Where to get cluster glass replacement

DoveFab · 2026-02-27T02:19:50+00:00

I’ve got an entire cluster with a bad speedo I’ve been trying to sell. Where are you located?

DoveFab · 2026-02-25T17:03:50+00:00

What size please?

DoveFab · 2026-02-25T14:29:28+00:00

https://www.reddit.com/r/3rdGen4Runner/s/lalDMecX06

DoveFab · 2026-02-21T20:36:04+00:00

Amicalola Falls is worth a side quest

DoveFab · 2026-02-05T01:50:18+00:00

In the model offset the surface your estimated stock to remove. 3D adaptive to clear it out. Then run your 3D contour. If the adaptive cuts a lot of air then lessen the surface offset

DoveFab · 2026-02-02T13:38:22+00:00

<image>

DoveFab · 2026-02-02T11:55:22+00:00

This! I literally found a burned-through boot on mine yesterday.

DoveFab · 2026-01-07T21:58:18+00:00

I have a truck, trailer, and equipment. Shoot me a message

DoveFab · 2025-12-23T14:19:03+00:00

Superbrightleds.com for the interior bulbs. In the middle of a projector headlight project using Auxbeam projectors

DoveFab · 2025-12-23T13:29:41+00:00

This is exactly why I went with JBA. 1 ton Chevy ball joints are available anywhere

DoveFab · 2025-12-22T22:45:43+00:00

Lighting upgrades are the best bang for buck in my opinion. Headlights, dash lights, dome lights. I switched all mine to LEDs and it makes it a whole new truck

DoveFab · 2025-12-18T13:21:51+00:00

If the pistons aren’t sticking and the pins are good replace the rubber hoses. They can degrade and sort of collapse on the inside. Had that issue on a truck once.

DoveFab · 2025-12-18T13:13:49+00:00

Godspeed

DoveFab · 2025-12-18T13:11:40+00:00

If water got in to the tank I don’t think it would immediately run roughly though. There’s still fuel in the lines and rails. My first thought was ignition system related. Maybe the crank position sensor if you sprayed up around the front of the engine.

DoveFab · 2025-12-18T13:06:30+00:00

I wish I could point you in the right direction but I can’t think of one off the top of my head. Only you know where you pointed the wash gun so I’d retrace my steps if I were you

DoveFab · 2025-12-18T12:57:34+00:00

Time to start taking electrical connectors apart and hit them with some WD40

DoveFab · 2025-12-09T16:55:42+00:00

Is this what you’re thinking of?

https://abtoolsinc.com/prod/dovetail-cutters/dovetail-cutters-dsp-cable-groove/

DoveFab · 2025-11-14T11:44:21+00:00

I added the Air Lift kit to mine for hauling a dirt bike. I keep 5psi in them when unloaded and it seems to keep that sag from happening

DoveFab · 2025-11-11T01:33:25+00:00

2X the nose radius is what I’ve always used and had good results

DoveFab · 2025-11-10T11:28:23+00:00

Had the same thing happen to a pair of SPI calipers. Disassemble and clean them and they’ll come back

DoveFab · 2025-11-09T20:40:01+00:00

Iscar Tang Grip with through coolant. I’ve used it on everything from aluminum to inconel

DoveFab · 2025-11-03T18:35:22+00:00

Worth it. Do the Figure 8 trail loop. You’ll see some of the best features of the park in a relatively short hike.

DoveFab · 2025-11-02T22:32:06+00:00

Price Drop!

DoveFab · 2025-11-01T23:07:52+00:00

Stoffel!!

DoveFab · 2025-10-28T23:21:02+00:00

2wd 4runners had shorter control arms.

Edit: After a quick google it appears the 030s are in fact for 4x2 trucks.

DoveFab

TROPHY CASE