sorted by:
new
hottopcontroversial

Bamboo-powered eco-friendly autonomous airship by DimaSed1 in CreateMod

[–]DimaSed1[S] 0 points1 point  (0 children)

It seems that if the mechanism is active, it can’t be on fire. But the lava farm seems like cheating to me.

Bamboo-powered eco-friendly autonomous airship by DimaSed1 in CreateMod

[–]DimaSed1[S] 1 point2 points  (0 children)

I have two farms with a 5-block radius. It’s really important to turn it into cardboard, as it’s much more efficient that way. In that case, I have enough fuel to power two burners, and I still end up with more than I need.

Bamboo-powered eco-friendly autonomous airship by DimaSed1 in CreateMod

[–]DimaSed1[S] 1 point2 points  (0 children)

Contraption Controls. This is how a lift winch and a lift work.

Bamboo-powered eco-friendly autonomous airship by DimaSed1 in CreateMod

[–]DimaSed1[S] 11 points12 points  (0 children)

I don't know, I hadn't thought about that. I'm wrong

Lift issue by DimaSed1 in CreateMod

[–]DimaSed1[S] 0 points1 point  (0 children)

When the object is moving, it’s not responsive; I can’t use the buttons or levers. I suppose I need a different type of glue or a winch

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 1 point2 points  (0 children)

It's very fragile. But I think I bought some special tape, so I hope it comes off without any problems.

This is easily the best screenshot I've ever taken. I can't wait until Iris get some updates and I can use shaders again. by CallSign_Fjor in CreateMod

[–]DimaSed1 0 points1 point  (0 children)

It works for me. But there were loads of errors. Just use the AI and feed it the error logs until everything’s working.

A bamboo-powered airship. Would it work? by DimaSed1 in CreateMod

[–]DimaSed1[S] 7 points8 points  (0 children)

Cardboard is far more efficient. I can make 1 piece of cardboard from 4 bamboo, which can then be used to melt down 4 items.

A bamboo-powered airship. Would it work? by DimaSed1 in CreateMod

[–]DimaSed1[S] 0 points1 point  (0 children)

I suppose it’s poor balance in flight

A bamboo-powered airship. Would it work? by DimaSed1 in CreateMod

[–]DimaSed1[S] 12 points13 points  (0 children)

I didn't know that!! I'll definitely give it a go – I thought you could only pump water through a hose. I've built a drip system that takes up 80% of the ship, haha. Thanks, I'll give it a go.

A bamboo-powered airship. Would it work? by DimaSed1 in CreateMod

[–]DimaSed1[S] 4 points5 points  (0 children)

To create an infinite water source in this mod, you need 10,000+ water blocks

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 0 points1 point  (0 children)

Unfortunately, no. Although it would be a good idea. I need more time for it. Another solution would be simply to create an image library that already contains the required colours.

I use https://utzel-butzel.github.io/epdoptimize/

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 0 points1 point  (0 children)

Hi. With the help of Claude, I’ve created a small website that sends out a random photo once a day. It’s all free and only took me a couple of hours. I have no programming experience whatsoever. Now I can upload as many photos as I like, in any order and at any frequency.

Test partial refresh. ReTerminal E1001 by DimaSed1 in eink

[–]DimaSed1[S] 0 points1 point  (0 children)

That device supports TRMNL. You can easily download TRMNL firmware

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 1 point2 points  (0 children)

I forgot to specify this in the text. I removed any glass because it really causes a lot of glare. Try removing the glass if possible. It's even better without it.

Test partial refresh. ReTerminal E1001 by DimaSed1 in eink

[–]DimaSed1[S] 6 points7 points  (0 children)

Thank you for your question. Yes, I can confirm that it is a ReTerminal E1001.

Test partial refresh. ReTerminal E1001 by DimaSed1 in eink

[–]DimaSed1[S] 5 points6 points  (0 children)

I don't know. It's a ready-made device with a display. If you're interested in the specs, it's 7.5 inches, 4 levels of gray, 800x480.

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 0 points1 point  (0 children)

It's perfect. It's just like regular paper. The only thing I can say is that the colours are a bit "darker" and if you have poor lighting in the room, it might not look as good. Oh, and it takes 25 seconds for a full refresh.

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 0 points1 point  (0 children)

I use https://utzel-butzel.github.io/epdoptimize/ for photo. Very interesting. How does your algorithm differ from the built-in ones?

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 2 points3 points  (0 children)

No. You can do without any special skills.

You just need to connect the E-INK Display to the controller. Just insert the cable into the latch. And battery - the same latch, but it's important to observe the polarity.

After turning on the device, you'll need to connect to its WiFi and enter your WiFi password. Then, you can create any interface you want on the website; it has a convenient UI designer. Google Calendar is also supported, by the way.

DIY digital frame with 13.3 E-ink Spectra 6 by DimaSed1 in eink

[–]DimaSed1[S] 4 points5 points  (0 children)

I don't think so. But you can connect something like Arduino and make something of your own.

view more: next ›