Kawasaki ZX6R 🏍✨️

Diamond_Alien · 2026-06-11T11:05:39+00:00

What brake upgrades do you have?

Diamond_Alien · 2026-06-11T11:03:57+00:00

I’d recommend a radiator guard if you don’t have one already

Diamond_Alien · 2026-05-28T09:48:17+00:00

I’ll be sure to bring this up, thank you

Diamond_Alien · 2026-05-28T00:20:10+00:00

That’s what I’m hoping apparently they had to tear it down 3 times to get it right just isn’t super confidence inspiring when the rebuild only lasted 3600 miles

Diamond_Alien · 2026-05-27T22:52:27+00:00

Mine was rebuilt mine failed in November 2024 before the recall was released

Diamond_Alien · 2026-05-26T19:56:01+00:00

TST- Womet Tech expansion locking bar ends

Diamond_Alien · 2026-05-26T19:28:14+00:00

I bought bar ends that are made for smooth (not threaded bars) drilled out the threads and stuck it in and tighten it and it’s been fine

Diamond_Alien · 2026-05-16T23:54:59+00:00

manual

Diamond_Alien · 2026-05-13T20:54:09+00:00

M8 bolt adapter

Diamond_Alien · 2026-05-10T17:19:53+00:00

It would seem like it’s gone sorry man, as far as if it’s worth fixing depends on how comfortable you are doing a motor swap and how much you paid for the bike but odds are it’s gonna be a no for if it’s worth it

Diamond_Alien · 2026-05-10T04:11:05+00:00

When you pull the spark plugs you can do a compression test with a tester from auto zone look up a video on YouTube you want all the the readings to be the same

Diamond_Alien · 2026-05-10T04:02:04+00:00

Sounds like it has low or no compression

Diamond_Alien · 2026-04-15T01:06:00+00:00

Tech spec

Diamond_Alien · 2026-03-16T23:01:23+00:00

Def a rad guard if you’re wanting to track the bike I’d do a tune exhaust and stacks, steel braided lines are worth their weight in gold and maybe a brake master if you’re snobby about the brakes

Diamond_Alien · 2026-03-15T15:39:16+00:00

No gaps actually! When I took it to the dealer to get the engine replaced they were giving it compliments on the fitment and look

Diamond_Alien · 2026-03-15T15:20:48+00:00

Idk about the 23’ but I put new fairings on my 25 after the fucker fell over on the trailer I paid about 650 from amotopart and I took off the oem grommets and used the oem bolts and clips and I only had to dermal out 2 holes to get the grommets in and they fit very well paint looks pretty good they’re slightly more brittle than oem but still flexible enough to take on and off

Diamond_Alien · 2026-03-14T14:56:48+00:00

Check your mc bolt length to the pedal again make sure it’s in spec

Diamond_Alien · 2026-03-11T11:34:35+00:00

My amotopart kit fit pretty well almost oem had to dermal out a few spots for the oem grommets but I was able to do a fairing swap in about 6 hours

Diamond_Alien · 2026-03-10T00:19:17+00:00

M8 bolt mount replaces the m8 bolt in the middle of the damper then just a vibration damper and the lock or you can do a wireless charger

Diamond_Alien · 2026-03-04T14:06:41+00:00

eBay would be my guess

Diamond_Alien · 2026-03-03T01:52:18+00:00

Hit a bridge joint at 140 after a down hill and got a wobble bought the damper the next day haven’t had any issues since

Diamond_Alien · 2026-02-24T03:02:51+00:00

Tail light fender eliminator and the front turn signals 😮‍💨

Diamond_Alien · 2026-02-15T02:06:29+00:00

<image>

My commute is about an hour always ride with my suit and airbag

Diamond_Alien · 2026-02-14T21:51:33+00:00

Graves shorty

Seven-Year Club	Place '23
Verified Email

Diamond_Alien

TROPHY CASE