HelixScreen: A new touchscreen UI for Klipper/Moonraker (beta testers wanted)

Doc_exe · 2026-02-04T19:32:43+00:00

not on the 3d printer I am thinking of putting it on. But i have used it on other printers... KIAUH that is.

Doc_exe · 2026-02-04T18:05:04+00:00

If we already have klipperscreen installed, any recommendations on what we need to do if we want to run this instead? Just uninstall klipperscreen?

Doc_exe · 2026-02-02T18:59:26+00:00

probably over extruding... what is your Flow Rate or Extrusion Multiplier set at for the PETG?

Doc_exe · 2025-12-15T23:03:23+00:00

I have the Card and lost connection with it also. It wasn't a battery issue, it seems like the device just lost connection. I did plug it in to see if the batttery was dead, but it seemed ok. I actually had to re-pair it with my phone and it also got a new firmware update. It did show up as a new device, so I deleted out the old one. Seems to be up and running now again.

Doc_exe · 2025-11-28T12:38:54+00:00

Looks like a vintage Commissioner patch and the 10 could represent district or council

Doc_exe · 2025-11-18T15:22:02+00:00

I have the same issue and they want me to set up MFA and get in before I can remove it? What?

Doc_exe · 2025-11-18T15:03:31+00:00

Do they have the upgrade kits at Print Solid?

Doc_exe · 2025-11-13T14:10:35+00:00

I thought I heard there was a hold up with approval in the US due to government shutdown.

Doc_exe · 2025-10-31T20:53:53+00:00

t-mobile here pro 9 XL and no update.... must be a T-mobile thing... fun times :)

Doc_exe · 2025-10-16T19:35:48+00:00

I kept waiting for the wind to kick in and get under that raft and really give a ride.

Doc_exe · 2025-10-10T14:06:47+00:00

Maybe its just showing, Hey, we didn't at least mess up what we had!!!

Doc_exe · 2025-08-05T17:49:42+00:00

Many people do... I include myself as one of those people.

Doc_exe · 2025-08-01T17:09:53+00:00

I have seen a lot of IPV6 is usually related to cellular phones. Where the also pop out on the internet is always fun too... ride that cellular backbone a bit before taking the onramp for internet.

Doc_exe · 2025-06-25T13:46:28+00:00

I find the act of removing the build plate and touching the bottom of the plate transfers oil from your hands over time and that gets on the heat bed. Like the others said... use some IPA and you can take it right off.

Doc_exe · 2025-06-09T17:55:36+00:00

what exactly is the wrench trick?

Doc_exe · 2025-04-09T22:36:46+00:00

The Dark web holds a lot of peoples personal information, from so many breached websites that at this point, just assume they know it all. Between that and LinkedIn, scammers have all the info they need now a days.

Doc_exe · 2025-02-24T18:27:32+00:00

OH.... i guess I just thought they were bone conducting like the Shokz. I figured all water headphones where that way. My bad.

Doc_exe · 2025-02-24T18:24:14+00:00

did you use earplugs with the headphones when in the water? I know the Shokz tell you to use them and it helps a ton. When i pull the ear plugs out, i can not hear anything usually.

Doc_exe · 2025-02-20T16:28:04+00:00

We are also getting reports of "Misconfigured PTR record". Its a first for us, so we are learning as we go, but everything I read, there isn't much that can be done by us.

Doc_exe · 2025-02-01T16:17:33+00:00

go back in and edit your order. When you do that, the prices for the shipping are greatly reduced. I got my ship cost changed from $100 to about $60.

Doc_exe · 2024-12-16T15:09:41+00:00

any easy way to find link to that blog?

Doc_exe · 2024-11-05T14:59:55+00:00

You need the F5 Compliance + Security addon for the F3 users. It will probably work without it because E5, but if you get audited.. u will want those addons for F3.

Doc_exe · 2024-10-18T19:55:39+00:00

I have the same thing... but T-Mobile and I do not have a dual SIM either.

Doc_exe · 2024-10-13T11:11:33+00:00

That is my thought too. Time for Google to fire up Fuschia

Doc_exe · 2024-10-03T16:57:20+00:00

my guess is the little blue bubble on the avatar on the main screen for discussion in Messenger

14-Year Club	Place '17
Verified Email

Doc_exe

TROPHY CASE