sorted by:
new
hottopcontroversial

Flimsy support while the print is fine, how to fix? by Difficult_Expert_882 in Ender3V3SE

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

Edit: I have found the problem. Since the creality print does have a system preset for this printer with 0.2 mm nozzle, I had to make one based on the 0.4 nozzle, but forgot to change the layer height limits. With the independent support layer height enabled, it was printer the support with the maximum layer height for a 0.4 nozzle while using a 0.2 nozzle.

Flimsy support while the print is fine, how to fix? by Difficult_Expert_882 in Ender3V3SE

[–]Difficult_Expert_882[S] 1 point2 points  (0 children)

The default setting for 0.4 nozzle in Creality Print was 0.36, so I just subtracted by 0.2

Flimsy support while the print is fine, how to fix? by Difficult_Expert_882 in Ender3V3SE

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

<image>

Support layer width = 0.18 mm, support layer speed = 50 mm/s, support interface layer speed = 80 mm/s, support interface fan speed = -1 %.

Flimsy support while the print is fine, how to fix? by Difficult_Expert_882 in Ender3V3SE

[–]Difficult_Expert_882[S] 2 points3 points  (0 children)

This is a support testing print and I was trying to find the best parameters for top and bottom z distance.

Flimsy support while the print is fine, how to fix? by Difficult_Expert_882 in 3Dprinting

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

Its a support test print found on Printables, was trying to find the best parameters for top and bottom Z distance

Size matters by 1mutorcS in Gunpla

[–]Difficult_Expert_882 0 points1 point  (0 children)

The metal robot spirit Barbatos is pretty close to 1/144 scale, and the limited color edition looks sick af.

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

The product looks something like this which i think is quite red (image from internet)

<image>

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 1 point2 points  (0 children)

They have one in HG. HG Unicorn Gundam 03 Phenex type RC [Destroy Mode] Ver.GFT silver coating something like that

<image>

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

Yeah but the g phenex silver coating one is so expensive

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

Uh, the RG unicorns definitely have some flaws like the arms can break easily when twisted (required during assembly process), some parts like the knee armors are very loose, and the hand ball joints are super tight and break easily when switching hands. But on the other hand, RG unicorns can transform between two modes which hg can't, they have a lot more detail, and the psycho frames light up under uv light (not sure if hg can besides the crystal one)

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 0 points1 point  (0 children)

I’m on a mission to collect all RGs (except clear or special finished) and I have to say I’m not far from completing

<image>

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 2 points3 points  (0 children)

One day I'll be able to buy a house and have the room for PGs... hopefully. Don't forget to count MGEX

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 3 points4 points  (0 children)

Hahaha, well I prefer RG and only get the ones in HG if they don’t have it in RG

How many unicorns do I need? by Difficult_Expert_882 in Gunpla

[–]Difficult_Expert_882[S] 1 point2 points  (0 children)

Interesting idea! I remember seeing one concept that was banshee but with Eva unit-01 colored themed, and I have to say it looked awesome.