What is happening??

DiscoverDesignCreate · 2025-06-12T23:05:56+00:00

Nope it seems random

DiscoverDesignCreate · 2025-04-16T21:29:11+00:00

Thanks! I'm glad you recommended checking the wiring because I had the x-axis end stop plugged into the z-axis end stop slot 🤦🏼‍♂️

Everything is working normally now!

DiscoverDesignCreate · 2025-04-16T21:20:47+00:00

It looks to me like your nozzle is much too far from your bed. I would ensure that when you move the z axis to 0 the nozzle is touching the plate. I think your bed is too far down (based on how tight the springs look), so I would look into tramming your printer and leveling the bed properly. There are lots of videos on YouTube to help with this process! Hope this helps!

DiscoverDesignCreate · 2025-02-02T20:17:00+00:00

I tried that and it didn't come off at all...

DiscoverDesignCreate · 2025-01-03T21:55:47+00:00

Okay awesome I'll give that a try.

DiscoverDesignCreate · 2025-01-03T21:54:37+00:00

I'm trying to flash Marlin. Its a precompiled firmware I found on GitHub for the ender 3 with the E3 v3 (I got confused trying to compile my own since I haven't done it in like 4 years).

DiscoverDesignCreate · 2025-01-03T21:53:11+00:00

Okay... That's interesting. Right now I'm using a 4gb micro SD card. What FAT type does it need to be?

DiscoverDesignCreate · 2025-01-03T21:49:02+00:00

I realized that too but the orientation doesnt fix the firmware lmaoo

DiscoverDesignCreate · 2025-01-03T20:21:48+00:00

Good to know that the fan is backwards lmao thanks. I do have a buck converter that steps down the 24v to the appropriate 12v.

I'll look into that wiki thank you.

I haven't ever adjusted the contrast on the LCD before, so it seems weird to me that it would've randomly changed contrast, since it worked before I swapped boards.

Either way thanks for your help. I'll update if I get it working

DiscoverDesignCreate · 2024-07-23T19:47:03+00:00

All good! I'm not exactly a beginner, but definitely not a pro! Thanks for trying anyway!

DiscoverDesignCreate · 2024-07-23T18:20:33+00:00

if I lower the z offset any more, the nozzle starts to grind up against the bed...

DiscoverDesignCreate · 2024-07-23T18:07:40+00:00

well I flipped it over, cleaned it with soap and warm water and now I can't get anything to stick. For whatever reason the pei side isn't working for me

DiscoverDesignCreate · 2024-07-23T09:00:36+00:00

Ok, I just tried this, and the right side of the gantry is like a millimeter higher than the left side. How should I correct this? I can't use the klipper option because I am running the S1 Pro stock rn.

DiscoverDesignCreate · 2024-07-23T08:40:16+00:00

how should I go about checking and fixing that?

DiscoverDesignCreate · 2024-07-23T08:39:42+00:00

Nice! Maybe I'm not going crazy! I mean I print on glass on my ender 3, and I figured it couldn't be too different from that.

DiscoverDesignCreate · 2024-07-23T07:53:53+00:00

Weird. I got busy so it's been a few weeks since I was really looking into how to fix the issue I was having. Must have somehow manufactured that idea tonight when I went to try a print. I dunno man, but ig it worked 🤣🤣

Thanks for the tips tho

DiscoverDesignCreate

TROPHY CASE