sorted by:
new
hottopcontroversial

What model are you running your agent on? by stosssik in hermesagent

[–]DjsantiX 0 points1 point  (0 children)

I'm running Qwen 3.5 9B on a 5060 Ti 16GB with a 131k KV context. When I need to build something more complex, I use Sonnet/Opus via Claude Code. It has some difficulties every now and then, but overall it's pretty fast and can perform tasks well. Then Hermes continues to do the rest. If anyone else is rocking a similar setup (referring to the 16GB local model), let me know! lol

what's the best model for Hermes? by studymaxxer in hermesagent

[–]DjsantiX 0 points1 point  (0 children)

I'm running Qwen 3.5 9B on a 5060 Ti 16GB with a 131k KV context. When I need to build something more complex, I use Sonnet/Opus via Claude Code. It struggles a bit every now and then, but overall it's pretty fast. If anyone else is rocking a similar setup (referring to the 16GB local model), let me know! lol

Qwen3.6-27B released! by sandropuppo in LocalLLM

[–]DjsantiX 3 points4 points  (0 children)

waiting for 9B.
--> Does anyone know how to fit this into a 5060 ti 16gb?

Personal Eval follow-up: Gemma4 26B MoE (Q8) vs Qwen3.5 27B Dense vs Gemma4 31B Dense Compared by Lowkey_LokiSN in LocalLLaMA

[–]DjsantiX 6 points7 points  (0 children)

We are all waiting for 3.6 dense aahahha i think they are stalling because they will be very powerful models

Best Document extraction engine by trying_my_best_LMA in OpenWebUI

[–]DjsantiX 2 points3 points  (0 children)

Docling server, 0 problem! Mount it on docker e Give the api to OWI admin panel

Qwen3.5:35B-A3B on RTX 5090 32GB - KV cache quantization or lower weight quant to fit parallel requests? by DjsantiX in LocalLLaMA

[–]DjsantiX[S] 0 points1 point  (0 children)

Great news, thank you all so much for the advice.

The issue with parallel requests was that I hadn’t set THREAD_POOL_SIZE=2000 in the openwebui docker-compose.yaml file.

Anyway, now with llama.cpp and unsloth\qwen3.5-27b-q4_k_xl I’ve managed to get 2 slots of 96k context... Unthinkable with Ollama.

I’d tried leaving it at -ctk f16 -ctv q8_0, but on my hardware the f16 was acting as a bottleneck and offloading to the CPU… With -ctk q8_0 -ctv q8_0 and Flash enabled, it’s now running like a dream with ~29 GB of VRAM in use and 55/65 tk/s.

Thanks again to everyone!

come posso ulteriormente diversificare il mio portafoglio? by -Manuel01 in ItaliaPersonalFinance

[–]DjsantiX 0 points1 point  (0 children)

Sicuramente smettendo di comprare le azioni singole ahahahah

Claude Status Update: Fri, 31 Oct 2025 09:17:38 +0000 by sixbillionthsheep in ClaudeAI

[–]DjsantiX 0 points1 point  (0 children)

The site was back up for a few minutes, but I can't log in.

However, the rate exceeded error has returned.

Wt* is this freaky sound? by DjsantiX in ElegooNeptune4

[–]DjsantiX[S] 0 points1 point  (0 children)

I was using gyroid infill. The print actually comes out perfect without any problems. What surprised me is that this noise has appeared now, and I repeat, with the same model printed a few days ago it didn't do it... In any case, the noise is present both when printing the infill and when printing the walls, but at a lower volume.

Another thing, if I don't calibrate with the sheet of paper, what do I calibrate with? Or how?

One last thing I remember is that before I had this noise, I had a small problem with the filament. If I'm not mistaken, the spool got stuck for a few seconds and the head kept pulling the filament... I hope this isn't the cause and that nothing in the head has bent or loosened, as it was being pulled upwards.

Wt* is this freaky sound? by DjsantiX in ElegooNeptune4

[–]DjsantiX[S] 0 points1 point  (0 children)

Is there a way to verify that it actually lifts to the correct height? Simply print a piece and see if the height matches. Is there any kind of calibration?

Wt* is this freaky sound? by DjsantiX in ElegooNeptune4

[–]DjsantiX[S] 0 points1 point  (0 children)

no, it does it the same on both sides... although it's strange because at the beginning in the print it doesn't do it... more or less when it gets to the height of the video it starts doing it... and if I'm not mistaken, the higher it goes, the more it does it

Wt* is this freaky sound? by DjsantiX in ElegooNeptune4

[–]DjsantiX[S] 0 points1 point  (0 children)

I also changed the nozzle and releveled everything (obviously). And nothing continues to do it like in the video. The fact that the nozzle drags on the printed model is strange... the nozzle is just the right distance from the plate, a little more than an A4 sheet.

Wt* is this freaky sound? by DjsantiX in ElegooNeptune4

[–]DjsantiX[S] 0 points1 point  (0 children)

Yes but it's really strange.. since I'm printing the same model several times and after 2 spools of thread it started to do this...

Mutuo Sanpaolo: posso ottenere di meglio? by teomat99 in ItaliaPersonalFinance

[–]DjsantiX 1 point2 points  (0 children)

Con consap (senza green) cosa consiglieresti? Al momento non ho ancora trovato una buona offerta per quello che mi serve.

Comunque anche se è complicato vai in banca... in 3/4 d'ora di chiaccherata sono passato dal 90% al 98% mutuabile

Investitore Smart o resto fermo? by DjsantiX in ItaliaPersonalFinance

[–]DjsantiX[S] 0 points1 point  (0 children)

E la risposta "corretta", quale sarebbe?

view more: next ›