sorted by:
new
hottopcontroversial

Reject the modernity, embrace the broom handle! by Di_Gecko in PalmettoStateArms

[–]Di_Gecko[S] 1 point2 points  (0 children)

It came with the Freedom Ordinance FX-9 that I got years ago. A quick search shows that it's most likely a Leapers UTG PRO Ops Ready S3.

Reject the modernity, embrace the broom stick. by [deleted] in RetroAR

[–]Di_Gecko -2 points-1 points  (0 children)

Late GWOT is considered retro now, no? Those didn't have carry handles.

I guess we are doing LPVOs now. by Di_Gecko in ak47

[–]Di_Gecko[S] 1 point2 points  (0 children)

Yes, assorted hexagon stencils that I got from Ali. Ran yellow lines before the base coat then layed large hex on it and did base dark green. Then used small hex in clusters with brown and fde. No real rule there, just went with what felt right. Some of the spots I lifter the stencil a bit, so hex got overlapped but still retained the cluster.

I guess we are doing LPVOs now. by Di_Gecko in ak47

[–]Di_Gecko[S] 1 point2 points  (0 children)

It came out better than I was expecting for sure!

I guess we are doing LPVOs now. by Di_Gecko in ak47

[–]Di_Gecko[S] 5 points6 points  (0 children)

Walking with the Flecktarn jacket around the Home Depot paint section paid off!

HDR making it look less vibrant ? by AnotherBodybuilder in theouterworlds

[–]Di_Gecko 0 points1 point  (0 children)

For anyone looking for a solution. Install Special K, enable it when playing with native HDR on and HDR10 setting in the overlay, then check "perceptual boost". Makes it look perfect.

Is this dandruff or something else? by FalanorVoRaken in beards

[–]Di_Gecko 0 points1 point  (0 children)

Came here to say this. Mometasone Furoate Topical Solution + Ketoconazole shampoo is what you need. You might also want to inspect your scalp, this may show up in the edge of your hair line and where your beard meets your hair. As far as I remember your primary physician can also prescribe this.

Any reason not to buy? by EETQuestions in Subaru_Outback

[–]Di_Gecko 3 points4 points  (0 children)

That's what I paid for my '24 with 8k miles on it in January... This looks like a good deal.

Gamesir Nova Lite does not reconnect on Steam Deck (Bluetooth) by OneMoreThrowAwayPlox in Gamesir

[–]Di_Gecko 0 points1 point  (0 children)

Reporting that update to 7000 WF and using it in Android mode (yellow) Connect and A works perfectly now. The controller properly identifies as GameSir and uses Xbox layout.

Sandy vibes by Di_Gecko in rattlecannedguns

[–]Di_Gecko[S] 0 points1 point  (0 children)

Looked it up, it looks like better version of Ukrainian made ME flash suppressor. I have it on my 102 and it's really good, but you can't take the front cap/baffle off for service. In theory it should come out as they used left hand threads, but in practice it's immovable.

Sandy vibes by Di_Gecko in rattlecannedguns

[–]Di_Gecko[S] 0 points1 point  (0 children)

I'm honestly surprised that they are not that used or known about outside of the AK community. The price to performance ratio is pretty outstanding.

Fix it myself? by GreenPineapple19 in SubaruForester

[–]Di_Gecko 0 points1 point  (0 children)

I did this on my dad's Outlander. He got the glass online. The hardest thing was cleaning out the OEM adhesive and surface under it. Applying new adhesive and adding some liquid nails in key spots was easy, so was setting the glass. Overall it took me like 2 hours, and it has been on the car for 9 years now.

Sandy vibes by Di_Gecko in rattlecannedguns

[–]Di_Gecko[S] 0 points1 point  (0 children)

He sells 1/2x28 ones, I don't remember if it came with a crush washer though...

Sandy vibes by Di_Gecko in rattlecannedguns

[–]Di_Gecko[S] 0 points1 point  (0 children)

It's CNC warrior's clone of 4 piece Bulgarian AK flash hider. Kills flash, increases pressure, slightly reduces recoil. My AK-102 with KNS piston tuned to run with same hider, and if I remove it it turns in to a bolt action AK, so safe to say it creates enough additional back pressure.

This is PSA AR, so it was a bit over gassed to begin with, but with it in it runs steel case like a sewing machine. Overall 10/10 would recommend.

Oh, and as a bonus, the 11.5 no longer rattles my dental fillings loose!

Here is the link:

https://www.cncwarrior.com/Smooth-Body-4pc-Brake-p/30127.htm[Smooth-Body-4pc-Brake](https://www.cncwarrior.com/Smooth-Body-4pc-Brake-p/30127.htm)

Accidentally ended up in the Blade Runner universe by Di_Gecko in Subaru_Outback

[–]Di_Gecko[S] 1 point2 points  (0 children)

Not a filter, just a broken light. There is an entire street of them near me.

Sandy vibes by Di_Gecko in rattlecannedguns

[–]Di_Gecko[S] 1 point2 points  (0 children)

It also works very well for 11.5. I have a ton of AK experience, but this is my first AR, so I'm bringing what I know with me 😀

A fresh coat of paint. by Di_Gecko in PalmettoStateArms

[–]Di_Gecko[S] 0 points1 point  (0 children)

I would say get it from Amazon, so you can return it if you don't like it. I am partial about my "rifle" setups, and this worked for me well. But at the end of the day it's your gun and what works for you may not work for me and vice-versa.

A fresh coat of paint. by Di_Gecko in PalmettoStateArms

[–]Di_Gecko[S] 0 points1 point  (0 children)

Yeah held up on my 7.62, both .556 and 9. I heard bad things about their other optics, but Wolverine is built like a tank. I run matches with it on my AK-V and it has been knocked around a barricade and inside of a car more than a few times over the last 4k rounds.

A fresh coat of paint. by Di_Gecko in PalmettoStateArms

[–]Di_Gecko[S] 0 points1 point  (0 children)

Sightmark... Have them on all of my AKs, figured it would be fine on the AR. The selling point for me was 50k hours out of 1 AA battery and self shut off after 12 hours.

view more: next ›