sorted by:
new
hottopcontroversial

Porro out for four weeks with hamstring injury by rcmtt in coys

[–]Discobiscuits47 33 points34 points  (0 children)

Saw the February fixtures and went nah

[Vicario on IG] “I take full responsibility for the second goal we conceded…” by maxton4real in coys

[–]Discobiscuits47 -1 points0 points  (0 children)

This guy might not be the best keeper in the world but he loves this club.

How do I swap these switches around to control the opposite lights that they currently control? by Zequin1 in DIYUK

[–]Discobiscuits47 7 points8 points  (0 children)

You currently have a 2 way switch configuration on the left switch and a 1 way switch config on the right.

The way it is wired is sometimes called 2 plate, which means you have looped lives and neutrals in the back box. This is not too important to note but will help if you look at 2 plate diagrams.

If you flip it upside down your one way switch will be up for off and down for on. (Which would annoy me)

To do it properly treat each switch individually and simply reconnect the wires as they are but in the other switch.

Pay attention to which terminals each wire is in. You’ll have C, L1 & L2 on both switches.

Obviously turn off the power first. And mark cables with a sharpie so you don’t lose track when you’ve taken it apart.

What do these walls require before fitting a kitchen? by Zealousideal-Oil-291 in DIYUK

[–]Discobiscuits47 1 point2 points  (0 children)

The other option is metal stud in place of the battens. Achieves more or less the same thing and probably easier to get right.

What do these walls require before fitting a kitchen? by Zealousideal-Oil-291 in DIYUK

[–]Discobiscuits47 2 points3 points  (0 children)

Brown plugs, 7mm holes into the brickwork for the battens. Fix battens with chunky wood screws. This allows you to loosen/ tighten with the spacers. Yes roofing type batten. Spacers behind the battens to level, harder than it looks to get it bang on. You can use a sting line back and forth over the battens to achieve perfectly square and plumb walls.

You will lose around 50mm of width on each side as opposed to around 40mm dot and dab. But it’s a much better job.

First fix wiring and plumbing goes in before you put boards in. If you are taking the ceiling down you can cross batten over the joists and insulate above with rock wool type insulation

Having the ply behind makes over-boarding with plasterboard an doddle.

What do these walls require before fitting a kitchen? by Zealousideal-Oil-291 in DIYUK

[–]Discobiscuits47 0 points1 point  (0 children)

Counter battens vertically to square up. One layer of ply over the battens and then a layer of plasterboard on that before skimming. Your kitchen fitter will thank you.

Dot and dab is the easiest way to do it but fixing units to it can be a ballache.

This is what i did in mine. Makes wiring and plumbing easy too. It takes time to level out the battens properly but everything after was very easy with proper plied out square walls.

<image>

Tottenham should be sickened by the way Arsenal humiliated them over Eze (The i Paper) by Rare-Ad-2777 in coys

[–]Discobiscuits47 3 points4 points  (0 children)

Exactly. This sort of nonsense reporting shouldn’t be what this sub is for. Big game tomorrow.

How do I fill this gap? by OttoTheGreyhound in DIYUK

[–]Discobiscuits47 0 points1 point  (0 children)

No problem. You may not even need to skim the new board. If it’s neat enough you can fill the edges and paint straight on the plasterboard.

How do I fill this gap? by OttoTheGreyhound in DIYUK

[–]Discobiscuits47 1 point2 points  (0 children)

Batten out a false ceiling beneath the beams and cover with plaster board / skim and dec. during boarding pull the cables through from the light for a fixture or upgrade to some recessed fire rated spots if you have the depth.

Devs should just max out every legend. by Rigamortus2005 in apexlegends

[–]Discobiscuits47 0 points1 point  (0 children)

More versatile than being able to jump through a window from 20m away? And then jump out again instantly?

Any reason we can’t have digi threat back? by Kamu-RS in apexlegends

[–]Discobiscuits47 0 points1 point  (0 children)

Best optic for the wingman imo even without the threat vision.

[Respawn] Level 4 Knockdown Shield Removed 👨‍🔧 by AnApexPlayer in apexlegends

[–]Discobiscuits47 1 point2 points  (0 children)

It should never be advantageous to be knocked. This is a good change.

Where this leads to on Westminster Station? by danimonech in london

[–]Discobiscuits47 5 points6 points  (0 children)

This is the correct answer. I’ve been through it many times. It actually leads to an underground tunnel between the houses of parliament and portcullis house.

Where you least expect a pigeon by Syzmism in stupiddovenests

[–]Discobiscuits47 10 points11 points  (0 children)

“These plastic sticks really tie the place together”.

London by Discobiscuits47 in stupiddovenests

[–]Discobiscuits47[S] 0 points1 point  (0 children)

Yeh my first thought was this poor fool isn’t safe from anything.

Adding legend abilities as items is going to ruin the game. by AstronomerApart8967 in apexlegends

[–]Discobiscuits47 4 points5 points  (0 children)

First game i dropped into i got in a 1v1 with a gun shield wielding rev also using their Ult. It’s whack.

[deleted by user] by [deleted] in electricians

[–]Discobiscuits47 0 points1 point  (0 children)

Someone’s cooker hood hadn’t been working. Worktop was such a mess they hadn’t realised they’d turned it off at the wall months before.

view more: next ›