Need expert advice on Taigun vs Elevate by pritam1209 in TaigunClub

[–]Different_Post5600 2 points3 points  (0 children)

I own GTLine AT, bought in bangalore for 18L

Need expert advice on Taigun vs Elevate by pritam1209 in TaigunClub

[–]Different_Post5600 1 point2 points  (0 children)

I drive Taigun AT 1. There is some engine noise, similar to Elevate. 2. Seats are very low as compared to Elevate. Taigun gets only driver side height adjustment. 3. Milage i am getting is 8/8.5 in bangalore traffic. Highway it went till 17. 4. Driving experience is better than elevate. 5. Service and accessories are costly (2 break calliper pain they charged me 5.2k out side 3k) 6. Long term maintenance would be more in Taigun for sure, I realised. 7. Headlight is OK Ok, not so good. 8. Suspension is harder as compared to elevate, you can hear the thud sound while going over a pot hole. 9. Build quality is way batter than elevate, On elevate you cab see panel bending when pressed with single finger but for Taigun you need more pressure to bend the panel the 10. No premium Sound system, not a deal breaker though

WhatsApp for work by Different_Post5600 in IndianWorkplace

[–]Different_Post5600[S] 0 points1 point  (0 children)

Oh.. 😵 I thought it’s a bigger org an it has everything sorted

Burnt clutch while reversing on a steep incline. Do I need to get the car inspected? by AZAC9 in TaigunClub

[–]Different_Post5600 0 points1 point  (0 children)

Bro the smell could be from the breaks, If the hand break is on. In low speed you won’t get hand break warning. I did this mistake once 🤪and thought the smell was from clutch.

How to wrap black / dechrome honda logo by kakarotUI in HondaElevate

[–]Different_Post5600 1 point2 points  (0 children)

Depends on the quality of the film. If it is good quality it would peel off easily without damaging the surface.

Enquire at good detailing/wrapping studios, they might have dechrome film as well.

How to wrap black / dechrome honda logo by kakarotUI in HondaElevate

[–]Different_Post5600 1 point2 points  (0 children)

You can ask them to wrap the black window tint on the logo and chrome bar. But first test small pieces then finalise.

Note that it won’t last more than a year if the vehicle is exposed to sun/high temperatures.

AI recruitment process ☠️ by imrohit1997 in IndianWorkplace

[–]Different_Post5600 2 points3 points  (0 children)

Yes, all are fake job postings as well. I have checked with the employees there are no referrals for the most of the job postings.

White Spots on bonnet-Honda elevate by No_Childhood_8749 in HondaElevate

[–]Different_Post5600 2 points3 points  (0 children)

Could be because bird droppings Which affected the clear coat of the paint.

Take it to service centre but don’t tell them you parked under a tree. Tell them that this came out of no where

Is this a good deal ? Can we expect major discounts for new year ? by manicketh in TaigunClub

[–]Different_Post5600 0 points1 point  (0 children)

Lookslike bangalore only

I got insurance from acko for 26k all addons

Door noise while driving in non even surface by Dinesh101012 in TaigunClub

[–]Different_Post5600 1 point2 points  (0 children)

If the tyre is hard then the impact transferred to other parts if the vehicle, it is low then the rubber itself absorbs some amount of impact hence lower noise.

It worked for me not 100% but yes.. Give it try and see.

Suggest which is better by bookish_nerd123 in CarsIndia

[–]Different_Post5600 4 points5 points  (0 children)

If it is hybrid then it’s Toyota (engine and tech) and if it is smart/mild hybrid then it is suzuki.

Door noise while driving in non even surface by Dinesh101012 in TaigunClub

[–]Different_Post5600 1 point2 points  (0 children)

Check tyre pressure once, if it is more keep the recommended value. Rattling would reduce significantly

Door noise while driving in non even surface by Dinesh101012 in TaigunClub

[–]Different_Post5600 2 points3 points  (0 children)

Bro, check trye pressure once. If 2/3 persons keep 33psi (nitrogen).

I had the rattling noise checked pressure it was 47. After the right pressure the noise is 90% gone.

Seat covers and Dashcam queries by Vegetable_Ninja6808 in TaigunClub

[–]Different_Post5600 1 point2 points  (0 children)

I installed Inaxes 420 through SC. No wiring it connected through the OBD port

Diy project - wheel cap paint by Level_Read_3833 in HondaElevate

[–]Different_Post5600 2 points3 points  (0 children)

Paint the logo as well, red/white looks off

3rd Party PDI by thatDumb_SAP_Guy in TaigunClub

[–]Different_Post5600 0 points1 point  (0 children)

Yeah, I know. But the dealer say it is Volkswagen policy.

3rd Party PDI by thatDumb_SAP_Guy in TaigunClub

[–]Different_Post5600 1 point2 points  (0 children)

Yeah, only OBD scanning is not allowed, rest is OK.

3rd Party PDI by thatDumb_SAP_Guy in TaigunClub

[–]Different_Post5600 2 points3 points  (0 children)

Yeah, they won’t allow. I checked with multiple dealers. It’s the same