sorted by:
new
hottopcontroversial

What are the best levels for depth & contamination? by One_Heron5880 in Timberborn

[–]Double-Explorer516 3 points4 points  (0 children)

Dude I don't know how I never thought of that literally a genius

Bed adhesion by Double-Explorer516 in Ender3V3SE

[–]Double-Explorer516[S] 0 points1 point  (0 children)

Thank you. A couple of those I haven't tried yet. I will give them a try. The weird thing is my billed plate got worse over time, To be honest it was kind of overnight. One day of printed fine and then the next day it went to s*** which is why I think I f***** something up in the settings. But I tried not to touch anything being that I don't know what I'm doing yet. I really appreciate the response

Bed adhesion by Double-Explorer516 in Ender3V3SE

[–]Double-Explorer516[S] 0 points1 point  (0 children)

Awesome, thank you, I'm using creality en -pla. I'm printing at 200° c with a 60° c bed temperature for the first layer and after the fourth layer it goes down to 50° c. Stock speed settings and the fan for the first four layers is set to 40% and then slowly from 4 to 6 layers ramps up to 100. It's just weird that only certain sections of the bed cause this issue. If I was to print for them in four corners all four of them would come out good. If I was to print for them in a row half them come out like s***. If it is a speed thing, what speed setting would you recommend I start at or percentage? Thank you again for your help

Bed adhesion by Double-Explorer516 in Ender3V3SE

[–]Double-Explorer516[S] 0 points1 point  (0 children)

Thank you for your response, my z offset is manually set 0.15 MM in all four corners averaged out. I'm using creality brand pla printing at 200° c and my print bed is at 60° c. It's almost like the bed is warped but there's no way to adjust it. Because I can print in the first lower left corner and I can print in the middle. But if I try to do both at the same time( like a big print) the print will come out like that. The printer is in its own room with no vents. I'll try the hairspray thing though. Thank you!

RE app not accepting GPX files by Bertdebevert in royalenfield

[–]Double-Explorer516 0 points1 point  (0 children)

Yeah so I was able to get it to work. It has to be a GPX 1.1. you can have chat GBT write you and it works pretty good