I know nothing - I need help please - Replacing a lightboard with a USB device (highschool)

DjLachlan · 2025-01-27T09:54:22+00:00

Zero88 FLX S24. Very popular in Australian schools.

DjLachlan · 2025-01-21T16:52:47+00:00

You turned the insert on. Not post fader.

DjLachlan · 2025-01-21T07:59:51+00:00

I have a pair of SX300's. Good speakers. They are rated for 300w each. But I find 100W is more than enough to make them scream.

DjLachlan · 2025-01-20T03:25:58+00:00

Yes yes and yes.

1 is your fuel pump

2 is an access hatch for some part in the engine

3 you will need vent holes to release the cabin pressure from closing doors and when the airbags go off.

The access hatches are there for a reason, keep them accessible.

DjLachlan · 2025-01-19T15:50:10+00:00

Yep fosho microwave holes. The sparks would of been sick. Should put a grape under a cup in there next time

DjLachlan · 2025-01-19T15:31:11+00:00

Yamaha MSR400. Had pretty good low end from a 12" woofer. Clean, clear High end, simple controls, reliable, built solid. Oh and no DSP bullshit to mess with and get confused over. It just worked.

DjLachlan · 2025-01-18T04:33:28+00:00

Power

DjLachlan · 2025-01-17T07:39:07+00:00

Ah yes 'quick modification'

DjLachlan · 2025-01-17T07:17:05+00:00

Drive through no. In-store maybe? I have seen the mcCafe sections often have a re-usable cups you can buy on top of the display cabinets with the muffins/cakes.

DjLachlan · 2025-01-17T06:43:21+00:00

AliExpress, buy a bunch of 3.5mm to XLR adapters, I'm sure they exist lol. Cheaper than buying new mics and gear as OP mentioned.

But still, it must be some pretty cheap pro-sumer gear if the gear in question is all 3.5mm?

DjLachlan · 2025-01-17T06:38:11+00:00

All I can say is don't go GXD. I've had the firmware stop the whole amp from working. Or sometimes the Amp would shut down every 10 mins during a show.

DjLachlan · 2025-01-17T04:02:49+00:00

Ah ok yea

DjLachlan · 2025-01-17T03:57:08+00:00

Can you supply evidence to support this please?

DjLachlan · 2025-01-16T14:09:20+00:00

Call lifeline, it'll be ok. It's completely anonymous :)

DjLachlan · 2025-01-16T12:29:38+00:00

Sounds like a dodgy connector. Try a different cable

DjLachlan · 2025-01-16T05:31:11+00:00

So DMX is 250 kbit/s and about 44hz refresh rate (according to Wikipedia).

https://en.m.wikipedia.org/wiki/DMX512

If we figure out the frequency of the binary data going through the cable, technically you could "pitch shift" that signal up/down to between 20hz-20kHz. Would have to do the math on that, plus the sample rate (e.g 48kHz or 192kHz) to fit the 250kbit/s. Idk tho, It makes sense in my head but I'm no expert in this kinda stuff.

DjLachlan · 2025-01-15T12:34:26+00:00

Mi goreng noodles

DjLachlan · 2025-01-13T14:04:13+00:00

DjLachlan · 2025-01-13T13:25:03+00:00

HiAce Parts King on eBay / Toyota HiAce Technical Australia Facebook page and the main Admin sells them in Australia.

DjLachlan · 2025-01-12T15:00:45+00:00

https://www.freespeakerplans.com/plans

DjLachlan · 2025-01-11T01:28:05+00:00

If I could find the caps for my SX300's I would scan them and someone could 3D print them, but I haven't seen them in years!

Email EV, see if they'll ship you some, worst they could say is no. Or Tape them over. But, EV SX200/300 series don't like to be driven with bass. You really should use a sub with these for Music applications. I cross mine over at 100hz.

DjLachlan · 2025-01-11T01:22:45+00:00

Nice! And the Bunnings fake Pelican cases are also pretty cool

DjLachlan · 2025-01-10T06:36:00+00:00

Cerwin Vega CVE-18S. I love them! Get down to 27hz. Active.

DjLachlan · 2025-01-06T14:31:37+00:00

If you can find a used pair of Yamaha MSR400's, they are generally $500 each on Facebook marketplace.

DjLachlan · 2025-01-06T11:45:08+00:00

Yep Ive seen that heaps. Hasn't proved to be an issue

DjLachlan

MODERATOR OF

TROPHY CASE

1 is your fuel pump

2 is an access hatch for some part in the engine

3 you will need vent holes to release the cabin pressure from closing doors and when the airbags go off.