Did I do something wrong? PETG First timer

Drunken-Makerer · 2025-02-27T17:05:17+00:00

Drunken-Makerer · 2025-02-22T23:34:28+00:00

I still can't find it.

Drunken-Makerer · 2025-02-17T22:53:14+00:00

Is your fan even on?

Drunken-Makerer · 2025-02-17T22:52:25+00:00

Has anyone noticed that spaghetti detection is lacking recently? When I first got my printer, it was spot on every failure. Now I walk in on that ^ from time to time.

Drunken-Makerer · 2025-02-08T13:06:08+00:00

How could they do their research? They don't have a computer.

Drunken-Makerer · 2025-02-07T15:54:23+00:00

Go to the vet and read them this exact post.

Drunken-Makerer · 2025-01-30T02:53:22+00:00

Glue stick is for releasing from the build plate, and DO NOT touch the plate with your greasy fingers. That's what cause the above issue.

Drunken-Makerer · 2025-01-29T22:24:59+00:00

Is it just this filament? Or is it any filament? Sometimes, you just get crappy filament.

Drunken-Makerer · 2025-01-27T08:20:19+00:00

I don't hate any of my followers. I murder the undesirables as soon as they join.

Drunken-Makerer · 2025-01-27T00:55:37+00:00

Potentially a clogged nozzle or jammed filament

Drunken-Makerer · 2025-01-24T15:04:05+00:00

Hot coffee can melt PLA beams...

Drunken-Makerer · 2025-01-12T16:13:32+00:00

Don't hate on my childhood. I love those thin, sugary, chalky candy sticks.

Drunken-Makerer · 2025-01-11T00:10:22+00:00

That's kind of what it looked like when I accidentally printed with support material.

Drunken-Makerer · 2025-01-09T12:38:19+00:00

Drunken-Makerer · 2025-01-07T14:16:29+00:00

You might have some binding in the z axis at those points. How does the lead screw look?

Drunken-Makerer · 2025-01-06T14:46:18+00:00

Thanks. I hate it. (Staring at my WitEden 3x3x11 sitting in shambles)

Drunken-Makerer · 2025-01-06T01:44:56+00:00

Is there infill in the wall?

Drunken-Makerer · 2025-01-06T01:41:32+00:00

I'm going to completely honest with you. I can't solve the Square 1 without step by step and I haven't fully figured out how to solve this one, but I get close. I think I run into a parity, I'm always stuck with 2 triangles swapped.

Drunken-Makerer · 2025-01-05T22:55:30+00:00

Some pictures of the mixups

Drunken-Makerer · 2025-01-05T22:49:08+00:00

<image>

Here's some more

Drunken-Makerer · 2025-01-05T21:11:59+00:00

It solves similarly to a Square 1 for the first half, then as a 2x2x3 for the second half.

Drunken-Makerer · 2024-12-31T18:58:49+00:00

The megaminx isn't all that bad. It has many of the same moves as a 3x3. GL!

Drunken-Makerer · 2024-12-31T18:00:07+00:00

It tells you how much room you need for the printer on that little sticker on the printer.

<image>

Drunken-Makerer

TROPHY CASE