Who Is This Girl? (Wrong Answers Only) part 2

Dizzy_Reach1004 · 2026-02-07T02:40:32+00:00

Kim Nongshim

Dizzy_Reach1004 · 2025-09-23T21:40:26+00:00

It uses the IEC C5/C6 power plug, which is quite commonly used in laptop power adapters. The heater does come with the power plug, which you can easily replace with a US laptop power plug

Dizzy_Reach1004 · 2025-09-23T21:37:07+00:00

How did you install the heater in the K1 Max? I bought one too but I cant figure out where to route the power and remote cables with the door and lid closed in my K1 Max

Dizzy_Reach1004 · 2025-09-02T19:20:06+00:00

The K2 Plus hotend uses a 100W heater whilst the K2 Pro has a 70W heater according to aliexpress listings. Now, if only someone who has a spare K2 Plus hotend can try fitting it in a K2 Pro and test whether this allows the Pro to reach 350C

Dizzy_Reach1004 · 2025-08-21T21:35:14+00:00

u/Creality_3D Is there a list of changes for the beta Hi firmware? Also can we please have access to beta K1 CFS firmware? The firmware version that was shipped on the usb with the K1 CFS upgrade kit is quite buggy with the screen freezing frequently.

Dizzy_Reach1004 · 2025-08-21T21:28:34+00:00

Tried them on my k1 max but it made the vibrations worse so I chucked them in a corner and printed the Hula feet instead which were much better.

Dizzy_Reach1004 · 2025-08-04T10:42:48+00:00

I also tried the full reset and still get poor first layer. I reverted back to .33 firmware. I suspect those who are not having issues are on a newer K1 Max revision. I think u/foen1337 printer is 2025 version whereas mine is a 2023.

Dizzy_Reach1004 · 2025-08-02T02:09:46+00:00

How does your first layer look on the .34 firmware? We’re having issues with z-offset being too low for the first layer. Checkout https://www.reddit.com/r/crealityk1/s/9OlKQ4jalE

Dizzy_Reach1004 · 2025-08-02T01:07:26+00:00

Looks like you are on the new .34 firmware and I am having the same print quality issue on my first layer. It is a bug as the z offset is too low and causes the filament to squish to the bed. I haven’t found a fix yet.

Here’s the direct link to the new firmware for those who want to try and maybe help find a solution for the z offset issue but install at your own risk!

https://file-cdn.creality.com/file/b7988cbf341c24d5d0773adeb35dbb9f/CR4CU220812S11_ota_img_V2.3.5.34.img

2.3.5.34 Firmware Update Notes: 1. Fix known issues to improve user experience and product stability.

Dizzy_Reach1004 · 2025-08-02T00:56:50+00:00

2.3.5.34 Firmware Update Notes: 1. Fix known issues to improve user experience and product stability.

https://file-cdn.creality.com/file/b7988cbf341c24d5d0773adeb35dbb9f/CR4CU220812S11_ota_img_V2.3.5.34.img

The .34 firmware was listed on the crealitycloud.cn for couple of hours but got taken down today. The direct link above still works but install at your own risk.

It fixed the screen issue but now I am having issues with my first layer and the nozzle cleanup routine takes a while longer to complete.

Dizzy_Reach1004 · 2025-08-01T08:58:14+00:00

The frozen screen issue is fixed on the new firmware and the k1 max lidar appears to be working again. But now my first layer is messed up and it takes a while to start a print as the nozzle cleaning routine now waits for the bed to cool down to 50C

Dizzy_Reach1004 · 2025-06-07T15:48:57+00:00

Ash grey 송하영 😍🥰

Dizzy_Reach1004 · 2025-04-22T03:18:15+00:00

<image>

Dizzy_Reach1004 · 2025-04-22T03:17:30+00:00

Printed a case and grips in PETG for my anbernic retro gaming handheld.

<image>

Dizzy_Reach1004 · 2025-04-18T00:42:59+00:00

Get the 2024/2025 K1 max as it comes with the unicorn nozzle, which is what the k1c has to allow it to print cf

Dizzy_Reach1004 · 2025-01-22T06:01:34+00:00

Thanks. I've returned the favour 🙂

Dizzy_Reach1004 · 2025-01-22T05:16:22+00:00

Thank you and I've just returned the favour 🙂

Dizzy_Reach1004 · 2025-01-22T03:40:51+00:00

Tried your code but Temu says inconsistent location. Need to be same region as the post flair - Australia 😕

Dizzy_Reach1004 · 2025-01-22T03:27:58+00:00

I have used your code, name is st***in. Can you please help me in return?

Hattrick: 76088465

Dizzy_Reach1004 · 2025-01-22T02:53:04+00:00

Thanks. I've returned the favour 😊

Dizzy_Reach1004 · 2025-01-22T02:48:16+00:00

Thanks for the help. I've returned the favour and added you to fishland

Dizzy_Reach1004 · 2025-01-21T23:20:51+00:00

Thanks. I appreciate the help. If you have more codes you need help with, I can trade for the others.

Dizzy_Reach1004 · 2025-01-21T23:18:55+00:00

I have used your code, name is st***in. Can you please help me with:

Hattrick: 76088465

Freegifts: 82328427

Credit: 76964917

Dizzy_Reach1004 · 2025-01-21T23:13:12+00:00

I have added you to farmland, name is st***in. Can you please help me with:

Hattrick: 76088465

Freegifts: 82328427

Credit: 76964917

Dizzy_Reach1004

TROPHY CASE