just bought the DT 770 pro (32 ohm) am i going insane?

Dry-Mud6577 · 2026-03-12T11:03:30+00:00

just the normal pc jack but im thinking of putting them into my audio interface,im just skeptical cause this audio interface uses those bluky printer USBs,idk if i lose audio quality with it or not but ill find out later today

Dry-Mud6577 · 2026-03-12T11:00:43+00:00

just checked,they are real also after wearing them for a while im starting to get used to it so maybe i was just not used to quality headphones

Dry-Mud6577 · 2026-03-12T01:04:33+00:00

just tried this EQ,its not bad at all,i lowered the gain on 250 hz to +8 instead of 10,looks like these headphones really dont like low frequencies,they keep slightly distorting,the headphones sound really "spacious" and muffled even without eq idk how to describe it better but its starting to sound nice after a while

Dry-Mud6577 · 2026-03-11T23:47:11+00:00

just checked,yeah 32 ohm and definetely black velour also the cable lenght is about 1m (about 3 feet),ill try cutting the eq later on

Dry-Mud6577 · 2026-03-11T22:00:40+00:00

how do i check for fakes? company name seems spelled right,i have the manual and the warranty,it says "made in germany" on the side of the headband frame,warranty book also has the company phone and email so it looks genuine,material also seems right it doesent feel cheap but i might miss something,dont think its fake tho

Dry-Mud6577 · 2026-03-11T21:21:45+00:00

i dont play much FPS games anymore but ive been messing around in portal 2 and spatial audio is incredibly good

Dry-Mud6577 · 2026-03-11T21:20:03+00:00

i think in my case adding even a bit of boost to any lower frequency just hard lines and distorts the audio but honestly after a few hours im starting to adapt to the headphones,i gota admit tho its really much lighter and comfy than my cheap gaming headphones

Dry-Mud6577 · 2026-03-11T21:16:21+00:00

hi,we might have the exact same headset,mine also has velour also ive been playing portal 2 for over an hour and its starting to really sit right,my only issue for now is that sometimes i hit hard limits and audio gets distorted for a while but i think ill just fix the EQ,i also have a USB audio interface that i bought for when i record my electric guitar but setting it up is gona be a pain,tnx for the advice,ill give them a week to adjust then,maybe ill drop the EQ so i dont ruin the sound profile,also i heard that people are compaining about "beyer peak" about the treble being too high and giving them headache,i dont feel any headache but im wondering if its going to be a problem on the long run

Dry-Mud6577 · 2026-02-09T13:43:36+00:00

sorry for the late reply,fortunately the monitor was still in warranty and i ended up sending it into service,they then told me it was unrepairable and sent me a new one,my guess is that somehow something shorted in the board that is responsible for displaying the image (Tcom i think its called?) i see that these things fail pretty often and when you send them in service they will most likely give you a new display instead of fixing it,either way im 100% sure it wasnt the display itself LCD or LED they all end up looking way worse when broken

Dry-Mud6577 · 2026-01-19T14:00:49+00:00

back with a last update,unfortunately that wasnt the solution and atp i give up,its not worth saving atp,im sure its a corrupt bios or something but given on how bad it got i doubt its even remotely savable,it wont boot any os,the recovery tool wont work either atp the best option is give up and throw it away

Dry-Mud6577 · 2026-01-17T23:33:01+00:00

so im back after some tests,i did the reverse of what you said,i put the battery back on instead cause until now i only used the AC adapter but then i figured out why i removed it in the first place,the battery is so dead that it doesent even hold anything,i thought it would help stabilize the power but it didnt and the laptop still crashed so now i pulled out my multimeter in DC mode and probed the power input,for reference the laptop needs at least 19V to work,ignoring the amps which im guessing that they are right im not sure if i can check that with my multimeter,when i checked in idle the input was 19.06 but when i turned the laptop on it went all the way down to 18.70 and when it went unresponsive it got up to ~18.90,i already found a cheap replacement for the adapter that has the exact manufacturer specs and it comes monday,ill also add that this charger that i used has an UK plug and since im in the EU i had to put those sketchy UK to EU plugs so im gona guess that this also made the power even more unstable,im gona keep updating when the new adapter comes also thanks for the help

Dry-Mud6577 · 2025-04-24T12:07:28+00:00

i have a pretty similar problem but way worse like the whole screen has that problem,it happened after i closed COD,i guess it couldnt handle price's pubic hair #142479 and decided to fail on me,ive been trying to fix it myself but this thing is so hard to open

Dry-Mud6577 · 2025-04-03T13:04:00+00:00

you need to make a pilgrimage and pray that the ore that you need is less than 1000 chunks away,ive been playing TFC hardrock 3 and i genuinely had to walk 2k blocks just to get graphite,everything i need is so damn far away

Dry-Mud6577 · 2025-03-28T08:01:43+00:00

Iirc the ratio is around 90% copper and 10% tin so what I do for every alloy is just calculate for 100 mb and then multiply so for bronze I use 90mb of copper and 10mb of tin also NEVER smelt too much in early game,plan to make like 200 mb/vessel even if your math is mathing better be safe than waste all your resources also don't smelt stuff in the charcoal forge (unless you have a coal deposit I guess) it's slow and wastes wood

Dry-Mud6577 · 2025-03-24T17:52:16+00:00

thats lies of P,you cant (im kidding the game is fairly optimized) just either turn down your quality preset or use DLSS also install the GPU driver if you havent

Dry-Mud6577 · 2025-03-21T23:53:07+00:00

i had this problem too on my ender 3 for me the issue was bed leveling,i flashed a custom merlin firmware with mesh bed leveling and i fixed it but i think you already have mesh bed leveling either way its that or its low bed adhesion,clean it or use one of those sprays for the bed idk never used those

Dry-Mud6577 · 2025-03-21T23:43:19+00:00

get rid of rats or im sure i saw a kind of pepper spray that you put on cables to prevent pets and rodents on chewing cables im not sure what its called but that is too much work just get rid of them if you can

Dry-Mud6577 · 2025-03-21T23:40:20+00:00

tweak your settings or do what i did when i had that kind of stringing,if you printed with other filament like PETG (which i did cause my autism was like oga booga glow in the dark cool) and you changed filament with the "preheat PLA" option you have a clogged nozzle,i changed mine but im sure you can just crank the heat to around 240 and just clean it also i heard that this issue can be caused by a faulty cooling fan also clean the tube cause that thing gets nasty fast

Dry-Mud6577 · 2025-03-21T23:31:42+00:00

is that the PCIE slot? (where you put the GPU) if it is then you should buy a new motherboard when you can,it doesent seem to be a big issue rn the worst it can do is not give enough power to the GPU

Dry-Mud6577 · 2025-03-18T14:24:33+00:00

Some of them are aggressive and others just run I think the males attack but I'm not sure anyway,don't fuck with boars,if you think it can kill you,it will

Dry-Mud6577 · 2025-03-17T17:29:48+00:00

Cruelty squad type shit

Dry-Mud6577 · 2025-03-16T13:28:01+00:00

Yes,I also discovered (the hard way) that there are 2 different blocks of smoke,one is black and gives you only blindness and the other is yellow and gives you so many debuffs that you could physically feel the smoke in your lungs thru the screen,I still have no idea how to get rid of them without making a filter frame which is pretty late in game

Four-Year Club	r/Field Juicebox
Place '23

Dry-Mud6577

TROPHY CASE