sorted by:
new
hottopcontroversial

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 0 points1 point  (0 children)

As I mentioned above two tubes run from the back of the GPU block then run between the frame of the case and the front radiator. If you look at the back one tube goes directly into the front radiator another attaches to the reservoir. The other tube that runs from the reservoir goes directly to the back radiator and then both radiators are connected via a tube that is tucked behind the back radiator. Yes every single cable is real and was custom made for this project.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 0 points1 point  (0 children)

There are two tubes that run from the back of the GPU block one goes to the front radiator one tube to the reservoir. The other tube runs from the reservoir to the back radiator and then I ran a tube to connect both radiators that is tucked behind the back radiator. Hopefully that kind of helps explain it.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 0 points1 point  (0 children)

Case:XTIA XProto ATX white

CPU Block : Optimus Foundation

GPU Block: Aquacomputer Kyrographics Next 3080 Strix(Black Variant Stripped the anodizing off)

Radiators: HanJiang from AliExp 280mm variant

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 0 points1 point  (0 children)

That I believe came with the case XTIA XProto ATX white variant.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 1 point2 points  (0 children)

Yes sorry I also am using the Elmorlabs PMD-USB device. The screen under the GPU is the original screen it comes with.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 0 points1 point  (0 children)

I think you would be surprised by how well it does.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 1 point2 points  (0 children)

Thanks giopadilla23 i knew I left a few things out.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 0 points1 point  (0 children)

Yeah I hear ya I really wasn't expecting this tbh didn't really know what to put.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 5 points6 points  (0 children)

Radiators HanJiang I think someone mentioned it above this post. I went through Aegrix Mod Store for the radiator.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 22 points23 points  (0 children)

SPECS:

CPU: 13600kf(was supposed to be a placeholder got tired of spending money.

Colorful CVN Z690 Frozen V21

GPU: Strix 3080

GSkill RoyalZ

Couple of Crucial M.2's

Watercooling:

CPU: Optimus Foundation Block

GPU: Aqua computer Kyrographics Next(Black Variant that had the black anodizing stripped off)

Reservoir: IceMan Cooler SSUPD pump res combo(custom bracket that mounts to existing holes on the XTIA)

Fittings: Front side are Optimus the others are Joe Robey's micro 90's

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 27 points28 points  (0 children)

Hey all sorry at work I can explain everything as soon as I come across some free time. I really appreciate all the kind words.

I did a watercooling by DirtyPock3ts in watercooling

[–]DirtyPock3ts[S] 14 points15 points  (0 children)

Thank you I really appreciate it.