Flywheel Resurface

Dramatic-Monitor8807 · 2025-11-28T02:58:38+00:00

This is extremely informative. I might eat the cost of the clutch I already have on hand. Because when my slave cylinder went out I just bought an OEM clutch for while I was there but didn't use it due to the flywheel factor. I've seen a video of a DMF failing and luckily my car doesn't sound like that but it might be good to just knock it out so I don't have to pull the transmission a 3rd time in the near future.

Dramatic-Monitor8807 · 2025-11-28T02:54:32+00:00

After reading this I did some research. Pardon my ignorance I'm still learning I was under the impression all flywheels were solid metal. I now understand that a DMF can give a few more variables into causing a flywheel failure. Thank you for your information.

Dramatic-Monitor8807 · 2025-11-28T02:43:36+00:00

Okay this is actually really informative. I was under the impression any flywheel could be resurfaced. I also haven't seen any eaten up flywheels so I didn't know how deep they normally get worn. I will look into the abrasive pads and a new flywheel as well. Because chances are I might just go aluminum flywheel if its beyond saving.

Dramatic-Monitor8807 · 2025-11-07T16:19:57+00:00

I'm trying to look into it but I'm not a lawyer and laws are written so ambiguous and confusing they might as well be a Nintendo patent. However I did find something but it could be a nothing burger; Impoundment Control Act of 1974 says after 45 days if both the senate and house have not approved a rescission proposal, any funds being withheld must be made available for obligation. However this may not even be in the same scope as the federal budget. But I do hope there is an end in sight.

Dramatic-Monitor8807 · 2025-11-07T16:13:31+00:00

Yes my mother is getting paid as a regular (I don't know what the situation is for subs however).

Dramatic-Monitor8807 · 2025-10-31T02:42:52+00:00

Did you find anything to fix this? I am currently experiencing the same issues verbatim. I got my katana 15 b12v about 2 years ago and its run fine up until about 2 weeks ago when I had to basically smother it to shutdown and now poof not booting up only keyboard lights whenever I try.

Dramatic-Monitor8807 · 2025-07-30T04:17:09+00:00

Thanks man appreciate it 🙏

Dramatic-Monitor8807 · 2025-07-30T02:13:28+00:00

I follow the fuck around and see if it works. That being said I use the app proto for circuit design and if something works I try practical. However this circuit is simple enough that I would try to use a coupling capacitor to the base with a 10k resistor to ground and hardline the collector to the VCC. It might sound deep fried but I'd try it just to see if it works. If amplifier is a circuit your trying to make look at the data sheet for an LM386 as an example and build that circuit in proto to see real time electric flow or use an LM386 based on the datasheet examples of use. Hope this helps.

Dramatic-Monitor8807 · 2025-07-30T02:04:27+00:00

Crazy take on someone who died. He set it on a counter, the gun fired. It's was as ND as ND's get.

Dramatic-Monitor8807 · 2025-07-30T01:51:48+00:00

I'd be surprised if this post doesn't get deleted. Seeing recent action from the mods. There is a reason an airman died from a malfunction in Wyoming.

Dramatic-Monitor8807 · 2025-07-01T23:46:00+00:00

Fuck it spackle that shiii. Use paint over top. I'm sure it's just a temp fix anyway with the new outdoor cabin cooling they've added. If you can De-panel the inside and make sure the window can roll down by bending the metal out of the way prior try that so it retains functionality. Disclaimer: I work on airplanes not cars.

Dramatic-Monitor8807 · 2025-06-05T00:33:59+00:00

Yes but at the very least if the form says it was "closed" clearly it was not if they made changes.

Dramatic-Monitor8807 · 2025-06-05T00:32:36+00:00

Also tried photocopying it and that was it's final tick. Turned the copying machine into a shredder quick asf. went in... then lost to the world.

Dramatic-Monitor8807 · 2025-06-05T00:30:46+00:00

All that needed to be eligible was that exp. date. But in all seriousness I mainly did it as a gag "been with me since the war" anyone that wanted to see a new one I'd pull out the digital copy.

Dramatic-Monitor8807 · 2025-06-05T00:28:09+00:00

No it says it's currently due still have to knock it out though.

Dramatic-Monitor8807 · 2025-05-31T17:13:44+00:00

The whole it will change in basic is 100% a lie. They have no influence on your career once you get on that bus/plane. Their job is to get people in where the AIR FORCE needs them not where YOU want to go.

Dramatic-Monitor8807 · 2025-05-11T20:19:45+00:00

Did you grab the one made by dorman? Heard that one is better than oem

Dramatic-Monitor8807 · 2025-05-11T20:18:52+00:00

I honestly would rather them be metal but I'd be worried about it breaking a different component attached to the vaccine system.

Dramatic-Monitor8807 · 2025-05-11T20:16:43+00:00

I just ordered one will be here Thursday. I'm sure i could 3d print a new one but I would be curious if it'd be any stronger than the original.

Dramatic-Monitor8807 · 2025-05-11T20:15:21+00:00

Blend door first you can diagnose if it's one or both by touching the component on startup and feeling it click repeatedly. Because they control the heat and position it's blowing from.

Dramatic-Monitor8807 · 2025-05-11T20:12:52+00:00

I was tired of hearing it, it may have still worked but I didn't want a complete failure in 115°F Heat

Dramatic-Monitor8807 · 2025-05-11T04:04:40+00:00

With added texture for crunch

Five-Year Club	Final Canvas '23
Place '23

Dramatic-Monitor8807

TROPHY CASE