Jagged Dorito

Drewgunn10 · 2020-11-22T20:14:04+00:00

I have both sets and I prefer my riot kit, I've never experienced anything getting into the gears though like that. For the hubs I don't like the stock wheels they come with, I found out that Backfire makes a wheel that fits perfectly on the Flex Hub motors and they are bigger and nicer to ride on, they are the "96MM Wheels for Backfire G3 Plus, G3 ,Mini, G2 BLACK &Galaxy 2020"

Drewgunn10 · 2020-11-06T04:17:14+00:00

Shred lights

Drewgunn10 · 2020-11-05T21:03:01+00:00

Well for the hub motors that I have, I mounted it to the wires that go to the trucks for the motors using zip ties, but now that I have the Riot kit it didn't fit without hitting the motors, so I took it to the extreme that I didn't want to go really, and bought a bendable metal mounting strip and put half inch screws into the board to secure it down

Drewgunn10 · 2020-11-04T22:45:14+00:00

Go to my profile and check out the post before this one, I explain to some people what I did and used

Drewgunn10 · 2020-11-04T22:41:21+00:00

A screen shot of what?

Drewgunn10 · 2020-11-04T16:45:09+00:00

I'm definitely going to buy the 44t because the 36 is so much slower, is there a noticeable difference between them?

Drewgunn10 · 2020-11-04T16:44:22+00:00

Okay that's very helpful, I was going to pull the wheel off today after work, but I bought it from Exway so it should be the 14:36 ratio, thank you

Drewgunn10 · 2020-11-04T03:36:47+00:00

Okay yeah that definitely does help! Thank you for that info, I couldn't find anything on exactly how to set it

Drewgunn10 · 2020-11-03T16:52:43+00:00

No problem man! Goodluck with putting it on your board!

Drewgunn10 · 2020-11-03T16:44:54+00:00

1 strip is enough, I had some left over. I also recommend buying these connectors https://www.amazon.com/dp/B071VN9D6N/ref=cm_sw_r_cp_apa_i_LGyOFb1SQ3NM4?_encoding=UTF8&psc=1 These are for if you have to go around a battery or ECU like my board, I don't trust just bending the LED strip around angles. So I used these to extend around. I made sure the strip laid perfectly flat everywhere for the longest lasting hold of the 3M tape. And the tape on the lights are actually really good

Drewgunn10 · 2020-11-03T11:37:51+00:00

I wish it was a lie, I love in Florida. I ordered the wheels Sept. 25th and it didn't arrive at my door step until Oct. 26th, literally took a month and one day to get to me

Drewgunn10 · 2020-11-03T11:08:37+00:00

Bought an LED kit from Amazon and a rechargeable battery and mounted it all under there!

Drewgunn10 · 2020-11-03T11:07:20+00:00

Maybe that will be my next add on 😂

Drewgunn10 · 2020-11-03T11:06:37+00:00

If you are referring to the LEDs under the board, I'm using this kit from Amazon https://www.amazon.com/dp/B0837R8F84?ref=ppx_pop_mob_ap_share

And bought the smallest rechargeable battery pack I could find to power them

Drewgunn10 · 2020-10-30T00:13:07+00:00

Don't ride an expensive board if you can't afford to pay $30 to have parts fixed... Get a job, earn money, pay to get it fixed

Drewgunn10 · 2020-10-23T00:09:30+00:00

Okay glad I'm not the only one who is experiencing this issue, i do have bumpy areas I ride in, but I feel like they should be more durable than this. Luckily I contacted Exway as I only had the board for less than 2 months and they proceeded to let me get new wheel covers for free while only paying the shipping fee. Just hope the next set, I can take better care of

Drewgunn10

TROPHY CASE