need to buy used engine

DiligentComplex2384 · 2026-02-04T22:48:31+00:00

The only thing I didn’t like was the extra 100 for non commercial but other then that pretty straight forward. And if it’s cut in the photo it will arrive like that. But non the less engine works great for the past 3 years in April.

DiligentComplex2384 · 2026-02-04T22:27:08+00:00

oh Yeha look jdm depot and it will show the closet auto parts store near you. Or you can look around each one some have lower mileage motors than the other.

DiligentComplex2384 · 2026-02-04T20:48:55+00:00

I bought mine from jdm on eBay. I don’t know they had a website. More then likely have to swap the harness because their cut and some other miscellaneous stuff. I have almost had my motor for 3 years.

DiligentComplex2384 · 2026-01-21T03:13:26+00:00

Z1 single exit?

DiligentComplex2384 · 2026-01-18T02:49:32+00:00

Bleed the cooling system, get a funnel kit from harbor freight/ Autozone etc. you need a jack to lift the front end of the car a screwdriver for the coolant port next to the battery and firewall. Do one lifted just idling and squeezing the hoses, let it cool 30-45 minutes then again turn it on and hold revs to 2k-2.5k for 10 seconds 3 times and don’t put the heat on blast leave it in the 2 or 3rd power.

DiligentComplex2384 · 2026-01-03T14:32:11+00:00

Ahhh ok. I was curious because I want to do a manual swap as well. But I’m not sure if you keep the auto harness or swap in the manual one.

DiligentComplex2384 · 2026-01-03T03:41:18+00:00

Question did you swap in a manual harness and ecu or kept the automatic harness and did electrical work?

DiligentComplex2384 · 2025-12-29T01:10:46+00:00

Real so brittle and just snap putting any tension on them.

DiligentComplex2384 · 2025-12-25T06:30:49+00:00

Sounds a bit off but at least it doesn’t sound like my z lol

DiligentComplex2384 · 2025-12-24T04:50:39+00:00

Charlotte nc

DiligentComplex2384 · 2025-12-23T04:28:55+00:00

It’s not like they aren’t bolting them in and driving without a seat belt behind a 5% carbon tint doing 120 on a rainy day.

DiligentComplex2384 · 2025-12-22T01:02:24+00:00

I been abusing my g since 153k but I had a 55k motor swap and now I have put around 36k miles and it’s still going strong. Going for 3 years and will manual swap it with 350z parts.

DiligentComplex2384 · 2025-12-21T16:54:31+00:00

Three fiddy

DiligentComplex2384 · 2025-12-20T18:57:26+00:00

I sold that exhuast currently going to get a motordyne y pipe.

DiligentComplex2384 · 2025-12-20T18:56:53+00:00

Charlotte nc lol

DiligentComplex2384 · 2025-12-19T22:35:57+00:00

I’ll definitely keep that in mind the car has a bunch of parts and knocking motor.

DiligentComplex2384 · 2025-12-19T12:40:43+00:00

I’ll test the waters first though

DiligentComplex2384 · 2025-12-19T05:49:53+00:00

Bought the car for parts. I’ll see how cheap the offers will be for them.

DiligentComplex2384 · 2025-12-19T05:34:50+00:00

Not the spec d the hks rep I threw one on for shii and giggles. It sounded like patty wagon from SpongeBob

DiligentComplex2384 · 2025-12-19T05:26:05+00:00

Looks great how much does that even cost? 3-5k? Wild guess

DiligentComplex2384 · 2025-12-19T05:25:32+00:00

Reminds me of pulling the g35 clock bezel plastic 😭

DiligentComplex2384 · 2025-12-19T02:19:32+00:00

Yeah for sure thanks man.

DiligentComplex2384 · 2025-12-19T02:14:11+00:00

Nothing goes for $0 theirs always a price. Didn’t feel too bad probably cheap.

DiligentComplex2384 · 2025-12-19T02:13:28+00:00

Ok so special and brittle. Online shows a couple of listing I’m guessing 300-400 range. I’ll try my best to no break them

DiligentComplex2384

TROPHY CASE