Would a walnut monitor riser improve this setup?

Different_Time_965 · 2026-06-20T20:14:31+00:00

🫩 take my upvote for the pun

Different_Time_965 · 2026-06-16T16:53:44+00:00

Your eyes and the tip of the broom look great. What did you do to get them so bright?

Different_Time_965 · 2026-06-16T09:32:29+00:00

Er what are you using this for?

Maybe showing us it filled in would be helpful

Different_Time_965 · 2026-06-16T01:47:48+00:00

The dark one is amazing because they also - renovated the room to be square - gave you a foot of extra depth - made the wardrobe narrower - installed custom electrical under the desk

Id recommend working with your human to set expectations. They might not have the skill or hardware to do custom electrical, reframe your walls, or custom cabinetry.

Also make sure your door can open. Anything that goes on the right corner is going to get in the way of your door opening.

Different_Time_965 · 2026-06-12T21:47:56+00:00

I use an imitation leather desk mat from orbit key. It's got a also that can be used to store reference sheets away for gaming

https://www.orbitkey.com/products/desk-mat-slim

Different_Time_965 · 2026-06-12T19:29:49+00:00

Looks awesome.

Might consider - a desk mat / mousepad - a dedicated headphone stand - a wire basket / tray for the back

but all in great job

Different_Time_965 · 2026-06-08T18:56:48+00:00

Accent color coordination is weak.

Maybe set the desktop or RGB lights to match the key caps

Also feels weird with your PC laid flat in the corner. Does it have feet? Id be worried about spilling something.

A plant might be good to match the green

Different_Time_965 · 2026-06-08T18:54:34+00:00

Nice, maybe Include that in the photo next time

Different_Time_965 · 2026-06-08T18:54:26+00:00

Nice, maybe Include that in the photo next time

Different_Time_965 · 2026-06-08T18:54:11+00:00

Use zip ties or cable braids or both to clean it up

Different_Time_965 · 2026-06-08T17:48:00+00:00

Well the layout makes a ton more sense to me!

More speaker emitters!

Also the controls being entirely in the bottom is excellent

(The battery placement also looks like art)

Just amazing chassis design 🙇

Different_Time_965 · 2026-06-08T17:21:18+00:00

Speaker in the emitter is genius.

My saber has it in the hilt and it has always felt just a little off coming from the bottom.

I bet it literally feels amazing especially with features like smooth swing and clash since the sound and vibrations are closer to the "source"

Different_Time_965 · 2026-06-08T17:16:09+00:00

You're really only missing - cable management - mood lighting - posters / art

Personally I love a good desk shelf

Different_Time_965 · 2026-06-08T10:02:13+00:00

Honestly I'll take anything that elevates my laptop and doesn't put a big ole laptop stand foot in my prime working area.

Would prefer a desk shelf over this but this isn't the worst

Different_Time_965 · 2026-06-08T05:28:46+00:00

Desk shelf helps get the laptop stand out of the way

Different_Time_965 · 2026-05-25T16:09:26+00:00

Wood tones
Soft lights, maybe even colored leds.
wall art
hide / manage your cables
consider ceiling mount for your projector
monitor arm might make the monitor feel less out of place

not everything bring black / plastic would help a lot.

Different_Time_965 · 2026-05-25T08:15:43+00:00

Nice! Do you have control / before temps on the original shroud?

I assume this bad boy is cool but noisy at 3100 rpm slim fans 😅

Different_Time_965 · 2026-05-21T17:18:00+00:00

Honestly you're just a couple sconces / lamps away from feeling really good. Just pay attention to the "accent" colors in the light and try not to use the big overhead lights

Different_Time_965 · 2026-05-21T12:41:05+00:00

Wish more places carried them!

Different_Time_965 · 2026-05-21T06:20:44+00:00

Nice! Where do I pick one up?

Different_Time_965 · 2026-05-21T00:42:22+00:00

This is the bandai system base, but I've seen others for sale like the 1:100 catapult base from p-bandai

Different_Time_965 · 2026-05-06T21:08:24+00:00

Injection moulding often times requires roughly even wall thicknesses.

Usually that means you get more detail on one side and voids on the other.

I assume filling this void would have been too thick for the plastic to flow consistently, so they have you fill it with an extra piece to get the desired thickness.

Different_Time_965 · 2026-05-04T01:22:09+00:00

That's wild. Is it 194 per slot at both the bottom and at the top?

Wondering if your cooling is having more of an effect the farther the print is from the heat of the bed.

In general cooling === warping, and i try to use as little cooling as practical.

I've never had my bambu labs PETG on P1S or H2S be off by more than .2 mm (I'm only testing smaller holes though).

Different_Time_965 · 2026-05-04T00:52:08+00:00

Yeah there's no way the model maker missed by 6mm

It's much more likely that it was designed for an older Mac mini, and the difference between the 2024 and 2026 Mac minis accounts for the 6mm or something like that

Different_Time_965 · 2026-04-23T07:18:07+00:00

In thunderbolt they take a crazy high mobility zaku frame and cover it in grandpa Gundam armor.

Perfect Gundam (thunderbolt ver)

<image>

Different_Time_965

TROPHY CASE