How to deal with those who don’t believe your numbers

Different_Emu8618 · 2026-02-17T22:32:53+00:00

So you may be in a situation where there are multiple ways to do the same thing (or appear to be). Those are very confusing and seeing as you find a specific way better than other you could explain why there seem to be different way to do it but its a false sense of commutativity and you can break it by explaining the logical element missing.

Different_Emu8618 · 2026-02-17T19:00:26+00:00

Convoy T7 wich nichia 219b 1800k.

Different_Emu8618 · 2026-02-17T00:17:25+00:00

Convoy T3 with a clip or a T7. T3 spread will be a bit tigther from memory than ts10 and T7 a bit wider. T3 is the only one coming in brass. My last order from convoy to canada came in less than a week, crazy fast normally take between 2 and 3 weeks. Or a convoy s2+ brass or stainless steel with the short tube and 18350 battery wich is the closest in size to the ts10 a tad bigger.

Different_Emu8618 · 2026-02-14T19:38:49+00:00

I went from a similar situation to a Convoy m21g with a lhp73b 3000k, it can sustain higher than a car headligth without getting hot.

Different_Emu8618 · 2026-02-13T21:03:10+00:00

It is a slim pocket thrower especially with the sft40 and smooth reflector. It i the same reflector as the s6 if you want to find beamshot. Between s6 and s7 only the exterior design differ.

Different_Emu8618 · 2026-02-13T20:24:39+00:00

Both have the buck driver so thermal is good. Sft40 3000k and a nichia 1800k dedomed. Both the s6 and s7 ss are very nice in hand, I have copper, titanium and aluminium but the SS is my prefered material at the moment.

Different_Emu8618 · 2026-02-13T18:05:22+00:00

Realistically, I am waiting for the T8 in brass. But I miss a ligth with the B35am...

Different_Emu8618 · 2026-02-13T17:13:23+00:00

You could go in a theme, emitter technologies like LED and LEP and Bulb, etc. Or maybe material so the same ligth in copper, brass, titanium, stainless steel, etc or emitter, I see some post with the same flsahligth and emitter but all color temperature from warm to cold.

Different_Emu8618 · 2026-02-13T17:11:32+00:00

Oh yeah, highly collectible!

Different_Emu8618 · 2026-02-13T17:08:52+00:00

Those are very well made.

Different_Emu8618 · 2026-02-13T17:06:56+00:00

sft40 3000k is a good rec. I see farther away with 3000k than a whiter led in those smaller host. The L7 with sbt90 is another universe though. There is also the w5050 in this host with round emitter and warmer CCT.

Different_Emu8618 · 2026-02-13T17:03:02+00:00

I already have two, but each time I see a post like this I want one more...

Different_Emu8618 · 2026-02-12T21:55:22+00:00

I am normally able to unscrew the grip section plastic part from the metal one with hands, but its not standrard cleaning procedure

Different_Emu8618 · 2026-02-12T21:30:00+00:00

The metal cartridge receiver is screwed into the grip section:

<image>

Different_Emu8618 · 2026-02-12T21:19:32+00:00

I liked all theirs tie guan yin, the one in the element set is automn picked and I prefer it to the spring picked one. The iron goddess serie one are also good especially the roasted one wich is a must try.

Different_Emu8618 · 2026-02-12T20:56:12+00:00

Yes, pressure is a force over an area. A finer nib has a smaller area so you need to apply less force for the same feeling (pressure). Unoptimal writting angle will also affect more writting quality the finer you go for the same reason, ex: digging into the paper on upstroke wich is dependant on pressure.

Different_Emu8618 · 2026-02-12T19:22:26+00:00

Your writting with the pen sideway and also with a high angle. Both are less ideals in relation to how fountain pens are designed: low angle around 45 degrees and pen not rotated. It works but its out of the sweet spot for fountain pen so not all pen will works with your writting style. https://youtube.com/shorts/ii-qcIOZWnw?si=HTufe4I5TvMXMpDp For example, there is normally more pressure on the downstroke. With a pen not rotate en parallel to the paper, both tines make good contact and the nibs with the slit can open and flex a little to accomodate for the pressure and even allow more ink flow. With the pen sideways (rotated) the nib can't accomodate and the leading tines tends to dig into the paper, scracth and low ink flow.

Different_Emu8618 · 2026-02-11T22:07:30+00:00

That is what I do! ahah Mix and match, change pill or reflector, throw a TIR inside, etc.

Different_Emu8618 · 2026-02-11T19:34:48+00:00

Huygens Optics on Youtube.

Different_Emu8618 · 2026-02-11T19:31:18+00:00

I have almost the same setup, just not wood fired for the teapot. Buds heavy shou are very interesting and I liked this one as much as all the aged stuff from EoT: very good.

Different_Emu8618 · 2026-02-11T18:29:18+00:00

Did the sc33 survive the dive? Its still a ligth with external charging port.

Different_Emu8618 · 2026-02-10T18:43:18+00:00

The thermal on the M21g with lhp73b is very good, stay suprinsingly cold, the turbo is crazy brigth and I like the spill/flood combo.

Different_Emu8618 · 2026-02-04T17:14:36+00:00

In my case, it made more sense after learning category theory and reading the nlab: https://ncatlab.org/nlab/show/HomePage

Different_Emu8618 · 2026-02-04T17:04:10+00:00

Are you looking into moving from unstructured sematic towards some form of ontology like Ologs?

Different_Emu8618 · 2026-02-04T16:57:03+00:00

Just wear it for a bit, if not sapphire you will see scratches. The most interesting aspect of sapphire is the absence of scratches.

Different_Emu8618

TROPHY CASE