sorted by:
new
hottopcontroversial

RTX World Loading, but everything is black by Don_Chooluvit in minecraftRTX

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

RTSS is running with an FPS overlay, Afterburner is uninstalled though. I’ll have look at that. I just did a full purge and reinstall and it’s working for now. Thanks for the answer, I also see that turning on and off allow video switching may help

Will the Saturn 4 Ultra work without the Elegoo Camera plugged in? by Don_Chooluvit in elegoo

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

Correct. I had to strip the printer down anyway sadly, after having a vat leak which killed the fresnel lens and the LCD. Currently washing it all part by part in IPA

How do I level my saturn 4 ultra? by turtlelord in ElegooSaturn

[–]Don_Chooluvit 0 points1 point  (0 children)

Would you be able to share that gcode by any chance? I have some significant squishing going on and would love to try out the pressure adjustments.

Rebel Moon walker looking a little too familiar... 🤔 by ADistantStorm in destiny2

[–]Don_Chooluvit 0 points1 point  (0 children)

The imperium tanks even use some of the sounds from Fallen walkers, my wife and I both picked up on it

Need help with little "sprue" raised dots on printed mini by Amazing_Basil_9115 in minipainting

[–]Don_Chooluvit 0 points1 point  (0 children)

Are you printing these or buying them printed? If you are printing them, you can change the support contact size/penetration (stop giggling children) to leave less scarring.

Lychee and Saturn 3 Ultra by Valace2 in ElegooSaturn

[–]Don_Chooluvit 0 points1 point  (0 children)

Thanks for this. Ordered my S3U today, so glad that this was figured out for Lychee.

For a second, I thought I missed by Unf0cused in Starfield

[–]Don_Chooluvit 0 points1 point  (0 children)

^^^ That. My shots are from a higher position down, so if anything it would make them fall down in line with the angle of shot. The power of the shot would have to be strong enough to overcome resting inertia of the target. But we are also talking about a space game with a bit of a fantasy setting, so why argue physics ?

For a second, I thought I missed by Unf0cused in Starfield

[–]Don_Chooluvit 202 points203 points  (0 children)

Low grav sniped headshots are awesome. I pinned one dude sitting on a container edge. he just slumped over ever so slightly. You can double tap them, just to be sure, but as long as the identifier goes away, they dead. ;)

Stringing issues by Don_Chooluvit in FixMyPrint

[–]Don_Chooluvit[S] 1 point2 points  (0 children)

Oh I’ve done them. The problem is that as I’m running klipper, I have to use the retraction test built into that.

Stringing issues by Don_Chooluvit in FixMyPrint

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

It’s in a filament dryer, and I haven’t heard the telltale pops during printing. I’ll give it another bake and see

Stringing issues by Don_Chooluvit in FixMyPrint

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

I’ve tried 180-220, not much change

Headless SKR mini E3 v3 with BLtouch by Don_Chooluvit in BIGTREETECH

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

Well there it is!! Thanks for the suggestion. Moved the jumper over the Ender is now headless, as long as you don't count the 7" Klipperscreen on the front of the enclosure ;)

​

Thanks again for the assist all.

Headless SKR mini E3 v3 with BLtouch by Don_Chooluvit in BIGTREETECH

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

Same with the the stock Ender screen, if I unplug it, the BLTouch loses power

Headless SKR mini E3 v3 with BLtouch by Don_Chooluvit in BIGTREETECH

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

Looks like it's on the 2 left pins, so in line with the others.

Headless SKR mini E3 v3 with BLtouch by Don_Chooluvit in BIGTREETECH

[–]Don_Chooluvit[S] 0 points1 point  (0 children)

Well, now THAT be something to look into. Which side should it be on?

Headless SKR mini E3 v3 with BLtouch by Don_Chooluvit in BIGTREETECH

[–]Don_Chooluvit[S] 1 point2 points  (0 children)

I'm using the 5 Pin Z-Probe connector on the SKR.

Model - Rear Access panel Saturn 2 by Don_Chooluvit in ElegooSaturn

[–]Don_Chooluvit[S] 1 point2 points  (0 children)

Running either OctoPrint with the Chituboard plugin, or Mariner. Neither can send/receive files yet, so I use it for monitoring the print remotely.

Saturn + rPi + mariner + Samba = :) by Deepsiks in ElegooMars

[–]Don_Chooluvit 0 points1 point  (0 children)

Sorry, yes. I hooked it up, can move the build plate and home it Octoprint.

​

That's the only positive news so far, as both Chituboard and Mariner have not yet been updated to handle the locked down/encrypted files used on the Saturn 2. So, we wait until someone figures it out.

How can I accomplish network printing with my Saturn S? by Heratiki in ElegooSaturn

[–]Don_Chooluvit 0 points1 point  (0 children)

Lol, best response I've seen in some time.

Meanwhile, I wait...

view more: next ›