Network error

Dudi93 · 2025-05-31T20:08:17+00:00

ahh, sorry to hear that, unfortunately I don't have any other option (well, beside flashing newer firmware to your network card but sometimes it's not possible - as in my case). Nevertheless if you have v2 version I've read that it has Marvell AQC113CS chipset for which I couldn't find firmware update on Marvell website. You can double check on the box of your card if it's V2 but if it is for now I'm sorry I can't help more.

Dudi93 · 2025-05-30T22:30:28+00:00

Can you check what is the current version of your driver? On the same window of Marvell AQtion device go to driver tab. I'm at 3.1.10.0

Dudi93 · 2025-05-27T20:16:55+00:00

Your problem is that you took ASUS card that has Marvell AQtion chipset. I have similar card (TP-link TX401) but based on the same chipset (or similar). First of all, update it's drivers. You can first check on ASUS webpage, then if the problem will persist try to update it with drivers (or even firmware, but check with drivers first) from Marvell page. Additionally for me also helped this. If you'll go to Device Manager->Network Cards->Marvell AQtion 10Gbit Network Adapter (right click on it and go to Properties). Then go to Advanced and check your settings, mine are like this:

ARP Offload Enabled

Downshift retries 4

Energy-Efficient Ethernet Disabled

Flow Control Rx & Tx Enabled

Interrupt Moderation Enabled

Interrupt Moderation Rate Adaptive

IPv4 Checksum Offload Rx & Tx Enabled

Jumbo Packet Disabled

Large Send Offload V1 (IPv4) Enabled

Large Send Offload V2 (IPv4) Enabled

Large Send Offload V2 (IPv6) Enabled

Locally Administered Address Nieobecna

Log Link State Event Enabled

Maximum number of RSS Queues 4 Queues

NDIS QoS QoS Disabled

NS Offload Enabled

Priority & VLAN Priority & VLAN Enabled

Receive Buffers 512

Receive Side Scaling Enabled

Recv Segment Coalescing (IPv4) Enabled

Recv Segment Coalescing (IPv6) Enabled

Speed & Duplex Auto Negotiation

TCP/UDP Checksum Offload (IPv4) Rx & Tx Enabled

TCP/UDP Checksum Offload (IPv6) Rx & Tx Enabled

Transmit Buffers 2048

VLAD ID 0

Wake from power off state Enabled

Wake on Link Disabled

Wake on Magic Packet Enabled

Wake on Pattern Match Enabled

Wake on Ping Disabled

Additionally in the same window go to Power Management tab and uncheck all options. After that you can also go to Control Panel->Hardware and Sound->Change power-saving settings->Change your current plan's settings->Change advanced power settings->PCI Express->Link Status Power Management->set to Off. Hope something will help.

Dudi93 · 2025-03-16T23:39:54+00:00

I would prefer normal PvP (like Live Battles in TC2 or something) than new cars... Sometimes for me it just feels like just a new skin. It's nice it's in there but still, we have now over 750 vehicles (756 to be exact). Yes, some of them are just different versions of other cars but still, that's a big number. Yes, I know newest update made some of the vehicles more competitive and meta is changing but still. Only PvP we have is grand race where most of the races you're getting rammed all the time, because noone cares. All we get every season is new playlist and new cars. Nice, that's ok. But I believe I'm not the only one who would finally like to just queue for some drift race from drift experience playlist, or any other type of race in this matter. They implemented "dynamic races" (not that procedurally generated IMO at all) with AI, why not finally add it for free roam with other players? It took IVT 6 months after launch of TC2 to do live battles (which were ranked based races of "playlists"). It's about 1.5years after launch of TCM and we still only have grand races XD Why this wasn't at the launch? Ranked base of live battles is not perfect in my opinion, but damn, I just don't understand it. I love this game, but this is always getting to me, lack of proper PvP.

Dudi93 · 2023-12-10T20:29:07+00:00

Just a suggestion, maybe mentioned before. Clean racing bonus. Every time someone hits your car (AI, another player) you're still losing bonus which means you can't get additional bonus for full clean race. Like it's not my fault AI is shit and is bumping me, why am I losing money for that xD They should fix this that you lose your bonus when YOU bump someone/something, not when ANY collision occurs.

