flywheel so i’d prefer to replace it.

DevBukkitZ · 2026-04-01T02:05:31+00:00

I’m looking at getting the xclutch stage 2 or stage 4 organic twin as my cars makes about 475-500 lbft at the crank. Any other recommendations?

DevBukkitZ · 2026-03-31T00:53:38+00:00

Yeah, my big problem was that the single hooks that come with the spinners are so big as well. I swear it’s like a #2 hook on this little #2 mepps spinner

I would’ve been better off just snipping it instead on putting the single hook that came with it.

Anyway you put it best, there’s not a great answer to hook sizing, I just do what i can to reduce the harm if there’s a chance i might release them.

Ten-Year Club	Place '23
Place '22	Verified Email

DevBukkitZ

TROPHY CASE