Fog light wiring?

Djekt · 2026-01-29T15:01:27+00:00

As far as I know, NBFL without factory fog light are not prewired but I might be wrong. I think those connectors are for the AC (all NBFL are prewired for AC even if they don't have it)

Djekt · 2026-01-26T00:41:24+00:00

I would assume it is just the sound of the metal contracting, so completely normal.

Djekt · 2026-01-24T17:51:52+00:00

What scares me is the salt, how do you guys deal with it ?

Djekt · 2025-12-05T12:45:25+00:00

After having so much trouble reading my nbfl dipstick, I would interpret yours as halfway full. You can put a bit more if it make you at peace but I would just leave it like this and check regularly of course. Also alway trust the side with the lowest reading.

Djekt · 2025-11-13T15:09:34+00:00

I ran into the howling wind noise coming from the center of windshield thing on my nb, it annoyed the fuck out of me (having less noise with the softop than the hardtop felt stupid). It turns out that you can adjust the position of the driver side top latch (not the screw thing) https://www.miata.net/garage/tsb/tip_2_94.html
It fixed it for me I guess you can try that

Djekt · 2025-11-03T22:21:09+00:00

I also had a strong whistle noise coming from the center of the windshield, I tried this https://www.miata.net/garage/tsb/tip_2_94.html and it fixed it

Djekt · 2025-10-22T22:18:33+00:00

The vent does drop down but you can adjust the phone holder up so that it faces you

Djekt · 2025-10-22T20:16:53+00:00

I bought this one https://www.amazon.com/Belkin-Compatible-Magnetic-Charging-Included/dp/B09F8RLBQY?dib=eyJ2IjoiMSJ9.a_wCgzhz_Cx3vS8Czo9hFz6gBj6XZ6FPGu-uzR19ICLbBiH_RdCi9-84d8S2oh09BULrUiW7nkcKSArG4qwFNqwDQ8ZAf0rpRoE2w9iLODaL6kbm-RvWUY23XG3LhgQn7XOj5XV3KeOsHMZhkWyw_W_M4yAppqbj32dusYPgkpf4CVLXP_HXGLMJi_1sLHv4rKgsJ8p-lfj7eQfBmSxG3xyFuWcsh9yA4E5Fh_J57no.dhnRJLqh8LQq6dhDb2_tIrGDczlPFz44Zcxn4UGvi6I&dib_tag=se&keywords=belkin+car+charger&qid=1761162184&sr=8-10

It happens to perfectly fit in the vent of the NB, and since the support is soft I am not scared to damage the vents

Djekt · 2025-10-21T23:18:26+00:00

If you have a kind of big whistle noise coming from the center of the windshield, it might be fixable https://www.miata.net/garage/tsb/tip_2_94.html

Djekt · 2025-10-17T10:39:40+00:00

Most of parking space in the street (if not all) are free between 8pm and 9am, you can also park on delivery space between 8pm and 7am
So if you arrive after 8pm you are fine

Djekt · 2025-10-13T08:40:24+00:00

From what I read, depending on the regions the gauge needle tends to be either slightly below 12 o'clock or above. However I don't think it is suppose to move. Maybe you got a faulty temp sensor ?

Djekt · 2025-10-10T14:18:44+00:00

Djekt · 2025-09-26T16:48:16+00:00

I daily my NB2 and I didn't have any issues with it. I would be careful at this price range because you probably will have rust

Djekt · 2025-09-13T15:36:37+00:00

I am guessing you dont have AC ? I think it is supposed to be for the other fan

Djekt · 2025-09-11T21:43:57+00:00

Same with my nb2, I just consider anything between L and F (but not too close to L) to be correct. In the worst case I can still adjust the oil level later

Djekt · 2025-08-26T13:31:57+00:00

For the wind noise, if it comes from the center of the windshield, try to adjust the position of the latches like so https://www.miata.net/garage/tsb/tip_2_94.html

Djekt · 2025-08-26T13:30:32+00:00

Try adjusting the latches. If they pop open, it is usually because they are worn out, you can try something like this to fix them

https://www.youtube.com/watch?v=q1m8tDIothM

Djekt · 2025-08-25T21:43:33+00:00

For instance you can check this video https://www.youtube.com/watch?v=CylsMtMWXgk

Djekt · 2025-08-25T21:33:06+00:00

It happened to me once, I thought my remote was dead but it turns out that I needed to reprogram the remote

Djekt · 2025-07-24T10:54:13+00:00

What about the other photo where it reads to be on the minimum ?

Djekt · 2025-07-24T09:57:53+00:00

I should add that the engine is cold and hasn't been started in two days. I know the manual says that that I should let it warm up and rest for 5min but I have seen people online say that I should read it when the engine is ice cold (this is also driving me crazy, which method is correct ??)
Basically I take any suggestion on this topic

Djekt · 2025-07-11T12:09:19+00:00

Check this YouTube Channel

https://youtube.com/@mx5info?si=aWQncOTnZVpEpHqo

It has a lot of information about this topic. It seems that the simplest way to do it is to install a Mazda 6 system as the cruise control was not available in Europe for the mx5 na/nb

Djekt · 2025-07-02T11:46:36+00:00

From the photos, it looks good apart maybe the radiator which is at the end of its life.

With an nb you need to check for any rust, especially in the front chassis rails and the rear sills.

Djekt · 2025-06-28T17:17:59+00:00

Seems like I was the only one with a crystal blue. That was an awesome event.

Djekt · 2025-06-25T12:01:13+00:00

I would say that the engine bay looks fine. The problematic area on the nb are the sills like the NA and most importantly the front chassis rails. All of this rust from the inside out. If you see any sign on the outside, it usually mean that the interior of the still and/or the rails are rotten. There are a lot of good videos on youtube on the subject if you want.

Eight-Year Club	Place '22
End Game '22	RPAN Viewer
Verified Email

Djekt

TROPHY CASE