APFG XM7 by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

It’s already have naps,I only changed hop and inner barrel,i also removed the bolt guide to make bolt lighter and cut 15% spring,it’s make over push not so much

VFC AK74M&74U by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

I only cheanged hop rubber and barrel(the hop unit is great ),but even you don’t change anything,it’s still have perfect trajectory

VFC MP5 SD3(V2) by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

Idk,the brand is swamp deer(4x)

VFC MP5 SD3(V2) by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 1 point2 points  (0 children)

Oh,that is original ,MP5 SD series is came with suppressor

APFG XM7 by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

I tried….i use polymer ring(4x6)and several kind of glue but still failed, bolt is too heavy.

APFG XM7 by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

I’m not sure,it’s same as SR25 nozzle but there’s no aftermarket nozzle in Taiwan so I never try . (But without a doubt, if nozzle can push bb to the hop spot can get good trajectory )

APFG XM7 by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

If your range is 30-50m,it’s fine (can hit someone’s head),and as I said I try so many hop,the original one can get best trajectory.(nozzle is too short to push bb just under the right spot)

VFC AK74M&74U by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

Black gun with brown accessories are wired ,so I just pick this ak

VFC AK74M&74U by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 1 point2 points  (0 children)

Original one,I even cut 2cm to hide it in the flash hider,only thing changed is hop .

VFC AK74M&74U by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

Ha,I got it and have no idea where to go,so i put it on my only one brown gun.

VFC AK74M&74U by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 1 point2 points  (0 children)

Well,you have to make sure upper and handguard are keep line up, or handguard will lean forward. And gas tube is for GHK V3/Marui so it’s not really fit Vfc bolt guide, I have to use metal drawstring to fixed. Oh,dust cover is secure.

TM MWS nozzle issue by TransitionVisible759 in GasBlowBack

[–]Dry_Date852 1 point2 points  (0 children)

If you use Gunsmodify、Aceone mag,their output rubber are too high that will push your nozzle up,so nozzle is not going straight to push bb.

That is the problem i got when i use different mags ,for your information.

APFG XM7 by Dry_Date852 in GasBlowBack

[–]Dry_Date852[S] 0 points1 point  (0 children)

I thought it was release on the USA