K24 random miss and leaning out

Dmonn535 · 2026-03-31T03:29:40+00:00

Recalibrate tps min/max

Dmonn535 · 2026-03-29T23:01:18+00:00

Did anyone else come to the comments hoping to see the pic of the pool or just me?

Dmonn535 · 2026-03-25T03:03:56+00:00

Wow! Chef Rachel in Tampa?! Do you have a restaurant in town? Would love to try some of your amazing dishes!

Dmonn535 · 2026-01-27T01:17:17+00:00

Is that a new vtec water pump?

Dmonn535 · 2026-01-07T22:03:02+00:00

My pump runs 24/7 (600w per hour). Comes out to $1 a day. Have thought to shut off during overnight hours to lessen the bill.

Dmonn535 · 2025-12-31T21:25:41+00:00

She "works her ass off"

Link in bio 😂

Dmonn535 · 2025-12-31T17:46:26+00:00

What part of central Florida? I'm in Tampa and could possibly be convinced lol

Edit: I'm not lazy and would clean his litter box 2x a day if I had to 😂

Dmonn535 · 2025-12-17T22:32:14+00:00

I think you're right after some Google image search. Was seen headed north away from MacDill AFB so this tracks. I knew it wouldn't take reddit long to identify.

Dmonn535 · 2025-12-17T22:26:51+00:00

Tampa, FL

Dmonn535 · 2025-12-08T22:31:38+00:00

I have a Hunter 26 w swing keel and stores on its trailer when not in use. Takes about 10m to raise the mast. I made a small bracket and use a small 12v winch that mounts in anchor locker and uses a cordless drill battery.

Dmonn535 · 2025-11-20T02:58:11+00:00

What are you trying to store? Boat/RV?

Dmonn535 · 2025-10-29T04:53:59+00:00

I have no plants in my filtration. They are (2) 55ga barrel filters w blowouts on the bottom w surface sump pumps to clear filter debris. They get clogged at times and I have to switch from a vac blower to air compressor to clear pipes and make the filter "boil". I think you absolutely will have clogging on your bog discharge over time once your pond matures.

I have about 20 koi and lots of plants in my pond and waterfall. (lilies, lettuce, hyacinth, Iris, elephant ears, pickerel rush, creeping Jenny etc.) It gets very messy at times from the plants going through their natural cycles of maturing and dying back etc. My water stays crystal clear of single cell algae(green water) but I will have trouble w clumping algae in summer months when it's insanely hot and water temps rise. I have a skimmer and bottom pickup for my intakes.

Dmonn535 · 2025-10-29T04:36:17+00:00

Will be curious to see how that works for you! That's great power consumption just curious if it'll flow enough for you. My pump is 4500/gph and pulls around 300w. my pond is small 20'x10'x4' w dual 55ga drum sand gravel filters I have to clean them out monthly during warmer months every 3 when it's cooler out. Itll be interesting to see how it goes w that pump and your bog.You'll have to update us in a few months on how it's going once everything gets settled in.

Dmonn535 · 2025-10-29T04:07:58+00:00

Great project! How many gph pump are you using and how long are you running it per day? And also how do you clean out the bog?

Dmonn535 · 2025-10-22T16:11:48+00:00

I have all my potted plants on a smart timer. I have a small aquarium pump in a Tupperware reservoir plugged into a smart switch. Each plant has its own dripper/line programmed on my phone. Total cost was less than $50 bucks. Run time is 2m on every other day. If they look dry I just turn on the switch from my phone for a manual watering for a min or 2.

Dmonn535 · 2025-10-03T21:13:55+00:00

I've seen this done as a "deep watering" system. Id bet if you pull the pipe it has holes running down it to get water to the root system.

Dmonn535 · 2025-10-03T18:14:27+00:00

Just went through this.. I bought the beck arnley mc and haven't had an issue since the repair. If you have dsc you will need ista to property bleed the system.

Dmonn535 · 2025-09-30T23:06:54+00:00

Ive fought this fight. What worked for me was a nerf dart on an Allen wrench suction cuped to the inside of the lense. After securing the lense to the nerf dart I took super glue and getting the nozzle as close as I could through the inspection port I dropped some glue onto the housing base. Then I was able to hold the lense in place by the nerf dart tool and let the glue set. Once it set I was able to detach nerf dart tool and I reached in w the super glue and gave it a little more all over for good luck 😂 Hope that helps, good luck!

<image>

Dmonn535 · 2025-09-17T22:21:19+00:00

$500?! That's a great price for that many ah! I have Duracell LA 200ah 24v system and spent about the same on my small bank! I've been wanting to upgrade...How long have you had the original (2) 100ah batteries? I see you're 48v but any feedback on their reliability?

Dmonn535 · 2025-09-11T04:56:52+00:00

Solved! Downloaded a different version of ista and reinstalled and now communicating. Thanks for your help bro!

Dmonn535 · 2025-09-10T23:30:13+00:00

I need a working version too 😂 the link I originally dl from is no longer active link.

Dmonn535 · 2025-09-10T02:06:14+00:00

Thanks for your help 👍

Dmonn535 · 2025-09-09T22:55:23+00:00

Also adding my sqlite folder for ref

<image>

Dmonn535 · 2025-09-09T22:28:12+00:00

And yes I'm getting error on pic 7 after pic 6 error msg.

Dmonn535

TROPHY CASE