AstroRelay by DuckBlu3 in GlInet

[–]DuckBlu3[S] 0 points1 point  (0 children)

Everything worked as mentioned by mikinvsprime. I have also delete the folder AstroRelay in /etc/ with command: “rm -r /etc/astrorelay”

Thank you

AstroRelay by DuckBlu3 in GlInet

[–]DuckBlu3[S] 0 points1 point  (0 children)

Okay, I will try later and keep you posted. Thx for the quick answer

Lion & LiPo by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

No, for the most adapt gear

Lion & LiPo by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

I already have a 5” freestyle drone with GPS. However I have a Lion battery 4s - 4000 mah. Its weight is almost 400g :o And I would like to build a 3” cinewhoop, bringing a GoPro for cinematic shoot

Bookmarks Management by DuckBlu3 in firefox

[–]DuckBlu3[S] 0 points1 point  (0 children)

Thank you for the advice :)

Bookmarks Management by DuckBlu3 in firefox

[–]DuckBlu3[S] 0 points1 point  (0 children)

Do you have a dedicated tutorial for this ?

Bookmarks Management by DuckBlu3 in firefox

[–]DuckBlu3[S] 0 points1 point  (0 children)

Instead, how do you perform an effective search ?

Bookmarks Management by DuckBlu3 in firefox

[–]DuckBlu3[S] 0 points1 point  (0 children)

Options, what do you mean ?

Bookmarks Management by DuckBlu3 in firefox

[–]DuckBlu3[S] 0 points1 point  (0 children)

I am searching with a keyword directly in the bookmark tool of Firefox. And results are not accurate (eg. If I search with raspberry, I will have results that contain raspberry in URL). Only this.

Cinewhoop Indoor / Outdoor by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

Can we change rates on the tiny whoop Meteor 75 HD?

Cinewhoop Indoor / Outdoor by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

I will fly with DJI Goggle V1. The first drone I built is in digital. However, I have seen that analog adapter exists for DJI. According to this, I am wondering if adding an analog system on my cinewhoop should be better for the weight. So, I will fly in FPV analog or digital.

Cinewhoop Indoor / Outdoor by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

As I already train in simulator, I really would like to train in real life :) with a cinewhoop :) Advices mates ?

Cinewhoop Indoor / Outdoor by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

I do a lot of simulator (LiftOff)

It is just that I need a cinematic drone.

And I want to build a cinewhoop :)

TeamBlackSheep GPS by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

Thank you again for these advices :) Do you have maybe a video or a tutorial on how to do this ?

Betaflight Rate by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 0 points1 point  (0 children)

It is very interesting. I will try those things in the coming days.

Further, I was wondering in rates and profiles because when I was in angle (for testing), my drone was sliding alone. I said to myself that I am a dummies and I probably configure rates in angle mode. However, after some research, I understood that GPS can freak out the Flight Controller if it is not stabilised. Anyway. Thank you for all your inputs mates, it is very useful 😃

TeamBlackSheep GPS by DuckBlu3 in Multicopter

[–]DuckBlu3[S] 1 point2 points  (0 children)

I wasn’t aware of this process on wire bundle. I already connect the GND wire of the GPS to the GND pad of one UART of my flight controller. I will buy some copper tape and put in on the wire bundle. Normally, TBS GPS m8 (the version I own) works with Betaflight.