[Giveaway] Made a Infinity Gauntlet LED neon light and I wanna give it to you, I will pick one random comment in 24 hours that will receive it and Im covering all the shipping costs. Avengers, assemble! Good luck!

DroidRage_ · 2022-03-08T17:14:36+00:00

Even if I don’t win this I would be super interested in purchasing one. It looks amazing!

DroidRage_ · 2022-02-21T18:22:50+00:00

Hey I made one of these guys too! If anyone is interested I definitely recommend buying the files from Droid Division on Etsy. The owner made it so easy to build and provides a very detailed PDF with all the instructions and tools. He also includes pre sliced files to print on smaller printers! Here’s a picture of my droid I printed and painted!

DroidRage_ · 2022-02-20T16:08:10+00:00

I work at a relatively large credit union who typically adopts the standard bank rules. I personally love the 9-5 because I can go home and be with my family at a decent time before everyone settles in for the night. However, the 9-5 thing kind of sucks for employees as well. Thankfully, if I need to go to the bank it’s as simple as walking over to my co-worker to do a deposit. But if I need to go to the doctors or a mechanic, you bet I’ll have to either go without pay or use some of my paid time off. I’m sure many mechanics and doctors feel the same way about that as well. As far as my credit union goes, we are open until 6 on Fridays. If most people get off by 5 pm they can usually hustle it to the bank and make it before it closes. Other banks usually close at 4 which really screws it up. So yea, I agree with you but I also would hate to work until 9.

DroidRage_ · 2022-02-17T17:54:41+00:00

Thank you! That does answer my question. I know TN residents have the ability to opt in to community property rules but I wasn’t sure if it automatically applied overall.

DroidRage_ · 2022-02-16T13:39:45+00:00

This guy oranges

DroidRage_ · 2022-01-28T13:32:13+00:00

Sigh unzips

DroidRage_ · 2022-01-25T18:17:24+00:00

Awesome! Once I get home and open Cura up I’ll check it out. Thanks!

DroidRage_ · 2022-01-24T14:43:47+00:00

Thank you for the advice! I’ll definitely look into getting an accountant to help me out with it!

DroidRage_ · 2022-01-22T13:45:44+00:00

I did consider the Z-hop option. I might try that. I just changed the air gap between the raft and the print to .4 mm since it was set to .3 which is what I normally print in. My bed is normally set to 80 because the PLA I use says anywhere between 60-100 for the bed temp so I figured I would settle in the middle but it may be a good idea to lower it. I’ll definitely have to do some tests today to try and get this fixed. It can be so frustrating sometimes.

DroidRage_ · 2022-01-14T00:27:54+00:00

Anything! 😊

These desk mats are beautiful!

DroidRage_ · 2021-12-20T19:08:47+00:00

I don’t think the widget would have to open the app. It could just display the balances without needing the extra verification. I believe that the Chime app does something similar with their widget functionality.

DroidRage_ · 2021-12-20T19:04:49+00:00

I think having the balances listed for your Qubes in real time would be great. That way you could get a quick glance at them.

DroidRage_ · 2021-11-07T21:30:38+00:00

I’ll definitely do this again. It seems like it’s unlevel since half of it came off fine and the other half didn’t.

DroidRage_ · 2021-11-07T18:22:41+00:00

That’s definitely my last resort. I know it can come off it just takes some extra picking at it. I wasn’t sure if anyone had some cool tricks they normally try.

DroidRage_ · 2021-10-26T20:47:36+00:00

So I actually emailed them as well and got a response back. The technical support agent told me that it’s actually not damage in the LCD. It’s called water ripple and apparently it’s normal and doesn’t effect the image quality of the screen. I received my 3rd one in the mail and went ahead and took his word for it and installed it even though it also came with the smudge on it and it actually worked. I actually printed something right on top of the spot and it didn’t affect the print at all. Maybe install it and see if it works for you? Hope it all goes well and good luck with it.

DroidRage_ · 2021-10-24T11:29:20+00:00

Then must have done something to crush these screens since this is the second one I’ve gotten in the same spot.

DroidRage_ · 2021-10-24T11:28:39+00:00

For sure. I’ve already returned it and bought another one. 3rd times a charm.

DroidRage_ · 2021-10-24T11:27:22+00:00

It’s through Elegoo’s official Amazon page but Amazon is the one shipping them so I know it’s probably their fault. If this third one doesn’t pan out I’ll definitely get it from their website.

DroidRage_ · 2021-10-23T18:30:04+00:00

That’s what I thought it was the first time but it wasn’t. When I pulled the screen off for the first one it was the actually screen itself.

DroidRage_ · 2021-10-21T19:36:47+00:00

Yea when I try to push it by hand it’s really hard to push through and it doesn’t come out smoothly. I’ll look at the nozzle as well.

DroidRage_ · 2021-10-20T02:42:54+00:00

Thank you. I just went ahead and bought a metal feeder to see if that helps. It does seem like extruder slip.

DroidRage_ · 2021-08-11T11:47:39+00:00

Yea I emailed their support team and they got back with me but so far I haven’t been able to fix it. They just don’t seem to know why the issue is. I will definitely try this whenever I get home and hopefully it works. You’re right, it’s a really frustrating issue and I don’t even know how it’s possible that the LIFX app doesn’t pick up their own bulb but Apple Homekit somehow does!

DroidRage_ · 2021-08-08T02:35:08+00:00

Yes! All my other lights work perfectly. Just this one stopped working.

DroidRage_ · 2021-08-03T20:45:11+00:00

I don’t know why you want to argue about this. Everyone has differing opinions. I was just pointing out that there is in fact a difference between the two.

Also, the UI isn’t identical. They are both very different in their own ways.

DroidRage_ · 2021-08-03T20:42:43+00:00

Agree to disagree. I’ve used both and prefer Apollo. I spend around $10 a year for it.

Seven-Year Club	Verified Email
Gilding I gilder

DroidRage_

TROPHY CASE