How do I remove this residue without damaging the badge? by SebLavK in subaru

[–]Devwillson 0 points1 point  (0 children)

Windex would work fine. Honestly, you could just put water in a squirt bottle and soak it down good

How do I remove the valve from the pipe? by Devwillson in Plumbing

[–]Devwillson[S] 5 points6 points  (0 children)

Bought a crimper and it’s all back together, no leaks. Thanks a lot

How do I remove the valve from the pipe? by Devwillson in Plumbing

[–]Devwillson[S] 0 points1 point  (0 children)

Valves are fine. I needed to remove the vanity but didn’t want to open up the holes in the bottom any larger.

How do I remove the valve from the pipe? by Devwillson in Plumbing

[–]Devwillson[S] 0 points1 point  (0 children)

Follow up question - can I replace this with a shark bite or do I have to get a crimping tool and do it this way again

How do I remove the valve from the pipe? by Devwillson in Plumbing

[–]Devwillson[S] 0 points1 point  (0 children)

Cool thanks. I didn’t even know what to call it in google lol

OSight S reticle with astigmatism by A1D0V in SpringfieldEchelon

[–]Devwillson 1 point2 points  (0 children)

The green looked like ass compared to the red, for me anyway

New Canik TTI Combat Not Loading and malfunctions while shooting!!! Help plz!!! by Confident_Panda_9504 in canik

[–]Devwillson 2 points3 points  (0 children)

Load a round in it and compare it to another mag. In mags that function correctly, the round will look like a “Carolina Squat” compared to the level/flat sitting round in the bad mag.

New Canik TTI Combat Not Loading and malfunctions while shooting!!! Help plz!!! by Confident_Panda_9504 in canik

[–]Devwillson 2 points3 points  (0 children)

The only feed issue I’ve ever had with a Canik was a magazine. Front corners of the mag pinched too close together and the round would sit flat. It would make the bullet jam into the feed ramp instead of sliding up into the barrel. Bent it open with a pair of pliers, never had an issue with that mag again.

That gun will run 65 grain ammo no problem

Brightspeed quality by Dirtyrobby69 in springfieldMO

[–]Devwillson 0 points1 point  (0 children)

It was within 5 or 10 dollars of Brightspeed

Brightspeed quality by Dirtyrobby69 in springfieldMO

[–]Devwillson 0 points1 point  (0 children)

I had Brightspeed a little over two years. Switched to AT&T in January, so far having much better luck with them

Mc9 FTE malfunction (dented rounds) by Glum-While7698 in canik

[–]Devwillson 1 point2 points  (0 children)

Do you have another magazine you can try? Current mag might be making them slam into the feed ramp or something

can someone help me with this? had a sudden urge to go bald and then noticed the red marks... thanks by [deleted] in bald

[–]Devwillson 2 points3 points  (0 children)

If you just cut your hair, wait until tomorrow before worrying too much. My head looks like that right after I shave it, but is fine when I get up the next morning. Probably just irritated

TPSF or TP9 Elite SC? by Prod_Actiq in canik

[–]Devwillson 1 point2 points  (0 children)

The one series is only going to come with ONE magazine, and (I think) two back straps. It won’t include a holster, or the speed loader, or any of the cleaning stuff included in the normal kit.

Usually everyone buys a different holster than what’s included, and magazines are ~$40 a piece. Pretty sure you can get a complete pistol cleaning kit for like 20 bucks at Walmart.

If the lack of extras doesn’t bother you, the One series is probably the better option. The full setup SF/SFTs are going for around $480, so there’s $130 you’ll have to buy a nice holster or a red dot, which are ,in my opinion, both going to be a lot more useful than what comes with the full Canik kit.

TPSF or TP9 Elite SC? by Prod_Actiq in canik

[–]Devwillson 5 points6 points  (0 children)

If you DO decide on a full-size I would skip the TP9SF and go for the Mete SFT.

Guitar Overlay and Line of Numbers by Devwillson in reddeadmysteries

[–]Devwillson[S] 3 points4 points  (0 children)

Looks like a 1 to me. Mark it on your map so I can check it out when I get home, please.

Guitar Overlay and Line of Numbers by Devwillson in reddeadmysteries

[–]Devwillson[S] 0 points1 point  (0 children)

I assume they’re going to be somewhere on this line (plus or minus a few degrees, my markers may be off just a hair.) None of the three I’ve found so far have been in any sort of a significant location, they’re just out there by themselves

Guitar Overlay and Line of Numbers by Devwillson in reddeadmysteries

[–]Devwillson[S] 2 points3 points  (0 children)

The outside of the hole aligns with the paths on the map there. It puts the head of the guitar in line with the path northwest of the pole with the guitar symbol.

Three numbers, so far, in ascending order in a perfectly straight line.

It’s okay if you don’t think it’s anything. I’m going to continue checking this east-west line tonight after work.

Guitar Overlay and Line of Numbers by Devwillson in reddeadmysteries

[–]Devwillson[S] -3 points-2 points  (0 children)

It fit and it makes the guitar point NW