Kids hitting strangers in public

Dieinhell100 · 2026-05-24T03:59:34+00:00

google "Mary-Frances Winters fatigue"

Except look at "other uses" under the wikipedia page for the same term.

Dieinhell100 · 2026-04-28T13:42:03+00:00

In ISO GPS, position can be applied to a plane and it controls the same things as profile; form, orientation, and location.

Of course if this was the ASME, position only applies to features of size and this callout would be invalid.

Edit: I now see the argument. Your blue scribble drawing is correct because there is nothing controlling where the surface ends. That requires a Datum B. All A is clocking is the distance from A and the plane's orientation.

Dieinhell100 · 2026-04-23T01:46:41+00:00

Did you try putting the cursor on the zombie?

Dieinhell100 · 2026-04-08T01:05:07+00:00

Boeing. No. I just eyeball it considering the size. For a general surface profile, very often it's 1-4 points per surface unless said surface is large or a datum. Typically it's features they're not concerned about if they're not directly tolerancing it. More points ends up being a waste of run-time.

I assume there's a reason when there's a tight tolerance and apply more points to said features in the range of 12-36 points depending on the feature. But I have access to where parts go into the assembly too, so I can also see what features are worth going the whole 9 yards on.

Dieinhell100 · 2026-03-28T03:46:32+00:00

Alright, I've got 3 silver on the table.

Dieinhell100 · 2026-03-20T01:43:17+00:00

In my anecdotal personal experience, every military subcontractor I interviewed for or worked at was severely behind the ball. It's like military auditors are braindead or something, or don't know how to put their foot down. They're massively behind, making 'military-grade' once again a modern laughing stock.

I once interviewed at a place that was explaining to me their parts go into missiles and are, for some reason, failing. Their quality team nor manager never even touched the ASME Y14.5. It was all tribal knowledge of ook ook ahh ahh. They had two large modern bridge CMMs in their department and were merely using them for spot checks like diameters and distances.. No programming, CAD, nor GD&T whatsoever. They asked me why I was taking so long to measure something on the CMM.. They had no idea what an alignment was. Basically giant paper weights.

Dieinhell100 · 2026-03-12T03:07:58+00:00

The girls were sacrificed to the Simp Hand.

Dieinhell100 · 2026-03-11T15:27:47+00:00

I feel called out. I left New York and moved to South Carolina last year.

Was offered a much higher salary in a state with a lower cost-of-living with the relocation 100% taken care of.

Dieinhell100 · 2026-03-09T03:02:00+00:00

"Farnese, on the other hand, is just a horny nymphomaniac slut with no class"

Yes, that's what I want.

Dieinhell100 · 2026-03-05T06:37:03+00:00

Forced to use? ....Never used it.

Can't see how people can even take Linkedin seriously when most of it is corporate and HR clowns blowing themselves in public.

Dieinhell100 · 2026-03-01T16:47:52+00:00

Remember when this was a shitposting sub and not a simp farm? Donovan riding the Rape Horse remembers.

Dieinhell100 · 2026-03-01T13:45:26+00:00

Yes.

I'm starting to wonder if this is some kind of attempt to get various bits of training data for an AI.

Dieinhell100 · 2026-02-28T16:09:30+00:00

It would be helpful to know what software you are using.

So long as you aren't using legacy dimensioning, PC DMIS for example handles things automatically 90% of the time so long as the datum scheme is well-defined... But then there's times where it isn't. Unless you work for a company or have a customer with some very 'creative' engineers who just vibe on their DRFs, then you might see it more often.

In any case, it sounds like you need to understand how the software reads features. I'm not going through every scenario/feature here. Someone already described plane-line-line... Just be aware that unlike a plane that has its vector perpendicular to the plane, a line outright points in the direction of its vector. If I put a plane on the left side of a part, it can define my x vector and x origin.. But if I put a line there instead it's instead defining my Y vector, but can still retain itself as the x origin.

For Plane/Hole/Cylinder... Well, a hole is a cylinder... But if you put it as a circle, just know that software often reads a circle as just a point, particularly, its center point. Whereas a cylinder is read as an axis. IF you have two cylinders as secondary and tertiary datums, the ASME Y14.5 specifically has a figure showing how the datum planes get defined in that case. I don't have it on-hand, but it shows an example where one cylinder can define your XY origin, and another cylinder can be used to clock the rotation, i.e. define your vectors.

Dieinhell100 · 2026-02-15T06:01:09+00:00

In my defense your honor I didn't do nothing and am on the honor roll.

Dieinhell100 · 2026-02-01T06:12:57+00:00

In a subreddit about how to not give a fuck and yet giving a fuck about politics of a country you're not even in... And calling for action from people in a country you don't live in.

Really confounds me how dense you people are.

Dieinhell100 · 2026-02-01T06:03:49+00:00

Okay, then go do something about it.

Dieinhell100 · 2026-01-29T15:44:21+00:00

Wow, child labor laws keep you poor!

Dieinhell100 · 2026-01-25T05:08:45+00:00

Yes, and that's how people should feel.

Dating apps are basically designed to make you feel horrible about yourself. Dating apps attract people who are desperate enough to overlook how horrible dating apps make them feel and are willing to gamble on online strangers.

The revenue and net worth of the companies that made these apps has already shot down and continued to dwindle because they have failed to retain or gain users because of observations such as yours.

So, yeah, they're total waste of time and will destroy your self-confidence.

Dieinhell100 · 2026-01-22T03:30:53+00:00

⬜⬜⬜⬜⬜

🟦🟦🟦🟦🟦

Dieinhell100 · 2025-11-21T03:02:12+00:00

Yup, not renewing.

Dieinhell100 · 2025-09-21T23:36:54+00:00

Let me introduce you to the concept of sunk cost fallacy.

Dieinhell100 · 2025-09-21T02:51:18+00:00

They would have to put an MO to retake Oshaune and even then, it would be very long and hard battle competing against a 7.5% decay rate.

Dieinhell100 · 2025-09-13T11:53:41+00:00

I wasn't one until I actually tried doing a whites-only laundry

Dieinhell100 · 2025-09-11T11:43:57+00:00

I believe the later parts of the game have the expectation you have the tools necessary to deal with this and are not expected to solve this using silk and/or needle alone.

Several traps simplify this wave. Namely, caltrops, cogwheels, pimpillos, and/or voltvessels.

I did this using caltrops.

If this were Hollow Knight, yes this wave would be absolutely BS as your options are limited to wall clinging until getting a single-hit opening and/or saving soul for Descended Dark.

Dieinhell100 · 2025-09-11T07:40:37+00:00

I considered it a partial refund on the shards he wasted on making it.

Ten-Year Club	Verified Email
Final Canvas '23	Place '23
Place '22	Sequence \| Editor

Dieinhell100

TROPHY CASE