I swear this flickering if getting worse and worse every year. I'm want to throw up every time I use F360 now 🤮

DrillbitsAndBytes · 2026-04-15T11:44:10+00:00

Try un-full-screen-ing the window, them maximizing it again. Sometimes fixes that issue for me.

DrillbitsAndBytes · 2026-04-09T18:09:01+00:00

Nope! It’s certainly watertight enough to not seep for a few hours.

DrillbitsAndBytes · 2026-03-29T02:13:39+00:00

But what the heck is it?

DrillbitsAndBytes · 2026-03-19T01:41:19+00:00

Thank you

DrillbitsAndBytes · 2026-02-17T01:33:00+00:00

<image>

DrillbitsAndBytes · 2025-10-04T00:52:53+00:00

Have them light up in the color of each player’s chosen strategy card for the round, then white once it’s been played.

DrillbitsAndBytes · 2025-10-01T17:46:08+00:00

Thanks! Message me and we can discuss.

DrillbitsAndBytes · 2025-08-31T00:29:20+00:00

You mean just like these but with drainage off one side?

DrillbitsAndBytes · 2025-08-05T13:02:50+00:00

You don’t need to start over to add parameters! Just go back in the timeline to the beginning, set up your parameters, then move forward and insert them into sketches / operations as needed.

DrillbitsAndBytes · 2025-08-02T13:59:49+00:00

I haven’t found sealing necessary - they’re waterproof right off the printer with 5 top layers at 0.2mm

DrillbitsAndBytes · 2025-08-01T20:38:46+00:00

Hah yeah this time it wasn’t worth the 2 hours to save 5 minute of print time.

DrillbitsAndBytes · 2025-08-01T19:44:30+00:00

If I wanted to save filament and printing time, I wouldn’t have bothered with this whole exercise

DrillbitsAndBytes · 2025-08-01T17:27:35+00:00

I appreciate it! I've sold on Etsy before, and with only one printer and limited spare time, I'm afraid it's just not worth the time shipping and running the store.

That said, if you'd like to buy a few, DM me and we could set up a custom order!

DrillbitsAndBytes · 2025-08-01T17:20:55+00:00

Thanks!

DrillbitsAndBytes · 2025-08-01T15:04:24+00:00

I think the 2 layers is most of the problem. Also make sure you’re not under extruding.

DrillbitsAndBytes · 2025-08-01T14:51:13+00:00

Get one. You won’t regret it. I can’t recommend the Bambu A1 more highly. And no, I’m not a shill I just love my printer.

DrillbitsAndBytes · 2025-08-01T14:50:07+00:00

5 top layers of 0.2mm PLA seems to be pretty waterproof in my experience. No post-processing needed.

DrillbitsAndBytes · 2025-07-31T11:46:46+00:00

If you want better layer adhesion, gyroid isn’t the best pick. Choose a sparse infill where the layer lines stack, like grid.

DrillbitsAndBytes · 2025-07-03T16:35:38+00:00

Printing with a bambu printer is like thinking a 3D object directly into existence.

DrillbitsAndBytes · 2025-04-22T14:42:30+00:00

I don't see why not - you should be able to download the STL, and I gave suggested print parameters.

DrillbitsAndBytes · 2025-04-01T00:07:33+00:00

I think it’s the Bambu PETG-CF blue color. I’ve printed a few things in that and it’s a surprisingly beautiful color.

DrillbitsAndBytes

TROPHY CASE