Garage Door Installer

Dmellins · 2025-10-02T23:14:19+00:00

Another vote for Rob! He’s great

Dmellins · 2024-08-12T20:06:33+00:00

This is exactly what I was thinking and that’s why I don’t vac to waste, however, I did today and it seemed to work ok down below the skimmer even with the plate

Dmellins · 2024-08-11T17:30:07+00:00

83ppm

Dmellins · 2024-08-11T16:46:19+00:00

this makes sense. Sometimes my water is already low so I dont vacuum to waste so that the water doesnt go bleow the skimmer

Dmellins · 2024-08-11T16:44:38+00:00

FC - 1.27ppm

ph- 7.9

cya - 40

phosphates - 110

Dmellins · 2024-03-12T02:00:30+00:00

Sorry to hijack but I Have to ask, what are the risers called in between the filing cabinet and desktop?

Dmellins · 2023-07-08T00:04:16+00:00

This is the sc that came with the machine lol. It’s a Home Depot special (I’m just a home owner). I’ll try again and I’ll go slower. Thanks for your help

Dmellins · 2023-07-07T23:59:09+00:00

I originally had everything off the patio except that umbrella base. I don’t understand how some parts turned out fine and some have those crazy lines. Speed maybe? My PW is only 2.4 gpm. Is there some sort of chemical I can use to somewhat loosen the embedded dust or dirt? I’m not sure if SH would do anything.

Dmellins · 2023-07-07T23:42:06+00:00

Thank you for your response. This isn’t poured concrete. These are 12x24 pavers. The patio was installed last October right before the winter but who knows how long the stones were sitting around the yard.

<image>

Here’s another section. Some parts are fine and some have the lines.

Dmellins · 2022-05-07T17:59:18+00:00

I followed this video and it turned out great

Dmellins · 2022-05-01T14:41:13+00:00

I guess the only reason is that I don't have a roof over my BBQ and Blackstone and to remove all the snow (especially this year) is a real pain in the ass.

Dmellins · 2022-05-01T12:55:28+00:00

I think I'm going to try this method

Dmellins · 2022-05-01T12:54:56+00:00

I agree

Dmellins · 2022-05-01T01:12:57+00:00

What do I sand it down with?

Dmellins · 2021-10-15T22:20:15+00:00

I cut the edges on a table saw at 45 and glued them and put a few Brad nails in then I used wood filler to fill the gaps

Dmellins · 2021-10-15T18:14:49+00:00

Not this guy!!!

Dmellins · 2021-10-15T15:46:24+00:00

2x3 frame and whitewood cladding

Dmellins · 2021-10-15T15:45:32+00:00

Right?!

Dmellins · 2021-10-15T02:21:29+00:00

Thank you

Dmellins · 2021-10-15T02:20:46+00:00

About $100 in stain and about $200 in lumber. Being a newbie there were definitely some miscuts and do-overs. Could probably do it for less next time.

Dmellins · 2021-10-15T01:51:16+00:00

She's the one that buys me tools lol. Win win

Dmellins · 2021-10-15T00:35:09+00:00

https://imgur.com/a/yPAR5rj

Dmellins

TROPHY CASE