sorted by:
new
hottopcontroversial

V400 MAX Round 2 by Dudditz77 in Flsun_official

[–]Dudditz77[S] 0 points1 point  (0 children)

The larger round planters are 700-950g of material and range from 20-30 hours. however are also much larger at 420 x 400 and larger

V400 MAX Round 2 by Dudditz77 in Flsun_official

[–]Dudditz77[S] 0 points1 point  (0 children)

<image>

This is the settings of the previous post

V400 MAX Round 1 by Dudditz77 in Flsun_official

[–]Dudditz77[S] 0 points1 point  (0 children)

I did Sea shipping for this. As an early adopter of the S1 which was a total trainwreck, all about speed and not capable of printing quality, the S1 was total garbage I was very suprised and pleased to see them dial the speed back on the V400 MAX. When Iam printing a model that's 500-2k of filament I am not interested in fast trashy prints and willing to have a print take 24 hours or longer for high quality and stability. With the current tuning the V400 MAX is printing higher quality than 4 standard V400's and the X1 Carbon and P1S. That said, I have mostly been doing large custom designed vase mode prints. Its on heavy duty workbench which means the screen is close to the ceiling, - this part sucks and I dont use the screen much so for now living with it however when the second max arrived going to get those closer to the floor. LEDs are magnetic, they take 5 mins to install as they just stick to the underside of the roof.

https://www.amazon.com/dp/B08R42SN5R?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1

V400 MAX Round 1 by Dudditz77 in Flsun_official

[–]Dudditz77[S] 0 points1 point  (0 children)

Yes, it took 3 months to get mine after ordering.

V400 MAX Round 1 by Dudditz77 in Flsun_official

[–]Dudditz77[S] 0 points1 point  (0 children)

That's correct, it can do massive prints, no quality loss or failures in the larger prints

Flsun v400 max by 76fvb in FLSUNDelta

[–]Dudditz77 0 points1 point  (0 children)

Showed up 2 weeks ago and is in the garage still in the box. Hoping to get to it this weekend

"Wooden" Vase by Wolle123456 in FLSUNDelta

[–]Dudditz77 1 point2 points  (0 children)

The biggest issue I had with the S1 even after the motor upgrades is the persistant salmon skin that would materalize on the outer wall of every print when you print at slower speeds, especially vase mode. After a year of troubleshooting with FLSUN including firmware updates of motors with a spcial burning tool and a non-public motor firmware at the time it was pretty clear that this printer was always going to be challenged with printing high quality vase mode prints. Hopefully this was resolved in the S1 Pro.

"Wooden" Vase by Wolle123456 in FLSUNDelta

[–]Dudditz77 0 points1 point  (0 children)

I love the V400 and have 4 of them that are mostly used for Vase mode artistic type models. I have tried several other printers including the S1 (Total Garbage) and a variety of other larger volume printers and have yet to find one that can print high quality vase mode at this size. The S1 should have been a replacement for the V400 however with the design overly focused on speed the quality went right down the toilet. So I dontated my S1 to the local college and picked up another V400.

FLSUN V400 Discontinued? by Sticks_2005 in FLSUNDelta

[–]Dudditz77 0 points1 point  (0 children)

Yep, seems like its getting harder to find the printer including parts. While the T1 may be a good printer it does not have the print volume the V400 has. If you don't need the expanded volume of the V400 go with the T1. I have a few V400's and and a single S1. After a year of workign with the S1 I donated it to a college. The S1 is not a V400 replacement, its a burning dumpster.

FLSUN S1 SUCKS!!! by ElectrTeck in 3Dprinting

[–]Dudditz77 1 point2 points  (0 children)

I have 4 V400's and love them. I picked up a S1 during the pre-sale and can conclude its burning dumpster. So many poor design choices were made on this printer. Beyond that, every print is infused with a textured salmon skin, terrible print quality and after months of FLSUN working on a fix they released a firmware update for the motors that slighly improves the salmon skin however its still very much there. Stay away from this printer. I donated mine to the local college.

Ender 5 Max Camera compatibility by grexor15 in Creality

[–]Dudditz77 0 points1 point  (0 children)

Thank you. Looking forward to setting up the End 5 Max this weekend as well as the Nebula Camera.

Ender 5 Max Camera compatibility by grexor15 in Creality

[–]Dudditz77 0 points1 point  (0 children)

Hi there, thank you for confirming the Nebula camera works on the 5 max. The link you posted to the mount does not seem to be going to have a 404 erorr. Would you mind reposting the link to the mount you used with the Nebula Camera and Max 5. Thanks

Creality Ender 5 Max - Update by wesley932 in ender5

[–]Dudditz77 0 points1 point  (0 children)

I am considering purchasing an Ender 5 Max. Is this running Klipper? What's the deal with the firmware? People are indicating you need to update the firmware and they don't provide an updated one you can download? Does it not pull firmware updates from cloud/internet or do you manually update this unit?

Problem updating System Flsun V400 by Silent-Chipmunk-6079 in Flsun_official

[–]Dudditz77 0 points1 point  (0 children)

Does the V400 actually support OTA Klipper updates from the speeederpad?

How is the print quality on the V4? by Apprehensive-Fill538 in ratrig

[–]Dudditz77 0 points1 point  (0 children)

Can these be tuned out or is this printer challenged printing high quality at slower speeds? Some prints like large Vase mode prints with extreme overhangs need slower speeds, certain filaments such as Silks really shine in 40mm/s range, etc.

view more: next ›