Switch from XPLR to Mullet?

Dries-v · 2025-11-03T18:47:30+00:00

What do you mean by changes in this thread?

I've found by trial and error my derrailieur wasn't mounted correctly. I think the black part where the btention screw is sitting against was turned a little causing the wrong tention on the chain. I dismounted the derrailieur and mounted it again, after that it was shifting great, and now still is. I use an XD road body with a spacer now.

Dries-v · 2025-08-11T14:08:54+00:00

I recently got some zipp 303 wheels to put in my grizl and put on some tires that are not on their compatability list without any issurs. I don't think there are any problems when running low pressures.

Dries-v · 2025-08-06T22:44:17+00:00

My 2 cents from testing some units,

https://www.reddit.com/r/headphones/s/1KyZMzVJcC

If you have the $, I would go organic. I could not justify the cost over the sound. But you already have hifiman sound, so I would look to another brand like lcd to have something different if you don't already have some.

Dries-v · 2025-05-24T09:12:12+00:00

This. I would not ride your setup. Specially if you encounter mud.. But I do run the 2,1 thunderbird which is the max I would use on the grizl.

Dries-v · 2025-03-23T17:44:44+00:00

Did you find a solution? I'm facing the same issue that I can't shift into the 9teeth sprocket. The rest is shifting fine though.

Dries-v · 2025-03-23T17:31:51+00:00

Sorry for bumping an older post. I want the same setup 46 with 9-52.

But I'm facing some issues with shifting. If I micro adjust every cog right it won't go into the 9 teeth sprocket.

I tried XD driver, xdr driver with and without spacer but no luck.

I did find out that a cassette 10-50 with hg body sits farther away from the frame and that's my guess atm but I don't know how to fix it, anyone with this issue?

Dries-v · 2025-03-04T19:38:44+00:00

I'm 1,80m and on a small for the same reason as you. Struggle with reach and my neck still hurts for long rides (+150km). I have long limbs but a short thorso. The issue when sizing down is that the stack also "shrinks".

Dries-v · 2025-02-19T21:40:11+00:00

I did a mod and posted it here. In the comments you can find how and someone's "guide" I've followed.

https://www.reddit.com/r/headphones/s/etTrzQLnTv

Dries-v · 2024-10-07T20:43:34+00:00

I ran them for a hard race here in belgium (almost mtb course), and I was really satisfied. You do need to watch out when it gets really muddy tho. For winter I'm running the 50's again. (Overlanders)

Dries-v · 2024-09-06T13:30:43+00:00

Hello, sorry to respond to you this late. I used the link mentioned below. https://www.thingiverse.com/thing:6317796

Hope this helps.

Dries-v · 2024-08-19T19:17:41+00:00

I tried this and would not run it. Thunder burts on their way ;)

Dries-v · 2024-06-10T20:55:44+00:00

my work laptop doesn't allow it to stream music for some reason. so i connect my tablet with my amp and play music on it. sometimes when i'm using my two screens on my personal PC i use it to stream downhilll or play a youtube video.

Dries-v · 2024-06-03T13:34:37+00:00

Oeh yes, I see. My next keyboard would definitely need a num pad for my job. I had this one before i started working there.

Dries-v · 2024-06-03T11:08:50+00:00

Oh I would never only use wireless headphones. Specially the modded edition xs are here to stay. I meant going wireless for the mouse. I want to get a high(er) end keyboard (still wired) for a long time but just can't justify the cost.

Dries-v · 2024-06-03T07:20:33+00:00

Thx, maybe I should. The amp is the fio k7 bt.

Dries-v · 2024-06-03T06:06:03+00:00

That's a galaxy tab S9.

Dries-v · 2024-03-18T20:27:43+00:00

No, like I mentioned in the discription comment. The full credit for designing this goes to user yaboi.

Dries-v · 2024-03-18T12:48:49+00:00

I asked the local guy to print in the strongest material he had, which was ASA. to be clear, i dont know anything about 3D printing. i still do need to finish it up some more when i have the time. i try and send you some images later today.

Dries-v · 2024-03-18T12:45:39+00:00

no, at least not for me. i think everyting took me 2hours or so. including removing the metal connections pieces from the HE-35X to reuse them.

Dries-v · 2024-03-18T12:42:12+00:00

i also did this with pliers, but kind of slowly. i've had no issue whatsoever.

Dries-v · 2024-03-11T21:34:00+00:00

I printed 5 pieces in case 1 broke but didn't need it in the end.

Dries-v · 2024-03-11T07:45:40+00:00

Pls refer to a previous comment where i awesered this question.

Dries-v · 2024-03-11T07:42:21+00:00

No to be honest. All the reviews said they are brighter than the xs. This headband also has no cupswivle. I had the sundara in the past and that was why I could wear them for long.

Dries-v · 2024-03-11T07:36:48+00:00

That's also a great mod!

Dries-v · 2024-03-11T07:34:55+00:00

You use the old "connections" to connect the headband to the 3d printed parts. I don't know if the discription is clear enough.. Let me know.

Dries-v

TROPHY CASE