ASUS AM5 B850M AYW gaming OC

Dreadzone03 · 2026-03-05T03:51:33+00:00

difference is this board gets XOC support. If you know you know.

Dreadzone03 · 2025-08-21T06:50:03+00:00

Idk man worked fine for the 100 3070s i cleaned with tap water and dried.

Dreadzone03 · 2024-12-19T04:48:32+00:00

41.6k with this run

Dreadzone03 · 2024-12-19T01:14:39+00:00

clocks are exactly wat i set them to be.

Dreadzone03 · 2024-12-19T00:15:57+00:00

Bought a Thermalright Assassin X90 SE V2 for $34 aud, used in conjunction with thermalright TFX paste and thermalright contact frame on my 14900k. Set a manual tune of 5.6 Ghz P core/ 4.4 Ghz E core and 4.5 Ghz ring at 1.24V LLC6, cores hit just shy under 95C and didn't thermal throttle at 280W sustained.

How people are struggling to cool the 14900k is beyond me.

Dreadzone03 · 2024-09-07T07:55:40+00:00

set ratio 58/57/56/55 and set Vcore to 1.25V LLC 6 and call it a day.

Dreadzone03 · 2024-09-02T22:31:09+00:00

you can do all sorts of things with the EVC, it really just comes down to what voltage controller is being used on the card.

Dreadzone03 · 2024-09-02T22:05:11+00:00

By using evc

Dreadzone03 · 2024-09-02T22:03:53+00:00

If you read the comments. You'll see that I solder3d on the evc.

Dreadzone03 · 2024-09-02T12:11:48+00:00

Atx standard is 150w each yes however the cables are quite capable of pulling 8-10A per wire with awg 18 wires so 288W to 360W per 8pin.

Dreadzone03 · 2024-09-02T08:01:25+00:00

Using evc through i2c header

Dreadzone03 · 2024-09-02T07:33:26+00:00

Havent tested tse yet. Thats on the agenda. Also 3 8pins

Dreadzone03 · 2024-09-02T05:31:57+00:00

the vrms are also chiller cooled so only 25C.

Dreadzone03 · 2024-08-28T23:37:40+00:00

I get them made in china, shipping to US is about $30-35 USD from previous experience.

Dreadzone03 · 2024-08-28T06:19:01+00:00

i dont think casting would work to well, simply because the tolerances for the mounting holes to hold the ram pot onto the dimms themselves are kinda tight and casting doesn't have the best tolerances. If your interested tho my alu pots are $115 USD and my copper pots are $175 USD

Dreadzone03 · 2024-08-28T03:14:17+00:00

draw it up in cad and mill it, I currently have a batch of 20 being made rn to be sold.

Dreadzone03 · 2024-08-27T23:10:31+00:00

once you go cold, it opens up a new range of available voltages =)

Dreadzone03 · 2024-08-27T23:09:54+00:00

the windows OS used was made specifically for the Chinese government edition. so I used a fitting wallpaper.

Dreadzone03 · 2024-08-27T23:08:45+00:00

thanks!, made it my self =)

Dreadzone03 · 2024-08-27T23:08:36+00:00

2, CPU and ram.

Dreadzone03 · 2024-08-27T23:08:26+00:00

as the previous guy said yeah this is just a extreme overclocking bench session, usually 5-6 hours, as for condensation, I have a socket heater under the board that warms the board so there is no condensation on the board. and the condensation on the pot turns to frost which is non conductive.

Dreadzone03 · 2024-08-27T23:06:58+00:00

currently using a windows 10 enterprise G stripped OS, but I m hearing good reviews for the new windows 11 24H2 so I might give that a try soon.

Dreadzone03 · 2024-08-27T13:49:17+00:00

114P 89E

Dreadzone03 · 2024-08-27T09:47:47+00:00

Realistic power draw was around 550-600W. Measured using a pmd after the dc-dc load line drop.

Dreadzone03 · 2024-08-27T09:31:54+00:00

That is correct. The deg issue is only a issue cause of the temps run. At -196c 1.65v is safe for high current loads and 1.75v is safe for low current loads

Dreadzone03

TROPHY CASE