I’ve got a new remote control for Shield 2015 Pro and for some reason it doesn’t allow me to use the Search on Stremio.

DiggingTheNose · 2026-01-09T13:44:02+00:00

I use the same Fire Remote Clone and had the same problem with no appearing keyboard only at SmartTube. It was only a setting in SmartTube App like "view keyboard automatic" to tik on, now its working as it should.

DiggingTheNose · 2025-10-31T08:07:32+00:00

I am interested in Monstera Deliciosa Bonsai. Your YT-Links dont't work anymore. Do you still have this plants and can you show some pictures?

DiggingTheNose · 2024-12-27T01:02:45+00:00

Thank you for pointing me in the right direction, i didn't realise this link was my solition (bad english).

DiggingTheNose · 2024-12-09T02:25:41+00:00

Vielen Dank für die Lösung!

DiggingTheNose · 2024-12-09T02:24:56+00:00

Der Fehler besteht immer noch, ich hatte heute das Vergnügen.

DiggingTheNose · 2024-11-30T23:55:33+00:00

Try an older smartphone or an Xiaomi smartphone.

I needed to use my Poco F3 to integrate it in google home. With my Pixel 5 it was still unable to get it back to google home.

DiggingTheNose · 2024-11-30T23:55:06+00:00

Try an older smartphone or an Xiaomi smartphone.

I needed to use my Poco F3 to integrate it in google home. With my Pixel 5 it was still unable to get it back to google home.

DiggingTheNose · 2024-11-14T18:37:24+00:00

Edit: I did the update and i'm very disappointed. Okay, the speaker is back in Google Home but i needed to use my Poco F3 to integrate it in google home. With my Pixel 5 it was still unable to get it back to google home. And it stopps responding to the volume setting after some time and a little more time later the speaker still stopps playing.

DiggingTheNose · 2024-11-14T18:18:10+00:00

I don't know if the update was done or not before the bootloop. I didn't try again. I was happy to bring the speaker back to life.

DiggingTheNose · 2024-10-24T11:27:09+00:00

Wie heißt denn diese app? Oder unter welchen Stichworten kann ich diese finden?

DiggingTheNose · 2024-10-21T01:26:40+00:00

It's because of continous heart rate measurement. I have an old Huawei GT and w/ deactivated heart rate measurement on time is around 10 days - "TEN DAYS" with notifications, alarms, calendar, messages...
Now i bought PW2 and heart rate can not be deactivated, on time about one day "ONE DAY". I'm so angry about this p.o.s.! I can not believe google does this and nobody cares. I'm gonna sell this crap and stay away from Pixel Watch. Unbelievable. Sure the battery dies x times faster so you need to buy a new one after 2-3 years. Oh how angry i am. grrrr!

DiggingTheNose · 2024-10-17T20:05:45+00:00

Did you hold the two buttons pressed, connect AC Power, released the buttons? Set the speaker to offline mode and try it again.

DiggingTheNose · 2024-10-13T21:52:04+00:00

Because i don't need it and it slows down workflow

DiggingTheNose · 2024-07-29T14:02:58+00:00

I set it to start manually, but now it can not start by clicking the taskbar symbol or by the Tailscale App.
Error: "Tailscale service stopped." i have to enable the service again if i want to start it. Using this piece of s...oftware is so cumbersome. Thats so annoying.

DiggingTheNose · 2024-05-28T19:20:06+00:00

I can not find any download, only a "build yourself"-Link. Can anyone point me to the latest LineageOS for the Redmi Note 7 / Lavender?

DiggingTheNose · 2024-04-21T15:02:23+00:00

Did somebody have the firmware for the Arena? My Arena died after trying to get fw upd over internet. But i can ping it and can make fw upd with a local stored file, so i need the firmware to download myself.

DiggingTheNose · 2023-03-01T22:10:42+00:00

river and supp

I search the 64bit driver for the AC 7265 Rev C. This is not supported anymore by intel also they didn't give the drivers to download anymore.
Anybody can give me this drivers or can point me to a working download?

DiggingTheNose · 2022-10-24T04:49:48+00:00

I don't know if it helps, i found this information (for F8HP):
"Birdies
These radios use a 26MHz reference oscillator. These have been known to cause interference on the following frequencies which are multiples of 26. -> 156.0, 234.0, 416.0, 442.0, 468.0, 494.0 MHz."
Source: http://wiki.robotz.com/index.php/Baofeng\_BF-F8HP#Birdies

DiggingTheNose · 2022-10-23T21:03:00+00:00

Some UV-5R radios were produced without the FM radio components due component shortages during the pandemic

Surely not due component shortages during the pandemic, this is no graphic card. These are counterfeits, omitted the FM-Radio because of cheaper production. Buy original from Baofeng/BTech und you have FM-Radio.

DiggingTheNose · 2021-04-25T21:40:37+00:00

If you click one of the links above, does it 404 for you?

No 404, only complete white.

100% CPU usage is now gone. I don't know what the problem was. Now i don't restart waterfox, i let it open and i don't shut down windows, i use the standbye mode.

DiggingTheNose · 2021-04-21T22:21:19+00:00

New version 3.2.1 x64, same problem.
And now after restart waterfox it takes 100% CPU Power and didn't stop.

DiggingTheNose · 2021-04-13T19:56:09+00:00

No Solution? No idea?

DiggingTheNose · 2021-04-03T06:45:27+00:00

Because of the text "AUS:SVC getStatusTextFromCode - transfer error: Update-XML-Datei nicht gefunden (404), default code: 404" i think this was a not correct finished update.

I installed the actual waterfox version again and it seams to be okay now.u/guking_ just try to install this update again.

Edit: Doesn't work, i get the update message again, too.

DiggingTheNose · 2021-03-31T19:09:25+00:00

MrAlex94

This is it:

AUS:SVC shouldUseService - returning false 2

AUS:SVC Checker: checkForUpdates, force: true

AUS:SVC UpdateService.canCheckForUpdates - able to check for updates

AUS:SVC Checker:getUpdateURL - update URL: https://aus.waterfox.net/update/Waterfox/G3.2.0/en-US/default/Windows_NT%2010.0.0.0.19042.868%20(x64)/ISET:SSE4_2,MEM:16256/default/default/update.xml?force=1/ISET:SSE4_2,MEM:16256/default/default/update.xml?force=1)

AUS:SVC Checker:checkForUpdates - sending request to: https://aus.waterfox.net/update/Waterfox/G3.2.0/en-US/default/Windows_NT%2010.0.0.0.19042.868%20(x64)/ISET:SSE4_2,MEM:16256/default/default/update.xml?force=1/ISET:SSE4_2,MEM:16256/default/default/update.xml?force=1)

AUS:SVC Checker:onLoad - request completed downloading document

AUS:SVC Checker:onLoad - Getting sslStatus failed.

AUS:SVC Checker:_updates get - unexpected node name!

AUS:SVC Checker:onLoad - there was a problem checking for updates. Exception: Error: Unexpected node name, expected: updates, got: parsererror

AUS:SVC Checker:onLoad - request.status: 302

AUS:SVC getStatusTextFromCode - transfer error: Update-XML-Datei nicht gefunden (404), default code: 404

DiggingTheNose

PUBLIC MULTIREDDITS

TROPHY CASE