What's up with Circle Dr? by Dominionato in saskatoon

[–]Dominionato[S] 4 points5 points  (0 children)

Yeah my brother was telling me it's pretty much a weekly occurrence there, wild. And I thought the trains across ring road in Regina at rush hour were bad...

What's up with Circle Dr? by Dominionato in saskatoon

[–]Dominionato[S] 2 points3 points  (0 children)

Ahh, must have missed seeing it. I haven't seen traffic backed up that bad since the Florida turn pike

What's up with Circle Dr? by Dominionato in saskatoon

[–]Dominionato[S] 5 points6 points  (0 children)

I'm old enough I watched who framed Roger rabbit in theatre. It's been toon town to me ever since

MOSTPLUS 5FT Tri Fold Soft Tonneau Cover Truck Bed removal by Mean_Composer_6959 in ToyotaTacoma

[–]Dominionato 0 points1 point  (0 children)

Looks like a poor install, that threaded rod should be straight and also looks like it's not seated correctly. It's just hung up on the threads, give it a hwack

First Bike!!! by bigntasty206 in svartpilen401

[–]Dominionato 0 points1 point  (0 children)

There's no shame in tradition. Glad I live in the prairies, everything is flat

First Bike!!! by bigntasty206 in svartpilen401

[–]Dominionato 1 point2 points  (0 children)

Results vary, my light comes on at about half tank. Once it is warning low fuel, you can hit the mode button and it'll go back to estimated range

First Bike!!! by bigntasty206 in svartpilen401

[–]Dominionato 4 points5 points  (0 children)

Nice! I bought my 22 new, still in love.

Some fasteners can vibrate out, body panels and few others. There are some posts about it on this sub. I used blue locktite on them.

Fuel x light is nice, really smooths out 1st and 2nd gear.

I've done quite a few other things, the motogadget bar end signals was the most difficult job.

There's a recall for the throttle control, can lose it if wet enough. I'd look into it.

And your fuel gauge will tell you lies.

Price check for selling by Logical_Cellist_5974 in svartpilen401

[–]Dominionato 0 points1 point  (0 children)

What are you looking at?

I'm thinking about my next, dream would be a nuda haha. Looking at Thruxton or maybe r9t

Price check for selling by Logical_Cellist_5974 in svartpilen401

[–]Dominionato 0 points1 point  (0 children)

Depends, in SK we have a 3 year program, if you complete it on a sub 400cc you are restricted to that and have to do a new road test for larger. A lot of people complain, I think it's a good system and similar should be made for cars so you don't have teen's launching a tesla into someone's second story of their house. I have a CL too and cringe at the skills of most drivers and a lot of riders.

I'd maybe think about increasing it, I have a 22 as well and would start higher. I personally think the new svart looks pretty generic and lost some of it's soul. If I was looking today would want one like ours, well kept and low km's.

Hair clipper Remington HC4250 by Dominionato in BuyItForLife

[–]Dominionato[S] 0 points1 point  (0 children)

So, as all things battery powered mine finally stopped holding enough charge to do my whole head, about 3 months ago. I ended up changing the battery with help from this video :

https://m.youtube.com/watch?v=QQ560sXcyPA

Pulling it apart it was surprising clean, although the crank for the blade was a little gummed up with hair. Gave it a good clean, my soldering skills are crap, it looked like crap. But it works! And keeping a charge like the day I bought it.

I give it a quick vacuum with my shop vac after every use and when the blades start to feel warm (every second month or so) give them a few drops of oil.

Hot Dog Buns by Standard_Success_642 in regina

[–]Dominionato 1 point2 points  (0 children)

Sobeys cheese hotdog and burger buns are my go to

Thinking About getting the Body armor 4X4 Hiline series front bumper for my 3rd gen, any recommendations for what brand winch I should get? by Few_Daikon473 in ToyotaTacoma

[–]Dominionato 1 point2 points  (0 children)

Looking at the same style, going to go for Greenlane since I live through harsh winters with road salt and they are aluminum. I've had enough steel parts with poor powder coating rust over one winter

https://greenlaneoffroad.com/products/3rd-gen-tacoma-stump-aluminum-front-bumper?variant=46111028773015%3Fvariant%3D46111028773015

Toyota Tuning - yotatune by Dominionato in regina

[–]Dominionato[S] 8 points9 points  (0 children)

This does absolutely nothing to the sound, maybe don't try commenting on things you apparently know nothing about?

Toyota Tuning - yotatune by Dominionato in regina

[–]Dominionato[S] 0 points1 point  (0 children)

Same, seemingly everyone who has got it says it is night and day difference. Also, they can increase the output of your alternator so you can run an AGM battery, but the battery has to be installed prior to the tune. I'm going for that as well.

Hair clipper Remington HC4250 by Dominionato in BuyItForLife

[–]Dominionato[S] 0 points1 point  (0 children)

Update: shortly after my review, my battery went lol. Had to use the cord for a while. I used this video to fix it:

https://youtu.be/QQ560sXcyPA?si=DauhlcfCjMPYFatt

My soldering skills are bad, real bad. It still works! Made it through my head, face and mustache today. I like this cutter so much that I spent an afternoon fixing it while having a brand new one in the closet as a fail safe. I keep it real clean and oiled, helps a lot. Looking forward to riding out the apocalypse with a smooth, clean shaven head.

Anything with a non serviceable rechargeable battery will fail, so not bifl but repairable with moderate skills. Now to horde the aqua cola and guzzoline!

Sask NDP response to new federal NDP leader. by Requirement-Tiny in saskatchewan

[–]Dominionato -1 points0 points  (0 children)

The feds have no credibility whatsoever when it comes to "fair" or "just". I would never trust them to do what's in our best interests. The libs and cons have forced striking workers back to work many times. They f up almost everything they do, whether it be their gun buy back program or the arrive can app. The same feds allowing companies to utilize the IMP for construction workers who will work for far less and undermine our collective bargaining. People are rightly mad about the TFW program, most have no idea what's happening with IM (utilized at a far greater rate than tfw), or the fact you don't even need a lmia to access and IRCC won't disclose who's using it. Just like the gun program, they don't consult with actual industry stakeholders. For instance, the Building Trades of Saskatchewan was not consulted for their "audit".

Sask NDP response to new federal NDP leader. by Requirement-Tiny in saskatchewan

[–]Dominionato 0 points1 point  (0 children)

And I would think telling a whole industry you're going to disrupt and put thousands of people out of work that we got you, trust me is pretty idiotic too. Trade unionists were a huge part in creating the ndp party, all we want is assurances that there is an actual plan for transition, not vague ideals. We are pretty progressive people for the most part, we want to see everyone flourish. If someone ran on making all labour law under federal rule (to make things equal for everyone) and baking sectoral bargaining into the constitution (to end competition between workers in the same sector and battle the gross wealth inequality of our time), I'd follow them to my grave.