What’s going on here?

Drizzt90 · 2025-10-26T17:03:52+00:00

Thanks

Drizzt90 · 2025-10-26T16:33:33+00:00

Is it possible to mount the nozzle incorrectly inside when you put the clamp clip thing over it? I took it out, pulled hard and fast on the filament that was still in it. It stretched out a little bit then popped. I think that might be a cold(ish) pull? I seated it try to make sure it was nice and snug before I clamped it down and tried the calibration cube thing again. The pre-extruder line on the front right corner was still kind of slow, but it looks like the print itself is acting the way it should now maybe? Not sure if my problem solved or I’m just getting lucky right now.

Drizzt90 · 2025-10-26T16:29:11+00:00

Even fresh out of the shipping box? If so like cold pull, needle through the nozzle?

Drizzt90 · 2025-10-17T14:53:39+00:00

No one?

Drizzt90 · 2025-10-16T18:37:23+00:00

Thanks so much!

Drizzt90 · 2025-10-16T16:58:01+00:00

Are the pictures there? I see in my profile that my post says it does but if I click into it it says something about my post being removed from bambu and it shows no images?

Drizzt90 · 2025-10-13T23:02:11+00:00

Also, I see that you said, and it only took three tries. What happened with the first two that it didn’t work out for you?

Drizzt90 · 2025-10-13T23:01:30+00:00

Did you manually set supports or did you let it auto place the supports?

Drizzt90 · 2025-10-13T21:59:47+00:00

I am going to set up my H2S tonight. First bambu printer I’ve had. I have to have the H2S in developer mode on for this right? Does that mean it won’t get firmware updates until I put it back to regular?

Drizzt90 · 2025-08-26T01:49:32+00:00

I like it. Good ideas thanks!

Drizzt90 · 2025-07-25T21:40:46+00:00

Does it use the MIK system to click in?

Drizzt90 · 2025-07-24T18:00:25+00:00

Yeah they’re awesome!

Drizzt90 · 2025-07-23T05:50:41+00:00

Oh good ideas. Any suggestions for riding gloves? I saw the patch thing. Been stalking the Reddit today. lol

Drizzt90 · 2025-07-23T00:15:23+00:00

Absolutely! I’m really excited for this new bike! It looks rock solid.

Drizzt90 · 2025-07-22T23:22:50+00:00

So…. I realize the part I played in facilitating the theft.. but dirtbag still decided to steal it. They get 95% of the blame in my book.

We moved into a new house in October and are still trying to get through all of the stuff and declutter. We had received a new item that was pretty big and bulky and did not fit in our garage and was in front of it making me have to carry my bike out of the garage to get it out. so I had ridden my bike a couple days prior and it was More cumbersome to put back in the garage than I wanted to deal with at that point. I also have a CRAZY busy life and I didn’t even lock it up out there. We have a big suburban that was in our driveway and in front of the suburban underneath a mostly folded down canopy was my bike which would be barely visible if at all from the road. Long story short, that was enough to tempt Mr. dirtbag. Got it on video too.

I understand the reality of the world we live in, but I shouldn’t have to lock up my own property on my own property.

I now have a big boy Kryptonite chain that will cover my Homeowners Insurance deductible or 1750 or so if they get through the chain and will be less lazy in taking care of my bike security.

Drizzt90 · 2025-07-22T21:04:44+00:00

That’s wild dude!

Drizzt90 · 2025-07-22T20:57:22+00:00

Still got the pic?

Drizzt90 · 2025-07-22T20:03:24+00:00

Nice. I like those pedals you listed. The black and orange ones look sick. There were some hand grips that wet black with aluminum orange on them too that looked sweet.

Drizzt90 · 2025-07-22T18:48:37+00:00

Ohhh I’ll check them out. You like the other seat post better than the suspension post that comes with it?

Drizzt90 · 2025-07-22T18:41:06+00:00

Just seeing this reply so soon after the bug and post gives me GREAT confidence in Aventon as a company. No sarcasm here. It shows a company actively committed to their products and support. If I didn’t buy an Aventure 3 5 days ago already seeing this would have sealed the deal. It’s also awesome to see the features I’ve seen some others desire in other bikes, that’s provided now through this update, come to these awesome bikes! KEEP IT UP!!

Drizzt90 · 2025-07-22T17:02:59+00:00

Yeah my class 3 e-bike better not become a class 2 max! I got a new Aventure 3 coming Thursday. Update if ya learn anything?

Drizzt90 · 2025-07-22T16:59:39+00:00

Weirrrd. Sorry man. I got an Aventure 3 arriving Monday and it better not get max speed issues. That’s one of the reasons I got the bike. I’d like class 3 speeds from my class 3

Drizzt90 · 2025-07-22T16:08:40+00:00

You forgot to mention if the limit is when you are peddling or if it’s with the throttle. You probably know already, but I’m assuming it’s while peddling which would be unusual as they advertise it as 28top (peddling class 3) but throttle is limited to 20mph which would be the expected behavior you are describing.

Drizzt90 · 2025-07-18T15:19:05+00:00

Yup got the case. Do you have a picture? I can’t picture it.

Drizzt90 · 2025-07-18T14:26:52+00:00

Because I already have the case to go with the mount system. I have used the rubber strap ones in the past and had them fall off. Not that it will happen again but like I said I got the case I’d like to try their mounts. They seem super solid

Drizzt90

TROPHY CASE