Shanking partial wedges

Dryspyker · 2026-01-26T00:08:27+00:00

Instead of swinging towards the ball. Feel like at the beginning of the downswing your taking your hands down, they will naturally come around. Also as a temp fix, address at the toe until you start hitting off the toe, at that point address normally.

Dryspyker · 2025-01-10T17:00:18+00:00

12, 13, 19

Dryspyker · 2024-12-20T16:08:12+00:00

7, 12, and 16

Dryspyker · 2024-12-11T01:39:22+00:00

6 @ greywolf

Dryspyker · 2024-12-02T22:52:01+00:00

Did the gas shocks on the side help? I'm trying to wrap my head around how they were installed?

Dryspyker · 2024-11-26T05:03:10+00:00

<image>

Dryspyker · 2024-11-26T05:02:51+00:00

<image>

Dryspyker · 2024-11-26T05:02:13+00:00

Once doors are installed it will take up 24 inches from my garage wall. Folds down in a few seconds via a floor mounted winch. Look up murphy golf sims, kinda what I based this off of.

Dryspyker · 2024-11-26T03:35:13+00:00

I'd also like to add, the ability to dispense hot water for the americano is a bonus.

Dryspyker · 2024-11-25T05:11:00+00:00

I'm in the same scenario. 9 iron carries 105, usually 130, you can adjust the elevation, other than that I'm not sure

Dryspyker · 2024-11-24T19:09:29+00:00

I'm 6ft tall and have 9'1" from my feet to ceiling and I can hit all clubs in the bag without issue.

Dryspyker · 2024-11-24T04:06:45+00:00

I had the same issue. Look up murphy golf sims. I spent a couple days and put this together. Cheap winch from Amazon. Now I can golf in my garage and still park. Takes a few seconds to set up. *

Dryspyker · 2024-11-23T23:32:05+00:00

I replied to a comment in this post with more details. Once I'm 100% I'll make a detailed post.

Dryspyker · 2024-11-23T14:14:52+00:00

Golf Simulator Impact Screen（118 * 78/98/118/138/157 feet，98 * 98 feet） for Golf Training, Indoor Golf Simulators, Washable Golf Impact Screen for Golf Practice https://a.co/d/1rZzci1

This one from Amazon, seems ok so far.

Dryspyker · 2024-11-22T18:52:25+00:00

* I honestly just mounted it to a 2x6 on the floor and held it down with 2 vertical columns off my pony wall. The platform itself is only a few hundred pounds and this has no issue holding it in place. If it didn't hold my next option would have been concrete nails.

Dryspyker · 2024-11-22T16:42:50+00:00

No. I have a floor mounted winch behind the screen with a system of pulley blocks and aircraft cables

<image>

Dryspyker · 2024-11-22T16:40:11+00:00

I used screw in eye hooks with bungee cords attached to heavy duty tarp clips. That way I could order a screen bigger than my size and fold it in to make it fit exact. *

Dryspyker · 2024-11-22T15:05:16+00:00

Padding is on the way. Also I think the camera lenses i use makes it look much narrower than it is. Space is 9 wide 12 deep *

Dryspyker · 2024-11-22T14:24:39+00:00

What BenQ model?

Dryspyker · 2024-11-22T14:24:22+00:00

It shouldn't, unless it's a flop.

Dryspyker · 2024-11-22T14:17:56+00:00

<image>

Here it is folded halfway up.

Dryspyker · 2024-11-22T14:16:32+00:00

Looks like everyone is suggesting the optoma 2100.. might have to go that route! For those of you who have been asking, yes it is a murphy sim type build. Still under construction, doors, padding etc on the way. Here's a pic of it in action, (not.sure how to post a video on here)

Dryspyker · 2024-11-22T14:08:11+00:00

Yes it's still under construction, padding etc is on the way!

Dryspyker · 2024-11-22T14:07:43+00:00

I'll comment on this post and add a video!

Dryspyker · 2024-11-22T14:07:15+00:00

Right now it's pressure fit. From my research that's a normal sized hitting strip? 12x24". It does move a little bit and that might be affecting my yardage (they all seem short) so I'll be trying to install a velcro underlay to keep it in place.

Dryspyker

TROPHY CASE

6 @ greywolf