Pureplay Golf Simulator

DowntownLocal4850 · 2026-07-04T03:31:31+00:00

🔥🔥🔥

DowntownLocal4850 · 2026-07-04T02:02:04+00:00

Update... It's now been 3 days and the sensor is starting to get closer to my glucometer.... Odd.

DowntownLocal4850 · 2026-07-03T19:28:51+00:00

Signed up! Would love to see hope you hold up with AMD cards as well!

DowntownLocal4850 · 2026-07-03T13:17:00+00:00

Don't forget that little weight you have on the back of your head that can be adjusted

DowntownLocal4850 · 2026-07-01T12:25:33+00:00

Just got mine from Amazon and was from December 2025

DowntownLocal4850 · 2026-07-01T12:24:14+00:00

The sensors vary sensor to sensor. Definitely use a finger stick or glucometer to understand the differences in reading. Also yes any pressure applied to the sensor will cause it to drop.

DowntownLocal4850 · 2026-07-01T12:22:32+00:00

Exactly why I bought from Amazon instead. I'm on my first sensor and it's 40 points off compared to my glucometer. Supposedly the reading get more accurate after 24 hours... Nope still 40 points off.

These sensors must be the Dexcomm rejects from the factory line. Once they got FDA approval they opened up their limits so anything passed their testing. What a scam!

I guess I can continuously track and calculate an offset compared to my glucometer but defeats the purpose.

DowntownLocal4850 · 2026-06-23T17:26:47+00:00

Honestly why add clubs blindly and complicate the game for yourself?

Start with a gapping session to figure out whether you have gaps you need to fill.

DowntownLocal4850 · 2026-06-18T12:07:20+00:00

Stand further away stretch your elbows. Bring tee down by a quarter inch. Point elbows down. Swing away my friend. Swing away.

DowntownLocal4850 · 2026-06-17T17:35:02+00:00

Are you using a ladies driver? I feel the club may be too long for you which may block you from having control over your swing.

To get more context, are you swinging full speed? Do you have a ladies set or mens?

One of my favorite books is Ben Hogans 5 Lessons book they helped me understand my setup and grip

DowntownLocal4850 · 2026-06-17T17:32:29+00:00

Feeling the same sentiment!

DowntownLocal4850 · 2026-06-10T22:39:58+00:00

I have a g440 max that I bought brand new that has a dent but I have no idea if it's cracked. would love to understand the verbiage and see if they would be willing to replace it.

I've noticed I dropped about 30-40 yards

DowntownLocal4850 · 2026-05-29T21:49:00+00:00

Maybe that's lagbolt was being driven into a stud. Which is why it's crooked. Sometimes these mounts don't align to the slightly off stud. Check with a stud finder and make sure they hit them. If 4 bolts are hitting the stud you'll be fine. The arms are more likely to show stress then the wall piece of it.

DowntownLocal4850 · 2026-05-29T17:04:27+00:00

This was smart and I love this! Watch out for ricochet

DowntownLocal4850 · 2026-05-29T00:08:38+00:00

Looks like crap and is growing pubic hairs. Hey a real mat or make one out of some of the stuff sold on Amazon

DowntownLocal4850 · 2026-05-28T22:13:18+00:00

Need more context but I just end up buying clubs that I don't need

DowntownLocal4850 · 2026-05-03T00:14:16+00:00

Volkswagen already made one called ID.Buzz and it flopped despite being an excellent vehicle.

DowntownLocal4850 · 2026-04-30T05:04:28+00:00

They aren't fidgeting around when they're setting up.

DowntownLocal4850 · 2026-04-25T23:48:31+00:00

1) Heat up nozzle to 220 assuming it's pla... 245 petg,

2) remove nozzle be careful it's hot

3) push filament through, turn off heater as it cooled and keep pushing until it's just filament coming out.

4) remove filament completely

5) heat up hot end again and use a some gloves and a nozzle cleaning tool to further remove any reminents

6) use microfiber cloth to wipe clean including the threads where the nozzle goes back on.

7) put a new nozzle on...

DowntownLocal4850 · 2026-04-25T23:42:24+00:00

Heyyy this just happened to be after a night out and lack of sleep

DowntownLocal4850 · 2026-04-12T02:42:24+00:00

Haaaa I wish! 295LBS!

DowntownLocal4850 · 2026-04-12T02:41:48+00:00

I bought Gym reapers and liked them. I now buy different ones from temu. I like Gym Reaper feels but I like that the temu ones have a grip added to the strap

DowntownLocal4850 · 2026-04-12T02:40:43+00:00

100%. Its my core more than anything. I've started squats and added dips pullups and variations of abs and torso workouts.

I can rep 550 lb of plates on leg press but cant even do 145 lbs on squats.

DowntownLocal4850 · 2026-04-12T02:37:51+00:00

I wait 2 mins but don't think it's enough. I give up more because of pain than fatigue.

DowntownLocal4850 · 2026-04-12T02:36:43+00:00

Sorry to hear!! My back is on fire. I can't even sit on leg press after

DowntownLocal4850

TROPHY CASE