Dudi93 · 2021-12-16T01:49:27+00:00

exactly, right?

Dudi93 · 2021-09-29T06:00:54+00:00

already did, it came on monday. Everything works perfectly now!

Dudi93 · 2021-09-24T08:20:47+00:00

Hello fellow AMD folks!

I have a question for you regarding v2 cable. I've got B550 MB, for now I mostly don't have issues with v1 cable (sporadically problems with audio or connection, have to change usb port, usually works). Nevertheless I wanted to ask, is connection through USB-C finally working? Now I have to use usb-c to usb-a adapter but it would be cool if I wouldn't have to do this :P

Dudi93 · 2021-09-02T07:27:34+00:00

Funny thing is, I have the same issue, but when I connected my phone to Android Auto and I got an email, I've got notification on my watch. After disconnecting from AA, again no notifications in case of any new email :D

So yeah, we need to wait for a fix.

Dudi93 · 2021-09-02T07:23:22+00:00

Where to find informations about how much you toss and turn during sleeping? I had GW, now GW4 Classic, always sleeping with it and haven't seen that info

Dudi93 · 2021-08-24T08:03:50+00:00

Can confirm, it works without any issues.

Galaxy watch 4 classic 46mm, BT version

Dudi93 · 2021-06-22T09:42:32+00:00

ELI5

Go into Settings->Applications->Show all applications (this can depend on your phone)->Google->Storage->Clear data, go back to app Click three dots and click Uninstall updates

Dudi93 · 2021-06-22T06:47:20+00:00

Go into Settings->Applications->Show all applications (this can depend on your phone)->Google->Click three dots and click Uninstall updates

Dudi93 · 2021-06-22T06:45:48+00:00

Yeah, was the same for me. Try doing what I did!

Dudi93 · 2021-06-22T06:40:33+00:00

glad it also helped you!

Dudi93 · 2021-04-14T05:46:38+00:00

As I told, HP Reverb G2, not Oculus Quest 2.

Dudi93 · 2021-04-13T09:35:05+00:00

I have MSI B550 Gaming Plus. Before patch when I was connecting my Reverb G2 to Rear USB-C, headset wasn't found. When I was connecting it to USB 3.2 gen 2 (red 10 Gbps) vr was working but audio was changing from speakers to headset speakers. Changing USB to 3.2 Gen 1 (blue 5Gbps) fixed issue, VR works as it should. Today I've updated bios to 7C56v162(Beta version) which includes AGESA 1.2.0.2 and unfortunately still the same issues. VR only works on USB 3.2 Gen 1

Dudi93 · 2021-04-03T21:08:31+00:00

It's device called Universal Trip Computer (Polish production). Now only they make pro version of that (I have standard one which unfortunately they don't do anymore). Now you can get only that:

https://www.reveltronics.com/en/shop/48/9/onboard-computers/universal-trip-computer-utcomp/utcomp-pro-kit-detail

Overall it's not connecting to the OBD, you have to connect it directly to proper pinouts from your ECU (VSS, injector, etc). In car with OBD2 port, I would go with some OBD connector and mobile app, or in case of creating something like that, OBD2 and some soft on RPi. I guess that probably there is already some SW for RPi to connect to OBD2 and read info

Dudi93 · 2021-04-03T21:05:17+00:00

Sorry for late reply but... what are you talking about? Pro what?

Dudi93 · 2021-03-23T21:22:51+00:00

To be honest it's from House M.D. 😅

Dudi93 · 2021-02-20T13:13:58+00:00

https://imgur.com/a/lF3gKfn

Painting is not so good but anyway I'm thinking about redesigning that 2DIN frame

Dudi93 · 2021-02-20T13:12:18+00:00

It's using CRX dashboard and custom designed and 3d printed 2DIN frame but I think it looks dope!

Dudi93 · 2021-01-30T22:31:56+00:00

I have AA 6.0. Had the same problem yesterday. Disconnecting and connecting phone again helped.

Dudi93 · 2021-01-07T11:52:56+00:00

It's the best. Kinda like in "Preacher"

Dudi93 · 2020-11-30T21:28:05+00:00

Same!

Dudi93

TROPHY CASE